ILD205T VISHAY

Document overview

  • PDF pages: 7

Technical content

Page 1

Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 package

Features

  • Two Channel Coupler
  • SOIC-8A Surface Mountable Package
  • Standard Lead Spacing of .05 "
  • Available only on Tape and Reel Option (Con- forms to EIA Standard 481-2)
  • Isolation Test Voltage, 3000 VRMS
  • Compatible with Dual Wave, Vapor Phase and IR Reflow Soldering
  • Lead-free component
  • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC

Agency Approvals

  • UL1577, File No. E52744 System Code Y

Description

The ILD205T/ 206T/ 207T/ 211T/ 213T/ 217T are optically coupled pairs with a Gallium Arsenide infrared LED and a silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the device while maintaining a high degree of electrical isolation between input and output. The ILD205T/ 206T/ 207T/ 211T/ 213T/ 217T come in a standard SOIC-8A small outline package for surface mounting which makes it ideally suited for high density applications with limited space. In addition to eliminating through-holes requirements, this package conforms to standards for surface mounted devices.

Document Number 83647 Rev. 1.4, 26-Oct-04

PDF page 1 diagram

A specified minimum and maximum CTR allows a narrow tolerance in the electrical design of the adjacent circuits. The high BVCEO of 70 V gives a higher safety margin compared to the industry standard of 30 V.

Order Information

Part Remarks
ILD205T CTR 40 - 80 %, SOIC-8
ILD206T CTR 63 - 125 %, SOIC-8
ILD207T CTR 100 - 200 %, SOIC-8
ILD211T CTR > 20 %, SOIC-8
ILD213T CTR > 100 %, SOIC-8
ILD217T CTR > 100 %, SOIC-8

For additional information on the available options refer to Option Information.

www.vishay.com

Page 2

Absolute Maximum Ratings

Tamb = 25 °C, unless otherwise specified Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Rating for extended periods of the time can adversely affect reliability.

Input

Parameter Test condition Symbol Value Unit
Peak reverse voltage V R 6.0 V
Peak pulsed current 1.0 µs, 300 pps 1.0 A
Continuous forward current per channel 30 mA
Power dissipation P diss 50 mW
Derate linearly from 25 °C 0.66 mW/°C

Output

Parameter Test condition Symbol Value Unit
Collector-emitter breakdown voltage BV CEO 70 V
Emitter-collector breakdown voltage BV ECO 7.0 V
Power dissipation per channel P diss 125 mW
Derate linearly from 25 °C 1.67 mW/°C

Coupler

Parameter Test condition Symbol Value Unit
Total package dissipation ambient (2 LEDs + 2 detectors, 2 channels) P tot 300 mW
Derate linearly from 25 °C 4.0 mW/°C
Storage temperature T stg - 55 to + 150 °C
Operating temperature T amb - 55 to + 100 °C
Soldering time from 260 °C T sld 10 sec.

Electrical Characteristics

Tamb = 25 °C, unless otherwise specified Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements.

Input

Parameter Test condition Symbol Min Typ. Max Unit
Forward voltage I = 10 mA F V F 1.2 1.55 V
Reverse current V = 6.0 V R I R 0.1 100 µA
Capacitance V = 0 R C O 25 pF

www.vishay.com

Document Number 83647 Rev. 1.4, 26-Oct-04

Page 3

Output

Parameter Test condition Symbol Min Typ. Max Unit
Collector-emitter breakdown voltage I = 10 µA C BV CEO 70 V
Emitter-collector breakdown voltage I = 10 µA E BV ECO 7.0 V
Collector-emitter leakage current V = 10 V, I = 0 CE F I CEO 5.0 50 nA
Collector-emitter capacitance V = 0 CE C CE 10 pF

Coupler

Parameter Test condition Symbol Min Typ. Max Unit
Collector-emitter saturation voltage I = 10 mA, I = 2.5 mA F C V CE(sat) 0.4 V
Capacitance (input-output) C IO 0.5 pF
Isolation test voltage t = 1.0 sec. V ISO 3000 V RMS
Resistance, input to output R IO 100 GΩ

Current Transfer Ratio

Parameter Test condition Part Symbol Min Typ. Max Unit
DC Current Transfer Ratio V = 5.0 V, I = 10 mA CE F ILD205T CTR DC 40 80 %
ILD206T CTR DC 63 125 %
ILD207T CTR DC 100 200 %
ILD211T CTR DC 20 %
ILD213T CTR DC 100 %
V = 5.0 V, I = 1.0 mA CE F ILD205T CTR DC 13 30 %
ILD206T CTR DC 22 45 %
ILD207T CTR DC 34 70 %
ILD217T CTR DC 100 120 %

Document Number 83647

www.vishay.com

Rev. 1.4, 26-Oct-04

Page 4

Switching Characteristics

Parameter Test condition Symbol Min Typ. Max Unit
Turn-on time I = 2.0 mA, R = 100 Ω, C L V = 5.0 V CC t on 5.0 µs
Turn-off time I = 2.0 mA, R = 100 Ω, C L V = 5.0 V CC t off 4.0 µs

Typical Characteristics (Tamb = 25 °C unless otherwise specified)

PDF page 4 diagram

Figure 1. Forward Current vs. Forward Voltage

PDF page 4 diagram

0 2 4 6 8 10 12

VCE-Collector to Emitter Voltage (V) iild205t_02

Figure 2. Collector-Emitter Current vs. Temperature

www.vishay.com

PDF page 4 diagram

.01 .1 1 10 100

IF - LED Current - (mA)

iild205t_03

Figure 3. Normalized CTRce vs. Forward Current

PDF page 4 diagram

20 40 60 80 100

TA - Temperature (°C)

iild205t_04

Figure 4. Current Transfer Ratio (normalized) vs. Ambient

Temperature

Document Number 83647 Rev. 1.4, 26-Oct-04

Page 5

PDF page 5 diagram

.1 1 10 100

Rl - Load Resistor (KΩ) ˇ

iild205t_01

Figure 5. Switching Speed vs. Load Resistor

PDF page 5 diagram

Figure 6. Collector Current vs. Ambient Temperature

PDF page 5 diagram

25 50 75 100 125

TA - Ambient Temperature (°C)

iild205t_07

Figure 7. Power Dissipation vs. Ambient Temperature

PDF page 5 diagram
PDF page 5 diagram

Output

Figure 8. Switching Test Circuit

Document Number 83647

www.vishay.com

Rev. 1.4, 26-Oct-04

Page 6

Package Dimensions in Inches (mm)

PDF page 6 diagram

www.vishay.com

Document Number 83647 Rev. 1.4, 26-Oct-04

Page 7

Ozone Depleting Substances Policy Statement

It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an

earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances.

We reserve the right to make changes to improve technical design

and may do so without further notice.

Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use.

Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423

Document Number 83647

www.vishay.com

Rev. 1.4, 26-Oct-04