L100

L006 ENSIGN

Document overview

• PDF pages: 4

Technical content

Page 1

Flame Retardant Material

 Flame Retardant, UL 94V0 Rating

 High Efficiency

 2.4VA to 100VA Power Rating

 Single or Dual Primary, 115V, 115/230V or 230V (Optional 120, 120/240, 240, 277, or 240/277V)

 50/60Hz (Economy 60Hz-only Models Available)

 Center-tapped Secondary (Optional Single or Dual)  Any Secondary Voltage from 5V to 120V in 1V Increments

 Insulation Material 130oC Standard (Optional 200oC)

 Optional Internal Current or Thermal Protector

 High Isolation, 2500 Vrms, 100% Tested  Low Capacitive Coupling, no Electrostatic Shield Needed

 Color Coded Hook-up Wires

Agency Approvals:

 UL/cUL 5085-2 Recognized (File E47299)  UL 1446 Recognized Insulation system (File E95662)  UL/cUL 5085-3 Class 2 Recognized (File E43609), Only L002 (up to 24V)

(Specify 115V or (Specify 230V or

(277V)

WHT=COM

(Specify 115/230V

120V) 240V)

BRN=240V or 120/240V)

VIO=277V

Secondary Schematics

Output

Output

Take advantage of these pre-designed models, or let us customize to your requirements. That’s our specialty.

300 W Factory Rd., Addison, IL 60101 • Ph: (630) 628-9999 • Fax: (630) 628-9922 • www.ensigncorp.com 18

Page 2

Partial Selection Guide (Standard Stock)

Models marked with \* are also UL 5085-3 Class 2 recognized (see Page 22)

Take advantage of these pre-designed models, or let us customize to your requirements. That’s our specialty.

300 W Factory Rd., Addison, IL 60101 • Ph: (630) 628-9999 • Fax: (630) 628-9922 • www.ensigncorp.com 19

Page 3

Commander Class (continued)

Partial Selection Guide (Standard Stock)

Over 159,000 additional Commander Class model configurations available! Refer to the Part Numbering Scheme on the next page to configure your own part with following options: 



Primary: 120V, 120/240V, 240V, 277V, or 240/277V

With or without current or thermal protector(s)

 Secondary: 5V to 120V, in 1V increments

 Temperature Class: 130C, or 200C

 Frequency: 50/60Hz, or economy 60Hz-only

Take advantage of these pre-designed models, or let us customize to your requirements. That’s our specialty.

300 W Factory Rd., Addison, IL 60101 • Ph: (630) 628-9999 • Fax: (630) 628-9922 • www.ensigncorp.com 20

Page 4

Class 2

Examples: L075-2A724X = 75VA, Dual 115/230V (series/parallel) Primary, 50/60Hz, 130C thermal cutoff, Single 24V Secondary

LXXX

-X

X XXX

X

XXXX

Frame Mount with Lead Wires

Rating:

L002 = 2.4VA, models up to 24V are also Class 2 (see Page 22)

L006 = 6VA L050 = 50VA

L012 = 12VA L056 = 56VA

L020 = 20VA L075 = 75VA

L030 = 30VA L100 = 100VA

L040 = 40VA Primary Voltages:

-1 = 120

-2 = 120/240 Dual (series / parallel)

-3 = 240

-4 = 277, unavailable on Class 2 models

-5 = 240/277 (tapped), unavailable on Class 2 models

Optional Internal Protector:

• (dash) = No internal protector

A through Z = Over-current and/or over-temperature protection (Contact for list of available protectors) Secondary Voltages (10 through 120, in 1V Increments):

010 through 120 = Dual Secondary (series / parallel) Number represents the voltage of the series connection. Example: “024” = 12V (parallel) / 24V (series)

510 through 620 = Center-tapped Secondary Number represents the total voltage plus 500. Example: “524” = 24V with center-tap (12V on each side)

710 through 820 = Single Secondary Number represents the voltage plus 700. Example: “724” = 24V

Indication of Adjustment in Primary Voltage:

Blank = 120V, 120/240V or 240V, as selected above

X = Primary 115V instead of 120 and/or 230V instead of 240V

Frequency:

Blank = 50/60Hz

-60HZ = Economy 60Hz-only

Take advantage of these pre-designed models, or let us customize to your requirements. That’s our specialty.

300 W Factory Rd., Addison, IL 60101 • Ph: (630) 628-9999 • Fax: (630) 628-9922 • www.ensigncorp.com 21