KPS10 ETC
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 1
Technical content
KPS10 PIPE CLAMP PROBE TYPE ‘K’ PIPE CLAMP PROBE - Type ‘K’
Description
This probe uses a pipe clamp to enable the user to easily contact the sensor onto a pipe. The construction ensures good thermal contact with the pipe surface. The clamps are suitable for use with pipes of up to 25mm diameter. Construction Pipe Clamp is fitted with a fine wire thermocouple mounted on a rubber support. The probe is fitted with 2M of curly Polyurethane cable, complete with moulded miniature plug. Sensor Features ¾ TOUGH POLYURETHANE CABLE
- Polyurethane cables are used in place of the standard polyurethane for the following reasons :-
- Greater retractability
- Enhanced memory of it’s curl
- Non–Toxic
- Greater mechanical strength for durability
- 12 X 0.2mm wires used internally for greater strength.
- PTFE inner insulation for strength and retractability. ¾ HIGH ACCURACY THERMOCOUPLE MATERIAL THROUGHOUT Type ‘K’ Thermocouple : Class I (±01.5°C ±0.25%) ¾ WIDE AMBIENT TEMPERATURE SPECIFICATION : -30 TO 50 °C ¾ TIME RESPONSE (96% of value in water) : 7.0 Secs ¾ MEASUREMENT RANGE : -50 TO 150 °C Cross-reference for compatible instruments Suitable instruments for use with this probe TME PART No DESCRIPTION APPLICATION MM2000 SINGLE INPUT INSTRUMENT HIGH ACCURACY TEMPERATURE MEASUREMENT MM2010 MAX / MIN HOLD INSTRUMENT HIGH ACCURACY INSTRUMENT WITH MAX, MIN AND HOLD FEATURES MM2020 DIFFERENTIAL INSTRUMENT DUAL INPUT INSTRUMENT FOR DIFFERENTIAL MEASUREMENTS MM2030 THERMOCOUPLE SIMULATOR HIGH ACCURACY SIMULATOR WITH MEASUREMENT FACILITY