G-NSDOG2-200 TEC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 4

Technical content

SENSOR SOLUTIONS /// DOG2 MEMS SERIES CAN J1939 INCLINOMETER 09/2017 Page 1

FEATURES

  • 8 – 30 VDC supply voltage
  • Digital signal processing includes o filter (e.g. vibration damping) o temperature compensation
  • 12 bit resolution
  • 100 Hz refresh rate
  • -40 °C – 85 °C temperature range
  • Accuracy typically o 0.15° | 25 °C

APPLICATIONS

  • Mobile and stationary cranes
  • Lift platforms
  • Building control
  • Weighing systems
  • Truck chassis levelling
  • Vehicle applications
  • Road construction machines DOG2 MEMS SERIES CAN J1939 INCLINOMETER SPECIFICATIONS
  • Dual axis inclinometer
  • Measurement ranges ±90°
  • CAN J1939 interface The DOG2 MEMS-Series inclinometer dual axis is mainly developed with focus on platform leveling, dynamic engine management, tip-over protection and tilt alarm. A fast response time and good accuracy makes this device the ideal choice for mobile leveling applications. It features digital si gnal processing including temperature compensation. The integrated filter improves performance and allows using the sensor in many noisy environments (e.g. vibrations). The inclinometer includes a powerful digital signal processing that offers various filt eralgorithms and allows customer specific OEM solutions. It is possible to adjust the sensor to different environments yielding an optimized performance. Customization can also be made in terms of angular range and connectivity, i.e. cable and connector. The PA6.6 housing is very compact in size and has compression limiter bushings for safe installation of the sensor. It is compatible with oil, grease and fuel also. Therefore it is frequently used for engine and vehicle applications.

DOG2 MEMS SERIES CAN J1939 INCLINOMETER SENSOR SOLUTIONS /// DOG2 MEMS SERIES CAN J1939 INCLINOMETER 01/2019 Page 2 Dimensions [mm] Vector of gravity (zero position)

DOG2 MEMS SERIES CAN J1939 INCLINOMETER SENSOR SOLUTIONS /// DOG2 MEMS SERIES CAN J1939 INCLINOMETER 01/2019 Page 3 PARAMETERS Parameter Value Comment Range ±90° Dual axis sensor Accuracy, typ. 0.5° T= -40 °C – 85 °C Accuracy, typ. 0.15° T= 25 °C Resolution 0.01° Limited by CAN protocol Refresh rate 100 Hz Internal processing Startup time <1 s After power cycle Supply/excitation voltage 8 – 30 V Direct current (DC) stabilized Supply current, typ. <30 mA Typ. 20mA, peak 30mA during transmit Output x-axis and y-axis Linearized and temperature compensated angles in degree, reference is plane perpendicular to vector of gravity = earth surface Interface SAE J1939 CAN2.0B 250 kbps Source Address: - G-NSDOG2-200: 0xC2 (fix) - G-NSDOG2-207: 0xC0 (default); settable in the range of [0x80 – 0xF7] Connector AMP Superseal 1.5-Series, 4-pos. cap housing, TE Connectivity part-no. 282106-1 Requires 4-pos. plug housing, AMP Superseal 1.5-Series at connecting harness, TE Connectivity part-no. 282088-1 Cable 4 wire 0.25 mm2, outer diameter Ø3.9 mm PUR, length incl. connector 400 mm, full temperature range, flexible Operation temperature range -40 °C – 85 °C Storage temperature range -40 °C – 85 °C Operating humidity Typical: ≤ 50 %RH Max: 90 %RH >80 less than 40% of time Storage humidity Typical: ≤ 40 %RH Max: 60 %RH Weight, typ. 60 g Dimensions 70.5 mm x 45 mm x 15 mm W x D x H CONNECTOR PINNING Pin Function Description

1 VCC 8 to 30 VDC supply input (+)

2 GND GND

3 CAN H CAN high line , in/out

4 CAN L CAN low line , in/out

The CAN J1939 detailed description is included in the specification, which is available on request.

DOG2 MEMS SERIES CAN J1939 INCLINOMETER SENSOR SOLUTIONS /// DOG2 MEMS SERIES CAN J1939 INCLINOMETER 01/2019 Page 4 FUNCTION VIEW This DOG2 MEMS series CAN J1939 inclinometer is designed for floor mount application.

ORDERING INFORMATION

PART NUMBER SHORT DESCRIPTION G-NSDOG2-200 Dual axis tilt sensor, range +/-90 deg, Vcc 8 – 30 VDC, CAN J1939 Interface G-NSDOG2-207 Dual axis tilt sensor, range +/-90 deg, Vcc 8 – 30 VDC, CAN J1939 Interface (Source address range [0xC0, 0x80 – 0xF7]; see specification for details) For other orientations, measurement ranges or supply voltages please contact TE Connectivity sales representatives. X-Axis Y-Axis www.te.com TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes o nly, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s ob ligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2017 TE Connectivity Ltd. family of companies All Rights Reserved. NORTH AMERICA TE Connectivity Sensors, Inc.

1000 Lucas Way

Hampton, VA 23666 United States Phone: +1-800-745-8008 Fax: +1-757-766-4297 Email: customercare.hmpt@te.com Web: www.te.com EUROPE TE Connectivity Sensors Germany GmbH Hauert 13 D-44227 Dortmund Germany Email:customercare.dtmd@te.com Web: www.te.com ASIA TE Connectivity Sensors China Ltd. No. 26, Langshan Road High-tech Park (North) Nanshan District, Shenzhen 518057 China Phone: +86-755-33305088 Fax: +86-755-33305099 Email: customercare.shzn@te.com Web: www.te.com