HR22 HIROSE

Document overview

  • PDF pages: 8

Technical content

Page 1

PDF page 1 diagram
Ratings Rated current 2A Operating temperature range -25ç to +85℃
Rated voltage 100V AC, 140V DC Storage temperature range -10ç to +60℃
PDF page 1 diagram
Item Specifi cations Conditions
1. Contact resistance 20mø max. Measured at DC 1A
2. Insulation resistance 1,000Mø min. Measured at DC 100V
3. Withstanding voltage No fl ashover or dielectric breakdown. Measured at AC 300V for 1 minute
4. Vibration resistance There shall be no electrical No electrical discontinuity for 10µs or greater. 10 to 500Hz/cycle, amplitude : 0.75mm, acceleration- 98m/s2 3 axis directions, 2 hours each
5. Shock resistance No electrical discontinuity for 10µs or greater. Acceleration : 490m/s2, duration : 11ms, 3 axis directions, 3 times each
6. Mating cycles Contact resistance : 20mø max. 100 times
7. Resistance to water pressure No water penetration into the connector. Mated connectors left in Water at a depth of 1.8m for 48 hours.

Materials / Finish

Items Material Finish Remarks
Plated shell Brass Nickel plating ――――
Zinc alloy
Insulator PBT resin Black UL94V-0
Male contact Brass (Soldering) Silver plating ――――
Phosphor bronze (Crimping) ――――
Female contact Beryllium copper (Soldering) ――――
Phosphor bronze (Crimping) ――――
Hood and bushing Acrylonitrile-butadiene rubber Black

In cases where the application will demand a high level of reliability, such as automotive,

2018.7③

please contact a company representative for further information.

Page 2

Product Number Structure

Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders.

HR22 - 12 W T P A - 20 SC (\*\*)

1 2 3 4 5 6

7 8

9

PDF page 2 diagram

Page 3

Plug

Waterproof type

PDF page 3 diagram
PDF page 3 diagram

(Representative example)

Part No. HRS No. RoHS
HR22-12WTPA-20SC(73) 122-0004-7 73 Yes
HR22-12WTPA-20PC(73) 122-0024-4 73

Crimp type

Part No. HRS No. RoHS
HR22-12WTPA-20S(73) 122-0015-3 73 Yes
HR22-12WTPA-20P(73) 122-0027-2 73

Solder type

Cable clamping force, rotation force, waterproof performance, and other types of performance may differ depending on the cable type used. Please make sure to verify the suitability of the cable assembly before use or production.

Non-waterproof type

PDF page 3 diagram
PDF page 3 diagram

(Representative example)

Part No. HRS No. RoHS
HR22-12TPD-20SC(73) 122-0010-0 73 Yes
HR22-12TPD-20PC(73) 122-0018-1 73

Crimp type

Part No. HRS No. RoHS
HR22-12TPD-20S(73) 122-0011-2 73 Yes
HR22-12TPD-20P(73) 122-0012-5 73

Solder type

Cable clamping force, rotation force, waterproof performance, and other types of performance may differ depending on the cable type used. Please make sure to verify the suitability of the cable assembly before use or production.

Page 4

Right angle plug

Waterproof type

PDF page 4 diagram

M16×0.75

PDF page 4 diagram

(Representative example)

Part No. HRS No. RoHS
HR22-12WTLP-20PC(31) 122-0064-9 31 Yes

Crimp type

Part No. HRS No. RoHS
HR22-12WTLP-20P(31) 122-0054-5 31 Yes

Solder type

PDF page 4 diagram

M16×0.75

PDF page 4 diagram

(Representative example)

PDF page 4 diagram
Part No. HRS No. A RoHS
JR13WCC-4(72) 114-2045-0 72 4 Yes
JR13WCC-5(72) 114-2046-3 72 5
JR13WCC-6(72) 114-2047-6 72 6
Part No. HRS No. A RoHS
JR13WCC-7(72) 114-2048-9 72 7 Yes
JR13WCC-8(72) 114-2049-1 72 8
JR13WCC-9(72) 114-2050-0 72 9
JR13WCC-10(72) 114-2051-3 72 10

Cable clamping force, rotation force, waterproof performance, and other types of performance may differ depending on the cable type used. Please make sure to verify the suitability of the cable assembly before use or production.

Receptacle

Waterproof / Non-waterproof combined use type

PDF page 4 diagram
PDF page 4 diagram
PDF page 4 diagram

(Representative example)

Part No. HRS No. RoHS
HR22-12WTRA-20SC(73) 122-0021-6 73 Yes
HR22-12WTRA-20PC(73) 122-0005-0 73

Crimp type

Part No. HRS No. A RoHS
HR22-12WTRA-20S(73) 122-0014-0 73 24 Yes
HR22-12WTRA-20P(73) 122-0013-8 73 25.5

Solder type

Page 5

Jack

Waterproof type

PDF page 5 diagram
PDF page 5 diagram

15.8 20(HEX)

(Representative example)

Part No. HRS No. RoHS
HR22-12WTJA-20SC(73) 122-0025-7 73 Yes
HR22-12WTJA-20PC(73) 122-0006-2 73

Crimp type

Cable clamping force, rotation force, waterproof performance, and other types of performance may differ depending on the cable type used. Please make sure to verify the suitability of the cable assembly before use or production.

Non-waterproof type

PDF page 5 diagram
PDF page 5 diagram

15.8 20(HEX)

(Representative example)

Part No. HRS No. RoHS
HR22-12TJD-20S(73) 122-0023-1 73 Yes
HR22-12TJD-20P(73) 122-0022-9 73

Solder type

Cable clamping force, rotation force, waterproof performance, and other types of performance may differ depending on the cable type used. Please make sure to verify the suitability of the cable assembly before use or production.

Page 6

Contact

Male contact

Female contact

A
A 14.8
PDF page 6 diagram

1.2

1.2

Male contact

Item Part No. HRS No. Applicable cable Packaging RoHS
Loose contact HR22-PC-122 122-0017-9 24 to 28 AWG Insulation diameter Ø1.15MAX 100 pcs/pack Yes
Reel contact HR22-PC-222 122-0009-0 10,000 pcs/reel

Female contact

Item Part No. HRS No. Applicable cable Packaging RoHS
Loose contact HR22-SC-122 122-0016-6 24 to 28 AWG Insulation diameter Ø1.15MAX 100 pcs/pack Yes
Reel contact HR22-SC-222 122-0008-8 10,000 pcs/reel

Applicable tools

Item Part No. HRS No. Applicable terminal Applicable wire
Manual crimping tool HR22-TA2428HC 150-0200-4 HR22-PC-122 HR22-SC-122 24 to 28 AWG Insulation diameter Ø1.15MAX
Automatic crimping tool Machine body CM-105C 901-0001-0 ―――― ――――
Applicator AP105-HR22-2 901-2023-7 HR22-PC-222 HR22-SC-222 24 to 28 AWG Insulation diameter Ø1.15MAX
Cable crimping tool HR10A-TC-04 150-0058-5 ―――― Ø8.5
Extractor RP6-SC-TP 150-0039-0 ―――― ――――
Cable termination tool HR22-12P-T01 150-0075-4 ―――― Plug connector use
PDF page 6 diagram
PDF page 6 diagram
PDF page 6 diagram
PDF page 6 diagram

Automatic crimping

machine

CM-105C

Page 7

Panel mounting dimensions

15.85 +0.05

PDF page 7 diagram

Panel thickness t: 1 to 3mm

Precautions

Pin allocation 11 5 12 17 6 1 18 13 7 2 14 19 8 3 15 20 9 4 6 0 1 1
Solder pot inner dia. Ø0.8

Notes: The above figure shows the pin allocation viewed from the engagement side.

  1. Switch off the power of the circuit before disconnecting or plugging-in the connectors.
  1. Use connectors with socket contacts at the power side of the circuit.
  1. Make sure that the coupling is in completely cocked position.
  1. The cable pull and twisting strength and other characteristics may differ, depending on the cable structure. Please confirm before the use.
  1. This product uses silver plated contacts. Please be aware that silver easily reacts to sulfur gases, causing discoloration or degradation when exposed to certain environmental conditions as shown below. These conditions include areas with:
  • Dusty site
  • Area or location with a high density of sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas, or other gas (Emission gases from vehicles and factories, etc.)
  • Highly fluctuating temperatures, such as close to a heating apparatus.

In addition, it is recommended to store the products in their original packaging or similar state in order to prevent discoloration.

  • Temperature : -10 to +60ç, relative humidity : 80% or lower (An environment where temperature and relative humidity are constant and there is little temperature variation.)

Please use the products within six months after delivery. (lf the storage period has expired, please examine the connectors and solder cups for corrosion and/or tarnish.)

Page 8

USA:

USA:

HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE

2300 Warrenville Road, Suite 150,

2841 Junction Ave, Suite 200

Downers Grove, IL 60515

San Jose, CA. 95134

Phone : +1-630-282-6700

Phone : +1-408-253-9640

http://www.hirose.com/us/

Fax : +1-408-253-9641 http://www.hirose.com/us/

USA:

THE NETHERLANDS:

HIROSE ELECTRIC (U.S.A.), INC. BOSTON OFFICE HIROSE ELECTRIC EUROPE B.V.

300 Brickstone Square Suite 201,

Hogehillweg #8 1101 CC Amsterdam Z-O

Andover, MA 01810

Phone : +31-20-6557460

Phone : +1-978-662-5255

Fax : +31-20-6557469 http://www.hirose.com/eu/

GERMANY:

GERMANY:

HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE

Neumeyerstrasse 22-26, 90411 Nurnberg

Bayernstr. 3, Haus C 30855 Langenhagen, Germany Phone : +49-511 97 82 61 30

Phone : +49-911 32 68 89 63

Fax : +49-511 97 82 61 35

Fax : +49-911 32 68 89 69

http://www.hirose.com/eu/

http://www.hirose.com/eu/

UNITED KINGDOM:

CHINA:

HIROSE ELECTRIC (CHINA) CO., LTD. (SHANGHAI, HEADQUARTERS)

HIROSE ELECTRIC EUROPE BV (UK BRANCH)

18, Enterprise Center Tower 2, 209# Gong He

4 Newton Court, Kelvin Drive, Knowlhill,

Road, Jing’an District, Shanghai, CHINA 200070

Milton Keynes, MK5 8NH

Phone : +86-21-6391-3355

Phone : +44-1908 202050

Fax : +86-21-6391-3335

Fax : +44-1908 202058

http://www.hirose.com/cn/

http://www.hirose.com/eu/

CHINA:

HONG KONG:

HIROSE ELECTRIC (CHINA) CO., LTD. SHENZHEN BRANCH HIROSE ELECTRIC HONGKONG TRADING CO., LTD.

Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, Room 1001, West Wing, Tsim Sha Tsui Centre, 66

Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong

5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008 Phone : +86-755-8207-0851

Phone : +852-2803-5338

Fax : +86-755-8207-0873

Fax : +852-2591-6560

http://www.hirose.com/cn/

http://www.hirose.com/hk/

SINGAPORE:

KOREA:

HIROSE ELECTRIC SINGAPORE PTE. LTD.

HIROSE KOREA CO.,LTD.

143, Gongdan 1-daero, Siheung-si,

03, Anson Road, #20-01, Springleaf Tower,

Gyeonggi-do, 15084, Korea

Singapore 079909

Phone : +82-31-496-7000

Phone : +65-6324-6113 Fax : +65-6324-6123

Fax : +82-31-496-7100

http://www.hirose.com/sg/

http://www.hirose.co.kr/

MALAYSIA:

INDIA:

HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE PENANG REPRESENTATIVE OFFICE

Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma 73-3-1, Ideal@The One, Jalan Mahsuri, Bayan Gandhi (MG) Road, Bangalore 560 001, Karnataka, India

Lepas Penang, 11950, Malaysia

Phone : +91-80-4120 1907

Phone : +604-648-5536

Fax : +91-80-4120 9908

http://www.hirose.com/sg/

http://www.hirose.com/sg/

PDF page 8 diagram

USA:

HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE)

17197 N. Laurel Park Drive, Suite 253, Livonia, MI 48152 Phone : +1-734-542-9963 Fax : +1-734-542-9964 http://www.hirose.com/us/

GERMANY: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH

Schoenbergstr. 20, 73760 ostfildern Phone : +49-711-456002-1 Fax : +49-711-456002-299 http://www.hirose.com/eu/

FRANCE: HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE

130 Avenue Joseph Kessel, Bat E, 78960 Voisins le Bretonneux, France Phone : +33-1-85764886 Fax : +33-1-85764823 http://www.hirose.com/eu/

CHINA: HIROSE ELECTRIC (CHINA) CO.,LTD. BEIJING BRANCH

A1001, Ocean International Center, Building 56# East 4th Ring Middle Road, ChaoYang District, Beijing, 100025 Phone : +86-10-5165-9332 Fax : +86-10-5908-1381 http://www.hirose.com/cn/

TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD.

103 8F, No.87, Zhengzhou Rd., Taipei Phone : +886-2-2555-7377 Fax : +886-2-2555-7355 http://www.hirose.com/tw/

INDIA:

HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE

Office NO.552, Regus-Green Boulevard, Level5, Tower C, Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India Phone : +91-12-660-8018 Fax : +91-120-4804949 http://www.hirose.com/sg/

THAILAND: BANGKOK OFFICE (REPRESENTATIVE OFFICE)

Unit 4703, 47th FL., 1 Empire Tower, South Sathorn Road, Yannawa, Sathorn, Bangkok 10120 Thailand Phone : +66-2-686-1255 Fax : +66-2-686-3433 http://www.hirose.com/sg/

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 07/2018. Contents are subject to change without notice for the purpose of improvements.