J107-E3

J107-E3 VISHAY

Document overview

• Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
• PDF pages: 6

Technical content

Document Number: 70230 S-04028—Rev. D, 04-Jun-01 www.vishay.com 7-1 N-Channel JFETs /C0080/C0082/C0079/C0068/C0085/C0067/C0084/C0032/C0083/C0085/C0077/C0077/C0065/C0082/C0089 Part Number VGS(off) (V) rDS(on) Max (/C0087) ID(off) Typ (pA) tON Typ (ns) J105 –4.5 to –10 3 10 14 J106 –2 to –6 6 10 14 J107 –0.5 to –4.5 8 10 14 /C0070/C0069/C0065/C0084/C0085/C0082/C0069/C0083 /C0066/C0069/C0078/C0069/C0070/C0073/C0084/C0083 /C0065/C0080/C0080/C0076/C0073/C0067/C0065/C0084/C0073/C0079/C0078/C0083 /C0068Low On-Resistance: J105 < 3 /C0087 /C0068Fast Switching—tON : 14 ns /C0068Low Leakage: 10 pA /C0068Low Capacitance: 20 pF /C0068Low Insertion Loss /C0068Low Error Voltage /C0068High-Speed Analog Circuit Performance /C0068Negligible “Off-Error,” Excellent Accuracy /C0068Good Frequency Response /C0068Eliminates Additional Buffering /C0068Analog Switches /C0068Choppers /C0068Sample-and-Hold /C0068Normally “On” Switches /C0068Current Limiters /C0068/C0069/C0083/C0067/C0082/C0073/C0080/C0084/C0073/C0079/C0078 The J105/106/107 are high-performance JFET analog switches designed to offer low on-resistance and fast switching. rDS(on) <3 /C0087 is guaranteed for the J105 making this device the lowest of any commercially available JFET. The low cost TO-226AA (TO-92) plastic package is available in a wide range of tape-and-reel options (see Packaging Information). For similar products in TO-206AC (TO-52) packaging, see the U290/291 data sheet. TO-226AA (TO-92) Top View D G S /C0065/C0066/C0083/C0079/C0076/C0085/C0084/C0069/C0032/C0077/C0065/C0088/C0073/C0077/C0085/C0077/C0032/C0082/C0065/C0084/C0073/C0078/C0071/C0083 Notes a. Derate 2.8 mW//C0095C above 25/C0095C

www.vishay.com 7-2 Document Number: 70230 S-04028— Rev. D, 04-Jun-01 /C0083/C0080/C0069/C0067/C0073/C0070/C0073/C0067/C0065/C0084/C0073/C0079/C0078/C0083/C0032/C0040/C0084/C0065/C0032/C0061/C0032/C0050/C0053/C0095/C0067/C0032/C0085/C0078/C0076/C0069/C0083/C0083/C0032/C0079/C0084/C0072/C0069/C0082/C0087/C0073/C0083/C0069/C0032/C0078/C0079/C0084/C0069/C0068/C0041 Limits J105 J106 J107 Parameter Symbol Test Conditions Typa Min Max Min Max Min Max Unit Static Gate-Source Breakdown Voltage V(BR)GSS IG = –1 /C0109A , VDS = 0 V –35 –25 –25 –25 V Gate-Source Cutoff Voltage VGS(off) VDS = 5 V, ID = 1 /C0109A –4.5 –10 –2 –6 –0.5 –4.5 V Saturation Drain Currentb IDSS VDS = 15 V, VGS = 0 V 500 200 100 mA VGS = –15 V, VDS = 0 V –0.02 –3 –3 –3 Gate Reverse Current IGSS TA = 125/C0095C –10 Gate Operating Currentb IG VDG = 10 V, ID = 25 mA –0.01 nA VDS = 5 V, VGS = –10 V 0.01 3 3 3 Drain Cutoff Current ID(off) TA = 125/C0095C 5 Drain-Source On-Resistance rDS(on) VGS = 0 V, ID = 1 mA 3 6 8 /C0087 Gate-Source Forward Voltage VGS(F) IG = 1 mA , VDS = 0 V 0.7 V Dynamic Common-Source Forward Transconductanceb gfs VDS = 10 V, ID = 25 mA Common-Source Output Conductance b gos VDS = 10 V, ID = 25 mA f = 1 kHz mS Drain-Source On-Resistance rds(on) VGS = 0 V, ID = 0 mA f = 1 kHz 3 6 8 /C0087 Common-Source Input Capacitance C iss VDS = 0 V, VGS = 0 V f = 1 MHz 120 160 160 160 Common-Source Reverse Transfer Capacitance C rss VDS = 0 V, VGS = –10 V f = 1 MHz 20 35 35 35 pF Equivalent Input Noise Voltage en VDG = 10 V, ID = 25 mA f = 1 kHz 3 nV⁄ √Hz Switching td(on) 6 Turn-On Time tr VDD = 1.5 V, VGS(H) = 0 V 8 td(off) VDD = 1.5 V, VGS(H) = 0 V See Switching Diagram 5 ns Turn-Off Time tf 9 Notes a. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. NVA b. Pulse test: PW /C0118300 /C0109s duty cycle /C01183%.

Document Number: 70230 S-04028— Rev. D, 04-Jun-01 www.vishay.com 7-3 /C0084/C0089/C0080/C0073/C0067/C0065/C0076/C0032/C0067/C0072/C0065/C0082/C0065/C0067/C0084/C0069/C0082/C0073/C0083/C0084/C0073/C0067/C0083/C0032/C0040/C0084/C0065/C0032/C0061/C0032/C0050/C0053/C0095/C0067/C0032/C0085/C0078/C0076/C0069/C0083/C0083/C0032/C0079/C0084/C0072/C0069/C0082/C0087/C0073/C0083/C0069/C0032/C0078/C0079/C0084/C0069/C0068/C0041 0 –6 –8 –10–2 10 100 1000 2 .0 1.6 –55 25 125 –15 85 500 6821 0 400 200 100 0 –8–4–2 –10 03 0 4 010 50 On-Resistance and Drain Current vs. Gate-Source Cutoff Voltage On-Resistance vs. Drain Current Turn-On Switching Turn-Off Switching On-Resistance vs. Temperature Output Characteristics VGS(off) – Gate-Source Cutoff Voltage (V) I D – Drain Current (mA) TA – Temperature (/C0095C) VDS – Drain-Source Voltage (V) VGS(off) – Gate-Source Cutoff Voltage (V) I D – Drain Current (mA) rDS @ ID = 10 mA, VGS = 0 V IDSS @ VDS = 10 V, VGS = 0 V IDSSrDS TA = 25/C0095C VGS(off) = –3 V –5 V –8 V ID = 10 mA rDS changes /C0088 0.7%//C0095C tr approximately independent of ID VDD = 1.5 V, RG = 50 /C0087 VGS(L) = –10 V td(on) @ ID = 10 mA td(off) VGS(off) = –8 V VGS(off) = –3 V td(off) independent of device VGS(off) VDD = 1.5 V, VGS(L) = –10 V 6 1.2 0.8 0.4 –35 5 45 65 105 300 VGS(off) = –5 V tr VGS(off) = –3 V –5 V –8 V td(on) @ ID = 30 mA VGS = 0 V –1.0 V –0.5 V –1.5 V –2.0 V –2.5 V –3.0 V tf Switching Time (ns) Switching Time (ns) ID – Drain Current (mA) rDS(on) – Drain-Source On-Resistance ( Ω ) rDS(on) – Drain-Source On-Resistance ( Ω )rDS(on) – Drain-Source On-Resistance ( Ω ) IDSS – Saturation Drain Current (mA)

www.vishay.com 7-4 Document Number: 70230 S-04028— Rev. D, 04-Jun-01 /C0084/C0089/C0080/C0073/C0067/C0065/C0076/C0032/C0067/C0072/C0065/C0082/C0065/C0067/C0084/C0069/C0082/C0073/C0083/C0084/C0073/C0067/C0083/C0032/C0040/C0084/C0065/C0032/C0061/C0032/C0050/C0053/C0095/C0067/C0032/C0085/C0078/C0076/C0069/C0083/C0083/C0032/C0079/C0084/C0072/C0069/C0082/C0087/C0073/C0083/C0069/C0032/C0078/C0079/C0084/C0069/C0068/C0041 200 100 1 10 100 0.1 1 10 100 10 100 1 k 100 k 10 k 300 0 –6 260 180 140 100 –8 –10–4–2 01 2 1 6 842 0 100 150 120 Capacitance vs. Gate-Source Voltage Transconductance vs. Drain Current Forward Transconductance and Output Conductance vs. Gate-Source Cutoff Voltage Gate Leakage Current Output Conductance vs. Drain Current Noise Voltage vs. Frequency VGS – Gate-Source Voltage (V) I D – Drain Current (mA) ID – Drain Current (mA) f – Frequency (Hz) VGS(off) – Gate-Source Cutoff Voltage (V) V DG – Drain-Gate Voltage (V) VDS = 0 V f = 1 MHz C iss C rss VDG = 10 V ID = 10 mA gfs and gos @ VDS = 10 V VGS = 0 V, f = 1 kHz gfs gos IGSS @ 125/C0095C IGSS @ 25/C0095C TA = 125/C0095C TA = 25/C0095C 100 mA 100 mA 25 mA 1 pA 100 pA 10 pA 100 nA 1 nA 10 nA VDS = 10 V f = 1 kHz TA = –55/C0095C 125/C0095C TA = –55/C0095C 125/C0095C 220 18 25 mA 25/C0095C VGS(off) = –5 V VDS = 10 V f = 1 kHz VGS(off) = –5 V 25/C0095C nVen ⁄ Hz√ )(– Noise Voltage C (pF) gos – Output Conductance (mS)gos – Output Conductance (mS) IG – Gate Leakage gfs – Forward Transconductance (mS) gos – Output Conductance (mS)gfs – Forward Transconductance (mS)

Document Number: 70230 S-04028— Rev. D, 04-Jun-01 www.vishay.com 7-5 /C0083/C0087/C0073/C0084/C0067/C0072/C0073/C0078/C0071/C0032/C0084/C0073/C0077/C0069/C0032/C0084/C0069/C0083/C0084/C0032/C0067/C0073/C0082/C0067/C0085/C0073/C0084 J105 J106 J107 VGS(L) –12V –7V –5V R L* /C0053/C0048 /C0087 /C0053/C0048 /C0087 /C0053/C0048 /C0087 ID(on) 28 mA 27 mA 26 mA *Non-inductive Input Pulse Sampling Scope Rise Time < 1 ns Fall Time < 1 ns Pulse Width 100 ns PRF 1 MHz Rise Time 0.4 ns Input Resistance 10 M/C0087 Input Capacitance 1.5 pF 51 /C0087 51 /C0087 1 k/C0087 VIN Scope VDD R L OUT VGS(H) VGS(L)

Document Number: 91000 www.vishay.com Revision: 18-Jul-08 1 Disclaimer Legal Disclaimer Notice Vishay All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all li ability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permit ted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.