L6605

L7684 HAMAMATSU

Document overview

• PDF pages: 4

Technical content

Page 1

FEATURES

High Stability: Fluctuation (p-p) 3 % Max. High Input Energy: 1 J (per one flash) Long Life: 8 × 107 flashes Min. Short Arc: 3 mm

BUILT-IN REFLECTIVE MIRROR

L7684, L7685/L6604, L6605

PATENT PENDING

Spectral Distribution: 190 nm to 2000 nm (Sapphire glass window type) High Repetition Rate Meeting TV rate: 60 Hz Short flash pulse-width (FWHM): 2.90 µs (at 2 µF, 1000 V)

Built-in Reflective Mirror/1.5 Times Brighter (L7684, L7685)

APPLICATIONS

Stroboscope for FA High Speed Image Processing Industrial Stroboscope Pollution Analysis etc.

CHARACTERISTICS

NOTE: Average input energy (E) is calculated by the below formula. a E = 1/2 CV2 E: Average input energy (J) C: Main discharge capacitor value (F) V: Main discharge voltage (V dc) bAverage Input(W) is calculated by the below formula. W = E × f f: Repetition frequency (repetition rate) cAt 1 J/flash (60 W) input. Maximum 100 Hz operation is possible with keeping average input 60 W or lower. dAt 1 J/flash input energy (60 W) with using the cooling jacket of E6611. eIt is necessary to have an additional external capacitor E7289-01 for 60 W input, when 1 J/flash input energy is needed. fIt has to be used for the operation more than 15 W input.

Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2001 Hamamatsu Photonics K.K

Page 2

Figure 2: Flash Pulse Waveforms (L6604, L6605)

Figure 1: Spectral Distribution

TIME (2 µs/div.)

WAVELENGTH (nm)

Figure 4: Dimensional Outline (Unit: mm)

Figure 3: Life Characteristics

L7684, L7685

(Built-in Reflective Mirror)

TLSXB0083EC

REFLECTIVE

ANODE 1 TRIGGER PROBE 2

5 3 TRIGGER PROBE

SPARKER 4 CATHODE

(100) (200) (300) (400) (500)

TLSXA0082EA

NUMBER OF FLASHES

L6604, L6605

\*( ) OPERATING TIME [h]

MAIN DISCHARGE VOLTAGE: 1 kV MAIN DISCHARGE CAPACITOR: 2 µF REPETITION RATE: 60 Hz INPUT ENERGY: 1 J / FLASH

The life end is defined as the time when the radiant intensity falls to 50 % of its initial value or when the output flutuation exceeds ±3 %.

ANODE 1 TRIGGER PROBE 2

TRIGGER PROBE

SPARKER CATHODE

TLSXA0049EC

Page 3

RELATED PRODUCTS

Trigger Socket E6647

In order to operate a Xenon flash lamp, it is necessary to supply the prescribed high voltage between anode and cathode, and to trigger probes. To facilitate the above operation, the trigger socket consists of high voltage transformer and voltage divider resistors and capacitors chain to supply the appropriate pulse voltage to each electrode. As E6647 radiates heat from its metal parts during the operation due to the input energy, it is recommended to use a cooling fan to keep the surface temperature of the metal parts at less than 50 °C.

Dimensional Outline (Unit: mm)

14.8±0.1

METAL

5.5

28.5±1.0

Power Supply C6096

C6096 has large capability to operate the lamp stable in spite of its compact dimensions. At 1 J/flash input energy becomes over 0.05 J, it is necessary to have an additional external capacitor E7289-01 (option).

Specifications

Dimensional Outline (Unit: mm)

2-M3

of 60 W Xenon flash lamp series. h In the case of connects temperature sensor lead lines from the cooling jacket, the output voltage becomes 0 V

TLSXA0051EA

when the temperature sensor turns on. i At 1 J/flash input energy becomes over 0.05 J, it is necessary to have an additional external capacitor E7289-01 (option). j Don’t use beyond 60 Hz at the operation of 60 W input. k A trigger pulse voltage is supplied to each electrode at the same time as an input trigger signal rise.

Page 4

Cooling Jacket E6611

This cooling jacket is exclusively designed for 60 W Xenon flash lamps will keep the temperature of the lamp and electric parts such as the trigger socket at less than maximum ratings and maintain at even temperature by a built-in cooling fan, and offers the stable operation of the lamp. It has to be used for the operation of more than 15 W input.

Dimensional Outline (Unit:mm)

\* The temperature sensor is for the protection of a lamp, a

TEMPERATURE SENSOR\*

trigger socket and a power supply, when it detects an ab-

35

65

SETTING HOLES 2-M4 × P1

nornal high temperature due to out of work with the cool-

TRIGGER SOCKET

TRIGGER SOCKET LAMP

ing fan. When lead lines of temperature sensor are con-

SHIELD CABLE

nected to the protection circuit terminal of C6096 exclusive power supply, the power supply will stop its operation.

COOLING FAN (RATING : 24 V, 0.1 A dc)

21.0±1.5

175±3

Light-Guides

Light-guides are effective to guide the output light into a place where does not allow to direct irradiation due to its construction or to plural places simultaneously. A short arc of 60 W Xenon flash lamps allows the light into the light-guides effectively. As the standard option, two types of light guide are available from us upon your application. Please refer to below table.The light-guides holder for the cooling jacket is also available from Hamamatsu. (The light-guides holder will be included for the combination order of the cooling jacket and the standard light-guides.)

External Main Discharge Capacitor E7289-01

The exclusive main discharge capacitor (2 µF) for 60 W (1 J/Flash, 60 Hz) inputs the operation of 60 W Xenon flash lamp series. It allows to operate safely by easy connection with a power supply.

Warranty

RED: Cooling fan input voltage (+24 V) BLACK: Cooling fan GND YELLOW: Temperature sensor BLUE: Temperature sensor

TLSXA0052EB

Dimensional Outline (Unit: mm)

1000

25 30

60 10 33

SUS FLEXIBLE TUBE 10

TLSXA0062EA

Dimensional Outline (Unit: mm)

100 ± 3

160 ± 3

320

2-M3

78 ± 1 TLSXA0053ED

The warranty period will be one year following the date of shipment or specified life time whichever comes first. The area of warranty is Iimited to replacement of the faulty lamp. Faults resulting from natural disasters and improper usage will also be excluded from warranty.

\* PATENT PENDING : JAPAN 1

HOMEPAGE URL http://www.hamamatsu.com

HAMAMATSU PHOTONICS K.K., Electron Tube Center 314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: infos@hamamatsu.fr

United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se

TLSX1029E02

Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: info@hamamatsu.it

JUL. 2001 IP Printed in Japan (1000)