LDC30F ETC2

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

Universal input (AC85-264V) Small and compact PCB construction UL recognized, TV approved, CSA certified Built-in Inrush Current Protection Built-in Over Current Protection Built-in Over Voltage Protection RoHS Compliant Safety Agency Approvals Complies with DEN-AN UL1950, CSA C22.2 No.234, EN60950, VDE0160 EMI Compliance FCC-B CISPR22-B EN55022-B VCCI-B 2 year warranty(refer to Instruction Manual)

V1 +5V 3.0 (Peak 4.5)A +5V 3.0 (Peak 4.5)A V2 +12V 1.2 (Peak 2.0)A +15V 1.0 (Peak 2.0)A V3 -12V 0.3 (Peak 0.45)A -15V 0.3 (Peak 0.45)A SPECIFICATIONS MODEL LDC30F-1 LDC30F-2 INPUT VOLTAGE[V] AC85 - 264 1 for DC110 - 370 CURRENT[A] ACIN 100V 0.8typ (Io=100%) FREQUENCY[Hz] 47 - 440 or DC EFFICIENCY[%] ACIN 100V 72typ (Io=100%) INRUSH CURRENT[A] ACIN 100V 25typ (Io=100%)( At cold start ) ACIN 200V 50typ (Io=100%)( At cold start ) LEAKAGE CURRENT[mA] 0.75max (60Hz, According to UL, CSA, VDE and DEN-AN) OUTPUT VOLTAGE[V] +5 +12 -12 +5 +15 -15 LINE REGULATION[mV] 20max 48max 48max 20max 60max 60max LOAD REGULATION[mV] 100max 120max 150max 100max 120max 150max RIPPLE[mVp-p] 0t o+ 5 0C*2 100max 120max 120max 100max 120max 120max -10 - 0C*2 150max 160max 160max 150max 160max 160max RIPPLE NOISE[mVp-p] 0t o+ 5 0C*2 120max 150max 150max 120max 150max 150max -10 - 0C*2 170max 180max 180max 170max 180max 180max TEMPERATURE REGULATION[mV] 0t o+ 5 0C 50max 350max 350max 50max 350max 350max - 1 0t o+ 5 0C 60max 420max 420max 60max 420max 420max DRIFT[mV] *3 20max xx xx 20max xx xx START-UP TIME[ms] 100max (ACIN 85V, Io=100%) HOLD-UP TIME[ms] 10typ (ACIN 85V, Io=100%), 20typ (ACIN 100V, Io=100%), 100typ (ACIN 200V, Io=100%) OUTPUT VOLTAGE ADJUSTMENT RANGE[V] Fixed Fixed Fixed Fixed Fixed Fixed PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically OVERVOLTAGE PROTECTION Works at 115 - 140% of rating (+5V only) OPERATING INDICATION Not provided REMOTE SENSING Not provided REMOTE ON/OFF Not provided ISOLATION INPUT-OUTPUT AC3,000V 1minute, Cutoff current = 10mA , DC500V 50MWmin (At Room Temperature) INPUT-FG AC2,000V 1minute, Cutoff current = 10mA , DC500V 50MWmin (At Room Temperature) OUTPUT-FG AC500V 1minute, Cutoff current = 100mA , DC500V 50MWmin (At Room Temperature) OUTPUT-OUTPUT(V1-V2,V3) AC100V 1minute, Cutoff current = 100mA , DC100V 10MWmin (At Room Temperature) ENVIRONMENT OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +60C, 20 - 90%RH (Non condensing)( Refer to DERATING CURVE), 3,000m (10,000feet) STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) VIBRATION 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X , Y and Z axis IMPACT 196.1m/s2 (20G), 11ms, once each X, Y and Z axis SAFETY AND NOISE REGULATIONS AGENCY APPROVALS UL60950-1, EN60950-1, EN50178, CSA C22.2 No.234 Complies with DEN-AN and IEC60950-1 CONDUCTED NOISE Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B OTHERS CASE SIZE/WEIGHT 65X26X140mm (WXHXD) / 220g max (without chassis and cover) COOLING METHOD Convection *1 Peak load for 10sec. or less is acceptable if the total wattage is less than the rated wattage(-1: 33W, -2: 34.5W).When the load of +5V is OA, other output can be drawn by 80% of rated current. *2 Measured by 20MHz oscilloscope or Ripple-Noise meter (equivalent to KEISOKU-GIKEN:RM101). *3 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25Cwith the input voltage held constant at the rated input/output. * Avoid prolonged use under over-load. * Derating is required when operated with chassis and cover. LDC30F Rugged PCB type LD C 30 F -1 - O

Ordering information

C :with Coating G :Low leakage current S :with Chassis SN :with Chassis & cover Y :with Potentiometer R 123456 LDC F-18

¡DERATING CURVE¡OVERCURRENT CHARACTERISTICS (LDC30F-1) ¡RISE TIME & FALL TIME (LDC30F-1)¡STATIC CHARACTERISTICS (LDC30F-1) LDC F-19 LDC30F External view ¶ Weight: 220g or less(without chassis and cover) ¶ Tolerance: t1 ¶ Dimensions in mm. ¶ PCB Material: Glass composite(CEM3) ¶ Chassis and cover is optional. ¶ Mounting torque: 0.6N·m(6.3kgf·cm)max Performance data