IL300_05 VISHAY

Document overview

  • PDF pages: 15

Technical content

Page 1

Linear Optocoupler, High Gain Stability, Wide Bandwidth

Features

  • Couples AC and DC signals
  • 0.01 % Servo Linearity
  • Wide Bandwidth, > 200 kHz
  • High Gain Stability, ± 0.05 %/ °C
  • Low Input-Output Capacitance
  • Low Power Consumption, < 15 mW
  • Isolation Test Voltage, 5300 VRMS, 1.0 sec.
  • Internal Insulation Distance, > 0.4 mm for VDE
  • Component in accordance to RoHS 2002/95/EC

and WEEE 2002/96/EC

Agency Approvals

  • UL File #E52744
  • DIN EN 60747-5-2 (VDE0884)

DIN EN 60747-5-5 pending Available with Option 1, Add -X001 Suffix

Applications

Power Supply Feedback Voltage/Current Medical Sensor Isolation Audio Signal Interfacing Isolated Process Control Transducers Digital Telephone Isolation

Description

The IL300 Linear Optocoupler consists of an AlGaAs IRLED irradiating an isolated feedback and an output PIN photodiode in a bifurcated arrangement. The feedback photodiode captures a percentage of the

LED’s flux and generates a control signal (IP1) that

can be used to servo the LED drive current. This tech- nique compensates for the LED’s non-linear, time, and temperature characteristics. The output PIN pho- todiode produces an output signal (IP2) that is linearly

related to the servo optical flux created by the LED. The time and temperature stability of the input-output coupler gain (K3) is insured by using matched PIN photodiodes that accurately track the output flux of

the LED.

Document Number 83622 Rev. 1.5, 24-Mar-05

PDF page 1 diagram

Order Information

Part Remarks
IL300 K3 = 0.557 - 1.618, DIP-8
IL300-DEFG K3 = 0.765 - 1.181, DIP-8
IL300-EF K3 = 0.851 - 1.061, DIP-8
IL300-E K3 = 0.851 - 0.955, DIP-8
IL300-F K3 = 0.945 - 1.061, DIP-8
IL300-X006 K3 = 0.557 - 1.618, DIP-8 400mil (option 6)
IL300-X007 K3 = 0.557 - 1.618, SMD-8 (option 7)
IL300-X009 K3 = 0.557 - 1.618, SMD-8 (option 9)
IL300-DEFG-X006 K3 = 0.765 - 1.181, DIP-8 400 mil (option 6)
IL300-DEFG-X007 K3 = 0.765 - 1.181, SMD-8 (option 7)
IL300-DEFG-X009 K3 = 0.765 - 1.181, SMD-8 (option 9)
IL300-EF-X006 K3 = 0.851 - 1.061, DIP-8 400 mil (option 6)
IL300-EF-X007 K3 = 0.851 - 1.061, SMD-8 (option 7)
IL300-EF-X009 K3 = 0.851 - 1.061, SMD-8 (option 9)
IL300-E-X006 K3 = 0.851 - 0.955, DIP-8 400 mil (option 6)
IL300-E-X007 K3 = 0.851 - 0.955, SMD-8 (option 7)
IL300-E-X009 K3 = 0.851 - 0.955, SMD-8 (option 9)
IL300-F-X006 K3 = 0.945 - 1.061, DIP-8 400 mil (option 6)
IL300-F-X007 K3 = 0.945 - 1.061, SMD-8 (option 7)
IL300-F-X009 K3 = 0.945 - 1.061, SMD-8 (option 9)

For additional information on the available options refer to Option Information.

www.vishay.com

Page 2

∆K3-Transfer Gain Linearity

Operation Description

A typical application circuit (Figure 1) uses an opera- The percent deviation of the Transfer Gain, as a functional amplifier at the circuit input to drive the LED. tion of LED or temperature from a specific Transfer The feedback photodiode sources current to R1 con- Gain at a fixed nected to the inverting input of U1. The photocurrent, LED current and temperature. IP1, will be of a magnitude to satisfy the relationship of (IP1 = VIN/R1). The magnitude of this current is directly proportional to the feedback transfer gain (K1) times the LED drive

Photodiode

A silicon diode operating as a current source. The output current is proportional to the incident optical flux

current ( VIN/R1 = K1 • IF). The op-amp will supply supplied by the LED emitter. The diode is operated in LED current to force sufficient photocurrent to keep

the photovoltaic or photoconductive mode. In the pho-

the node voltage (Vb) equal to Va.

tovoltaic mode the diode functions as a current

The output photodiode is connected to a non-invert- source in parallel with a forward biased silicon diode. ing voltage follower amplifier. The photodiode load resistor, R2, performs the current to voltage conversion. The output amplifier voltage is the product of the output forward gain (K2) times the LED current and photodiode load, R2 ( VO = IF • K2 • R2).

The magnitude of the output current and voltage is dependent upon the load resistor and the incident LED optical flux. When operated in the photoconductive mode the diode is connected to a bias supply which reverse biases the silicon diode. The magni-

Therefore, the overall transfer gain (VO/VIN) becomes tude of the output current is directly proportional to the the ratio of the product of the output forward gain (K2) LED incident optical flux. times the photodiode load resistor (R2) to the product of the feedback transfer gain (K1) times the input resistor (R1). This reduces to VO/VIN=(K2 • R2)/(K1 • R1). The overall transfer gain is completely independent of the LED forward current. The IL300 transfer gain (K3) is expressed as the ratio of the output gain (K2) to the feedback gain (K1). This shows that the circuit gain becomes the product of the IL300 transfer gain times the ratio of the output to input resistors

VO/VIN = K3 (R2/R1).

K1-Servo Gain

The ratio of the input photodiode current (IP1) to the LED current (IF) i.e., K1 = IP1/IF.

K2-Forward Gain

The ratio of the output photodiode current (IP2) to the LED current (IF), i.e., K2 = IP2/IF.

K3-Transfer Gain

The Transfer Gain is the ratio of the Forward Gain to the Servo gain, i.e., K3 = K2/K1.

www.vishay.com

LED (Light Emitting Diode)

An infrared emitter constructed of AlGaAs that emits at 890 nm operates efficiently with drive current from 500 µA to 40 mA. Best linearity can be obtained at drive currents between 5.0 mA to 20 mA. Its output flux typically changes by - 0.5 % /°C over the above operational current range.

Application Circuit

PDF page 2 diagram

Figure 1. Typical Application Circuit

Document Number 83622 Rev. 1.5, 24-Mar-05

Page 3

Absolute Maximum Ratings

Tamb = 25 °C, unless otherwise specified Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Rating for extended periods of the time can adversely affect reliability.

Input

Parameter Test condition Symbol Value Unit
Power dissipation P diss 160 mW
Derate linearly from 25 °C 2.13 mW/°C
Forward current I F 60 mA
Surge current (pulse width < 10 µs) I PK 250 mA
Reverse voltage V R 5.0 V
Thermal resistance R th 470 K/W
Junction temperature T j 100 °C

Output

Parameter Test condition Symbol Value Unit
Power dissipation P diss 50 mA
Derate linearly from 25 °C 0.65 mW/°C
Reverse voltage V R 50 V
Junction temperature T j 100 °C
Thermal resistance R th 1500 K/W

Coupler

Parameter Test condition Symbol Value Unit
Total package dissipation at 25 °C P tot 210 mW
Derate linearly from 25 °C 2.8 mW/°C
Storage temperature T stg - 55 to + 150 °C
Operating temperature T amb - 55 to + 100 °C
Isolation test voltage > 5300 V RMS
Isolation resistance V = 500 V, T = 25 °C IO amb R IO > 1012 Ω
V = 500 V, T = 100 °C IO amb R IO > 1011 Ω

Document Number 83622

www.vishay.com

Rev. 1.5, 24-Mar-05

Page 4

Electrical Characteristics

Tamb = 25 °C, unless otherwise specified Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements.

Input

LED Emitter

Parameter Test condition Symbol Min Typ. Max Unit
Forward voltage I = 10 mA F V F 1.25 1.50 V
V Temperature coefficient F ∆V /∆°C F - 2.2 mV/°C
Reverse current V = 5 V R I R 1.0 µA
Junction capacitance V = 0 V, f = 1.0 MHz F C j 15 pF
Dynamic resistance I = 10 mA F ∆V /∆I F F 6.0 Ω

Output

Parameter Test condition Symbol Min Typ. Max Unit
Dark current V = -15 V, I = 0 µs det F I D 1.0 25 nA
Open circuit voltage I = 10 mA F V D 500 mV
Short circuit current I = 10 mA F I SC 70 µA
Junction capacitance V = 0, f = 1.0 MHz F C j 12 pF
Noise equivalent power V = 15 V det NEP 4 x 1014 W/√Hz

www.vishay.com

Document Number 83622 Rev. 1.5, 24-Mar-05

Page 5

Coupler

Parameter Test condition Symbol Min Typ. Max Unit
Input- output capacitance V = 0 V, f = 1.0 MHz F 1.0 pF
K1, Servo gain (I /I ) P1 F I = 10 mA, V = - 15 V F det K1 0.0050 0.007 0.011
Servo current, see Note 1,2 I = 10 mA, V = - 15 V F det I P1 70 µA
K2, Forward gain (I /I ) P2 F I = 10 mA, V = - 15 V F det K2 0.0036 0.007 0.011
Forward current I = 10 mA, V = - 15 V F det I P2 70 µA
K3, Transfer gain (K2/K1) see Note 1,2 I = 10 mA, V = - 15 V F det K3 0.56 1.00 1.65 K2/K1
Transfer gain linearity I = 1.0 to 10 mA F ∆K3 ± 0.25 %
I = 1.0 to 10 mA, F T = 0 °C to 75 °C amb ± 0.5 %
Photoconductive Operation
Frequency response I = 10 mA, MOD = ± 4.0 mA, Fq R = 50 Ω L BW (-3 db) 200 KHz
Phase response at 200 kHz V = - 15 V det -45 Deg.
  1. Bin Sorting:

K3 (transfer gain) is sorted into bins that are ± 6 % , as follows:

Bin A = 0.557 - 0.626

Bin B = 0.620 - 0.696

Bin C = 0.690 - 0.773

Bin D = 0.765 - 0.859

Bin E = 0.851 - 0.955

Bin F = 0.945 - 1.061

Bin G = 1.051 - 1.181

Bin H = 1.169 - 1.311

Bin I = 1.297 - 1.456

Bin J = 1.442 - 1.618

K3 = K2/K1. K3 is tested at IF = 10 mA, Vdet = - 15 V. 2. Bin Categories: All IL300s are sorted into a K3 bin, indicated by an alpha character that is marked on the part. The bins range from "A" through "J".

The IL300 is shipped in tubes of 50 each. Each tube contains only one category of K3. The category of the parts in the tube is marked on the tube label as well as on each individual part.

  1. Category Options: Standard IL300 orders will be shipped from the categories that are available at the time of the order. Any of the ten categories may be shipped. For customers requiring a narrower selection of bins, four different bin option parts are offered.

IL300-DEFG: Order this part number to receive categories D,E,F,G only.

IL300-EF: Order this part number to receive categories E, F only.

IL300-E: Order this part number to receive category E only.

Switching Characteristics

Parameter Test condition Symbol Min Typ. Max Unit
Switching time ∆I = 2.0 mA, I = 10 mA F Fq t r 1.0 µs
t f 1.0 µs
Rise time t r 1.75 µs
Fall time t f 1.75 µs

Document Number 83622

www.vishay.com

Rev. 1.5, 24-Mar-05

Page 6

Common Mode Transient Immunity

Parameter Test condition Symbol Min Typ. Max Unit
Common mode capacitance V = 0, f = 1. MHz F C CM 0.5 pF
Common mode rejection ratio f = 60 Hz, R = 2.2 KΩ L CMRR 130 dB

Typical Characteristics (Tamb = 25 °C unless otherwise specified)

PDF page 6 diagram

iil300_02

Figure 2. LED Forward Current vs.Forward Voltage

PDF page 6 diagram

VF - LED Forward Voltage - V

iil300_03

Figure 3. LED Forward Current vs.Forward Voltage

www.vishay.com

PDF page 6 diagram

.1 1 10 100

IF - LED Current - mA

iil300_04

Figure 4. Servo Photocurrent vs. LED Current and Temperature

PDF page 6 diagram

.1 1 10 100

IF - LED Current - mA

iil300_05

Figure 5. Servo Photocurrent vs. LED Current and Temperature

Document Number 83622 Rev. 1.5, 24-Mar-05

Page 7

PDF page 7 diagram

0 5 10 15 20 25

IF - LED Current - mA

iil300_06

Figure 6. Normalized Servo Photocurrent vs. LED Current and

Temperature

PDF page 7 diagram

IF - LED Current - mA

iil300_07

Figure 7. Normalized Servo Photocurrent vs. LED Current and

Temperature

PDF page 7 diagram

.1 1 10 100

IF - LED Current - mA

iil300_08

Figure 8. Servo Gain vs. LED Current and Temperature

Document Number 83622 Rev. 1.5, 24-Mar-05

PDF page 7 diagram

.1 1 10 100

IF - LED Current - mA

iil300_09

Figure 9. Normalized Servo Gain vs. LED Current and

Temperature

PDF page 7 diagram

0 5 10 15 20 25

IF - LED Current - mA

iil300_10

Figure 10. Transfer Gain vs. LED Current and Temperature

PDF page 7 diagram

0 5 10 15 20 25

IF - LED Current - mA

iil300_11

Figure 11. Normalized Transfer Gain vs. LED Current and

Temperature

www.vishay.com

Page 8

PDF page 8 diagram

104

105

106

F - Frequency - Hz

iil300_12

Figure 12. Amplitude Response vs. Frequency

PDF page 8 diagram

103 104 105 106 107

F - Frequency - Hz

iil300_13

Figure 13. Amplitude and Phase Response vs. Frequency

PDF page 8 diagram

F - Frequency - Hz

iil300_14

Figure 14. Common-Mode Rejection

www.vishay.com

PDF page 8 diagram

Voltage - Vdet

iil300_15

Figure 15. Photodiode Junction Capacitance vs. Reverse Voltage

Application Considerations

In applications such as monitoring the output voltage from a line powered switch mode power supply, measuring bioelectric signals, interfacing to industrial transducers, or making floating current measurements, a galvanically isolated, DC coupled interface is often essential. The IL300 can be used to construct an amplifier that will meet these needs. The IL300 eliminates the problems of gain nonlinearity and drift induced by time and temperature, by monitoring LED output flux. A PIN photodiode on the input side is optically coupled to the LED and produces a current directly proportional to flux falling on it. This photocurrent, when coupled to an amplifier, provides the servo signal that

controls the LED drive current. The LED flux is also coupled to an output PIN photodiode. The output photodiode current can be directly or amplified to satisfy the needs of succeeding circuits.

Isolated Feedback Amplifier

The IL300 was designed to be the central element of DC coupled isolation amplifiers. Designing the IL300 into an amplifier that provides a feedback control signal for a line powered switch mode power is quite simple, as the following example will illustrate. See Figure 17 for the basic structure of the switch mode supply using the Infineon TDA4918 Push-Pull Switched Power Supply Control Chip. Line isolation and insulation is provided by the high frequency transformer. The voltage monitor isolation will be provided by the IL300.

Document Number 83622 Rev. 1.5, 24-Mar-05

Page 9

PDF page 9 diagram

Page 10

PDF page 10 diagram

1 1 0 / 220 MAIN

PDF page 10 diagram

iil300_17

Figure 17. Switching Mode Power Supply

PDF page 10 diagram

Vmonitor

To control input

iil300_18

Figure 18. DC Coupled Power Supply Feedback Amplifier

Table 1. gives the value of R5 given the production K3 bins.

R5 Selection

Table 1.

Bins Min. Max. 3 Typ. R5 Resistor KΩ 1% KΩ
A 0.560 0.623 0.59 50.85 51.1
B 0.623 0.693 0.66 45.45 45.3
C 0.693 0.769 0.73 41.1 41.2
D 0.769 0.855 0.81 37.04 37.4
E 0.855 0.950 0.93 32.26 32.4
F 0.950 1.056 1.00 30.00 30.0
G 1.056 1.175 1.11 27.03 27.0
H 1.175 1.304 1.24 24.19 24.0
I 1.304 1.449 1.37 21.90 22.0
J 1.449 1.610 1.53 19.61 19.4

www.vishay.com

Document Number 83622 Rev. 1.5, 24-Mar-05

Page 11

The last step in the design is selecting the LED current limiting resistor (R4). The output of the operational amplifier is targeted to be 50 % of the VCC, or 2.5 V. With an LED quiescent current of 12 mA the typical LED (VF) is 1.3 V. Given this and the operational output voltage, R4 can be calculated.

Vopamp - VF = 2.5 V - 1.3 V = 100Ω

R4 = IFq

12 mA

17096

The circuit was constructed with an LM201 differential operational amplifier using the resistors selected. The amplifier was compensated with a 100 pF capacitor connected between pins 1 and 8. The DC transfer characteristics are shown in Figure 19. The amplifier was designed to have a gain of 0.6 and was measured to be 0.6036. Greater accuracy can be achieved by adding a balancing circuit, and potentiometer in the input divider, or at R5. The circuit shows exceptionally good gain linearity with an RMS error of only 0.0133 % over the input voltage range of 4.0 V - 6.0 V in a servo mode; see Figure 20.

PDF page 11 diagram

iil300_19

Figure 19. Transfer Gain

PDF page 11 diagram

Figure 20. Linearity Error vs. Input Voltage

The AC characteristics are also quite impressive offering a - 3.0 dB bandwidth of 100 kHz, with a -45 ° phase shift at 80 kHz as shown in Figure 21.

PDF page 11 diagram

103 104 105 106

F - Frequency - Hz

iil300_21

Figure 21. Amplitude and Phase Power Supply Control

The same procedure can be used to design isolation amplifiers that accept bipolar signals referenced to ground. These amplifiers circuit configurations are

PDF page 11 diagram

Page 12

Non-Inverting Input –Vcc Vin 3+ 7 Vcc 1 IL 100 Ω 6 R1 R2 2 2 – –Vcc +Vcc 3 4 20pF 4 R3 –Vref1 Non-Inverting Output +Vref2 R5 300 8 R6 7 2 – 7 Vcc Vcc 6 6 Vo 3+ 4–Vcc 5 R4
Inverting Input Vin 7 3+ Vcc 100 Ω R1 6 1 IL R2 2 Vcc +Vcc – 2 4 20pF 3 R3 4 –Vcc +Vref1 iil300_22 Inverting Output +Vref2 300 8 3+ 7 7 Vcc Vcc 6 6 Vout 5 2 – –Vcc 4 R4

Figure 22. Non-inverting and Inverting Amplifiers

Table 2. Optolinear amplifiers

Amplifier Input Output Gain Offset
Non-Inverting Inverting Inverting VOUT K3 R4 R2 = VIN R3 (R1 + R2) Vref1 R4 K3 Vref2 = R3
Non-Inverting Non-Inverting VOUT K3 R4 R2 (R5 + R6) = VIN R3 R5 (R1 + R2) - Vref1R4 (R5 + R6) K3 Vref2 = R3 R6
nverting Inverting Non-Inverting VOUT - K3 R4 R2 (R5 + R6) = VIN R3 R5 (R1 + R2) Vref1R4 (R5 + R6) K3 Vref2 = R3 R6
Non-Inverting Inverting VOUT - K3 R4 R2 = VIN R3 (R1 + R2) - Vref1 R4 K3 Vref2 = R3

17189

These amplifiers provide either an inverting or non- age output for a zero voltage input. The non-inverting inverting transfer gain based upon the type of input input amplifier requires the use of a bipolar supply,

and output amplifier. Table 2 shows the various con- while the inverting input stage can be implemented figurations along with the specific transfer gain equa- with single supply operational amplifiers that permit

tions. The offset column refers to the calculation of the operation close to ground. output offset or Vref2 necessary to provide a zero volt-

www.vishay.com

Document Number 83622 Rev. 1.5, 24-Mar-05

Page 13

For best results, place a buffer transistor between the LED and output of the operational amplifier when a CMOS opamp is used or the LED IFq drive is targeted

to operate beyond 15 mA. Finally the bandwidth is

Package Dimensions in Inches (mm)

influenced by the magnitude of the closed loop gain of the input and output amplifiers. Best bandwidths result when the amplifier gain is designed for unity.

PDF page 13 diagram
PDF page 13 diagram

Document Number 83622

www.vishay.com

Rev. 1.5, 24-Mar-05

Page 14

Ozone Depleting Substances Policy Statement

It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an

earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances.

We reserve the right to make changes to improve technical design

and may do so without further notice.

Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use.

Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany

www.vishay.com

Document Number 83622 Rev. 1.5, 24-Mar-05

Page 15

Legal Disclaimer Notice

Vishay

Disclaimer

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 91000

www.vishay.com

Revision: 18-Jul-08