DATASHEET SEARCH SITE

Document overview

  • PDF pages: 7

Technical content

Page 1

Parameter Rating Units
Load Voltage 60 V P
Load Current 1 A / A rms DC
On-Resistance (max) 0.6
LED Current to Operate 2 mA

Features

  • 1A Load Current
  • 0.6 Max On-Resistance
  • 2mA Control Current
  • 3750Vrms Input/Output Isolation
  • Low Drive Power Requirements (TTL/CMOS Compatible)
  • No Moving Parts
  • High Reliability
  • Arc-Free With No Snubbing Circuits
  • No EMI/RFI Generation
  • Machine Insertable, Wave Solderable
  • Small 6-Pin Package
  • Tape & Reel, Surface Mount Version Available

Applications

  • Sensor Circuitry
  • Instrumentation
  • Multiplexers
  • Data Acquisition
  • Electronic Switching
  • I/O Subsystems
  • Meters (gas, oil, electric and water)
  • Medical Equipment-Patient/Equipment Isolation
  • Security
  • Aerospace
  • Industrial Controls

e3

Pb

DS-LCB710-R02

Single-Pole, Normally Closed

OptoMOS® Relay

Description

LCB710 is a single-pole normally closed (1-Form-B) solid state relay that uses optically coupled technology to provide an enhanced 3750Vrms isolation barrier between the input and the output of the relay. The efficient MOSFET switches use IXYS Integrated Circuits Division's patented OptoMOS architecture. The optically coupled output is controlled by a highly efficient GaAlAs infrared LED.

Approvals

  • UL Recognized Component: File E76270
  • CSA Certified Component: Certificate 1175739
  • EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 004

Ordering Information

Part # Description
LCB710 6-Lead DIP (50/Tube)
LCB710S 6-Lead Surface Mount (50/Tube)
LCB710STR 6-Lead Surface Mount (1000/Reel)

Pin Configuration

AC/DC Configuration 1

6

+ Control

Load

2

5

– Control

Do Not Use

3

4

Do Not Use

Load

DC Only Configuration

PDF page 1 diagram

+ Control

– Control

Do Not Use

Switching Characteristics of Normally Closed Devices

PDF page 1 diagram

Page 2

Absolute Maximum Ratings @ 25ºC

Parameter Ratings Units
Blocking Voltage 60 V P
Reverse Input Voltage 5 V
Input Control Current Peak (10ms) 50 mA
1 A
Input Power Dissipation 1 100 mW
Total Power Dissipation 2 800 mW
Isolation Voltage, Input to Output 3750 V rms
ESD Rating, Human Body Model 8 kV
Operational Temperature -40 to +85 °C
Storage Temperature -40 to +125 °C

1 Derate linearly 1.33 mW / ºC 2 Derate linearly 6.67 mW / ºC

Electrical Characteristics @ 25ºC

Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied.

Parameter Conditions Symbol Min Typ Max Units
Output Characteristics
Load Current AC/DC Configuration, Continuous DC Configuration, Continuous Peak I=0mA F I L - - 1 A / A rms DC
- - 2 A DC
I=0mA , t < 10ms F I LPK - - ±5 A P
On-Resistance 1 AC/DC Configuration DC Configuration I=0mA, I=1A F L R ON - 0.39 0.6
I=0mA, I=2A F L - 0.1 0.2
Switching Speeds Turn-On Turn-Off I=5mA, V=10V F L t on - 0.63 3 ms
t off - 1.5 3
Off-State Leakage Current I=2mA, V=60V F L I LEAK - - 1 A
Output Capacitance I=2mA, V=50V, f=1MHz F L C OUT - 125 - pF
Input Characteristics
Input Control Current to Activate I=1A L I F - 0.22 2 mA
Input Control Current to Deactivate - I F 0.1 0.21 - mA
Input Voltage Drop I=5mA F V F 0.9 1.2 1.4 V
Reverse Input Current V=5V R I R - - 10 A
Common Characteristics
Capacitance, Input to Output - C I/O - 3 - pF

1 Measurement taken within 1 second of on-time.

Page 3

PERFORMANCE DATA\* (@25ºC Unless Otherwise Noted)

Typical Turn-On Time

Typical LED Forward Voltage Drop

Typical Turn-Off Time

(N=50)

(N=50, IF=5mA)

(N=50, IF=5mA)

PDF page 3 diagram
PDF page 3 diagram
PDF page 3 diagram

LED Forward Voltage (V)

Turn-On Time (ms)

Turn-Off Time (ms)

Typical On-Resistance Distribution

Typical IF for Switch Operation

Typical Blocking Voltage Distribution

(N=50, IL=1A)

(IL=1A)

(N=50, IF=2mA)

PDF page 3 diagram
PDF page 3 diagram
PDF page 3 diagram

On -Resistance (:)

LED Current (mA)

Blocking Voltage (VP)

Typical Turn-On Time

Typical Turn-Off Time

vs. LED Forward Current

vs. LED Forward Current

LED Forward Voltage

(IL=100mA)

vs. Temperature

(IL=100mA)

PDF page 3 diagram
PDF page 3 diagram
PDF page 3 diagram

LED Forward Current (mA)

LED Forward Current (mA)

Temperature (ºC)

Typical Turn-On Time

Typical Turn-Off Time

Typical IF for Switch Operation

vs. Temperature

vs. Temperature

vs. Temperature

(IF=5mA, IL=100mA)

(IF=5mA, IL=100mA)

(IL=100mA)

PDF page 3 diagram
PDF page 3 diagram
PDF page 3 diagram

Temperature (ºC)

Temperature (ºC)

Temperature (ºC)

\*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please contact our application department.

Page 4

PERFORMANCE DATA\* (@25ºC Unless Otherwise Noted)

Typical Load Current vs. Load Voltage

Maximum Load Current vs. Temperature

Typical On-Resistance vs. Temperature

AC/DC Configuration

AC/DC Configuration

AC/DC Configuration

(IF=0mA)

(IF=0mA, IL=500mA)

(IF=0mA)

PDF page 4 diagram
PDF page 4 diagram
PDF page 4 diagram

Temperature (ºC)

Temperature (ºC)

Load Voltage (V)

Load Current vs. Load Voltage

Maximum Load Current vs. Temperature

Typical On-Resistance vs. Temperature

DC-Only Configuration

DC-Only Configuration

DC-Only Configuration

(IF=0mA)

(IF=0mA)

(IF=0mA, IL=1A)

PDF page 4 diagram
PDF page 4 diagram
PDF page 4 diagram

Temperature (ºC)

Temperature (ºC)

Load Voltage (V)

Typical Leakage Current

Output Capacitance

Typical Blocking Voltage

vs. Load Voltage

vs. Temperature

vs. Temperature

(IF=2mA, f=1MHz)

(IF=2mA)

(IF=2mA, VL=60V)

PDF page 4 diagram
PDF page 4 diagram
PDF page 4 diagram

Temperature (ºC)

Load Voltage (V)

Temperature (ºC)

Energy Rating Curve

PDF page 4 diagram

Time

\*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please contact our application department.

Page 5

Manufacturing Information

Moisture Sensitivity

All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below.

Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability.

This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.

Device Moisture Sensitivity Level (MSL) Rating
LCB710 / LCB710S MSL 1

ESD Sensitivity

This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.

Reflow Profile

This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed.

Device Maximum Temperature x Time
LCB710 / LCB710S 250ºC for 30 seconds

Board Wash

IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used.

e3

Pb

Page 6

Mechanical Dimensions

PCB Hole Pattern

PDF page 6 diagram

8.382 ± 0.381

PDF page 6 diagram

(0.330 ± 0.015)

PDF page 6 diagram

LCB710S

PDF page 6 diagram

7.620 ± 0.254 (0.300 ± 0.010)

3.302 ± 0.051 (0.130 ± 0.002)

PDF page 6 diagram

6 - 0.800 DIA.

PDF page 6 diagram

(0.010 ± 0.0005)

(0.250 ± 0.005)

(0.200 ± 0.005)

Dimensions mm (inches)

PCB Land Pattern

0.635 ± 0.127 (0.025 ± 0.005)

2.54 (0.10)

8.90 (0.3503)

1.65

0.254 ± 0.0127

(0.0649)

(0.010 ± 0.0005)

0.65 (0.0255)

Dimensions mm (inches)

Page 7

LCB710STR Tape & Reel

PDF page 7 diagram
PDF page 7 diagram

K0 = 4.90 (0.19) K1 = 3.80

Dimensions

User Direction of Feed

(0.15)

mm (inches)

NOTES:

  1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2

For additional information please visit our website at: www.ixysic.com

IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.

The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.

Specification: DS-LCB710-R02 ©Copyright 2012, IXYS Integrated Circuits Division OptoMOS® is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/22/2012