L8506 HAMAMATSU

Document overview

  • PDF pages: 2

Technical content

Page 1

PDF page 1 diagram

When an LED is used for optical encoders, it must emit a uniform, small spot light. L8506 is an infrared LED that emits such a light beam collimated by the combination of an aspheric lens. L8506 uses a non-confined structure chip that does not show an abrupt deterioration often encountered with some types of confined chips. The structure of L8506 is also designed to have high resistance to cyclic temperature changes so it copes with tough environmental conditions required for optical encoders used in factories.

PDF page 1 diagram

l High-speed response: 40 MHz Typ. l High reliability

I Absolute maximum ratings (Ta=25 °C, unless otherwise noted)

PDF page 1 diagram
PDF page 1 diagram
Symbol Condition Value
VR 5
IF 80
- 0.67
IFP Pulse width=10 µs Duty ratio=1 % 0.5
- 7
P 150
Topr -30 to +85
Tstg -40 to +100

I Electrical and optical characteristics (Ta=25 °C)

PDF page 1 diagram
PDF page 1 diagram
Symbol Condition Min. Typ. Max.
λp IF=50 mA 840 870 900
∆λ IF=50 mA - 45 -
φe IF=50 mA 3.4 5.8 -
VF IF=50 mA - 1.6 1.75
IR VR=5 V - - 5
IF=30 mA - 4.3 -
fc IF=30 mA ± 4 mAp-p 25 40 -
PDF page 1 diagram

Page 2

I Directivity

(Typ. Ta=25 ˚C)

20˚ 10˚ 0˚ 10˚ 20˚

PDF page 2 diagram

RELATIVE RADIANT OUTPUT (%)

KLEDB0226EA

I Radiant output vs. ambient temperature

(Typ. IF=50 mA)

PDF page 2 diagram

AMBIENT TEMPERATURE (˚C)

KLEDB0228EA

I Relative light intensity distribution

PDF page 2 diagram

POSITION ON IMAGE SENSOR (mm)

KLEDB0230EA

Infrared LED L8506

I Forward current vs. forward voltage

(Typ. Ta=25 ˚C)

PDF page 2 diagram

FORWARD VOLTAGE (V)

KLEDB0227EA

I Allowable forward current vs. ambient temperature

(Typ.)

PDF page 2 diagram

AMBIENT TEMPERATURE (˚C)

KLEDB0229EB

I Dimensional outline (unit: mm)

PDF page 2 diagram

KLEDA0072EC

Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2002 Hamamatsu Photonics K.K.

HAMAMATSU PHOTONICS K.K., Solid State Division

1126-1 Ichino-cho, Hamamatsu City, 435-8558 Japan, Telephone: (81) 053-434-3311, Fax: (81) 053-434-5184, http://www.hamamatsu.com U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658 France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777

North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01

Cat. No. KLED1035E02

Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741

Feb. 2002 DN