HGTD7N60C3 HARRIS
Document overview
- PDF pages: 6
Technical content
Page 1
HGTD7N60C3,
HGTD7N60C3S, HGTP7N60C3
S E M I C O N D U C T O R
14A, 600V, UFS Series N-Channel IGBTs
January 1997
Packaging
Features
- 14A, 600V at TC = 25oC
- 600V Switching SOA Capability
- Typical Fall Time . . . . . . . . . . . . . . 140ns at TJ = 150oC
- Short Circuit Rating
- Low Conduction Loss
Description
The HGTD7N60C3, HGTD7N60C3S and HGTP7N60C3 are MOS gated high voltage switching devices combining the best features of MOSFETs and bipolar transistors. These devices have the high input impedance of a MOSFET and the low on-state conduction loss of a bipolar transistor. The much lower on-state voltage drop varies only moderately between 25oC and 150oC. The IGBT is ideal for many high voltage switching applications operating at moderate frequencies where low conduction losses are essential, such as: AC and DC motor controls, power supplies and drivers for solenoids, relays and contactors.
PACKAGING AVAILABILITY
JEDEC TO-220AB
COLLECTOR
EMITTER
GATE
COLLECTOR (FLANGE)
JEDEC TO-251AA
COLLECTOR
EMITTER
GATE
COLLECTOR
(FLANGE)
JEDEC TO-252AA
COLLECTOR
GATE
(FLANGE)
EMITTER
Terminal Diagram
| PART NUMBER | PACKAGE | BRAND |
|---|---|---|
| HGTD7N60C3 | TO-251AA | G7N60C |
| HGTD7N60C3S | TO-252AA | G7N60C |
| HGTP7N60C3 | TO-220AB | G7N60C3 |
NOTE: When ordering, use the entire part number. Add the suffix 9A to obtain the TO-252AA variant in tape and reel, i.e. HGTD7N60C3S9A. Formerly Developmental Type TA49115.
Absolute Maximum Ratings TC = 25oC, Unless Otherwise Specified
N-CHANNEL ENHANCEMENT MODE
C
G
E
HGTD7N60C3, HGTD7N60C3S
HGTP7N60C3
UNITS
Collector-Emitter Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BVCES
600
V
Collector Current Continuous At TC = 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IC25
14
A
At TC = 110oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IC110
7
A
Collector Current Pulsed (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ICM
56
A
Gate-Emitter Voltage Continuous. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGES
±20
V
Gate-Emitter Voltage Pulsed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGEM
±30
V
Switching Safe Operating Area at TJ = 150oC, Figure 14 . . . . . . . . . . . . . . . . . . . . . . . .SSOA
40A at 480V
Power Dissipation Total at TC = 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD
60
W
Power Dissipation Derating TC > 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
W/oC
0.48
Reverse Voltage Avalanche Energy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EARV
100
mJ oC
Operating and Storage Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . TJ, TSTG
-40 to 150
oC
Maximum Lead Temperature for Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TL
260
Short Circuit Withstand Time (Note 2) at VGE = 15V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . tSC
1
µs
Short Circuit Withstand Time (Note 2) at VGE = 10V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . tSC
8
µs
NOTES: 1. Repetitive Rating: Pulse width limited by maximum junction temperature. 2. VCE(PK) = 360V, TJ = 125oC, RGE = 50Ω.
CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper ESD handling procedures.
File Number 4141.2
Copyright © Harris Corporation 1997
3-16
Page 2
Electrical Specifications TC = 25oC, Unless Otherwise Specified
| PARAMETER | SYMBOL | TEST CONDITIONS | MIN | TYP | MAX | UNITS | |
|---|---|---|---|---|---|---|---|
| Collector-Emitter Breakdown Voltage | BVCES | IC = 250µA, VGE = 0V | 600 | - | - | V | |
| Emitter-Collector Breakdown Voltage | BVECS | IC = 3mA, VGE = 0V | 16 | 30 | - | V | |
| Collector-Emitter Leakage Current | ICES | VCE = BVCES | TC = 25oC | - | - | 250 | µA |
| VCE = BVCES | TC = 150oC | - | - | 2.0 | mA | ||
| Collector-Emitter Saturation Voltage | VCE(SAT) | IC = IC110, VGE = 15V | TC = 25oC | - | 1.6 | 2.0 | V |
| TC = 150oC | - | 1.9 | 2.4 | V | |||
| Gate-Emitter Threshold Voltage | VGE(TH) | IC = 250µA, VCE = VGE | TC = 25oC | 3.0 | 5.0 | 6.0 | V |
| Gate-Emitter Leakage Current | IGES | VGE = ±25V | - | - | ±250 | nA | |
| Switching SOA | SSOA | TJ = 150oC RG = 50Ω VGE = 15V L = 1mH | VCE(PK) = 480V | 40 | - | - | A |
| VCE(PK) = 600V | 6 | - | - | A | |||
| Gate-Emitter Plateau Voltage | VGEP | IC = IC110, VCE = 0.5 BVCES | - | 8 | - | V | |
| On-State Gate Charge | QG(ON) | IC = IC110, VCE = 0.5 BVCES | VGE = 15V | - | 23 | 30 | nC |
| VGE = 20V | - | 30 | 38 | nC | |||
| Current Turn-On Delay Time | tD(ON)I | TJ = 150oC ICE = IC110 VCE(PK) = 0.8 BVCES VGE = 15V RG= 50Ω L = 1.0mH | - | 8.5 | - | ns | |
| Current Rise Time | tRI | - | 11.5 | - | ns | ||
| Current Turn-Off Delay Time | tD(OFF)I | - | 350 | 400 | ns | ||
| Current Fall Time | tFI | - | 140 | 275 | ns | ||
| Turn-On Energy | EON | - | 165 | - | µJ | ||
| Turn-Off Energy (Note 3) | EOFF | - | 600 | - | µJ | ||
| Thermal Resistance | RθJC | - | - | 2.1 | oC/W | ||
NOTE: 3. Turn-Off Energy Loss (EOFF) is defined as the integral of the instantaneous power loss starting at the trailing edge of the input pulse and ending at the point where the collector current equals zero (ICE = 0A). The HGTD7N60C3, HGTD7N60C3S and HGTP7N60C3 were tested per JEDEC standard No. 24-1 Method for Measurement of Power Device Turn-Off Switching Loss. This test method produces the true total Turn-Off Energy Loss. Turn-On losses include diode losses.
HARRIS SEMICONDUCTOR IGBT PRODUCT IS COVERED BY ONE OR MORE OF THE FOLLOWING U.S. PATENTS:
4,364,073
4,417,385
4,430,792
4,443,931
4,466,176
4,516,143
4,532,534
4,567,641
4,587,713
4,598,461
4,605,948
4,618,872
4,620,211
4,631,564
4,639,754
4,639,762
4,641,162
4,644,637
4,682,195
4,684,413
4,694,313
4,717,679
4,743,952
4,783,690
4,794,432
4,801,986
4,803,533
4,809,045
4,809,047
4,810,665
4,823,176
4,837,606
4,860,080
4,883,767
4,888,627
4,890,143
4,901,127
4,904,609
4,933,740
4,963,951
3-17
Page 3

Page 4

Page 5

Page 6
Test Circuit and Waveform
L = 1mH
RHRD660
RG = 50Ω
+
VDD = 480V
-
FIGURE 18. INDUCTIVE SWITCHING TEST CIRCUIT
Handling Precautions for IGBTs
Insulated Gate Bipolar Transistors are susceptible to gateinsulation damage by the electrostatic discharge of energy through the devices. When handling these devices, care should be exercised to assure that the static charge built in the handler’s body capacitance is not discharged through the device. With proper handling and application procedures, however, IGBTs are currently being extensively used in production by numerous equipment manufacturers in military, industrial and consumer applications, with virtually no damage problems due to electrostatic discharge. IGBTs can be handled safely if the following basic precautions are taken: 1. Prior to assembly into a circuit, all leads should be kept
shorted together either by the use of metal shorting springs or by the insertion into conductive material such as “ECCOSORBD LD26” or equivalent. 2. When devices are removed by hand from their carriers, the hand being used should be grounded by any suitable means - for example, with a metallic wristband. 3. Tips of soldering irons should be grounded. 4. Devices should never be inserted into or removed from circuits with power on. 5. Gate Voltage Rating - Never exceed the gate-voltage rating of VGEM. Exceeding the rated VGE can result in permanent damage to the oxide layer in the gate region. 6. Gate Termination - The gates of these devices are es- sentially capacitors. Circuits that leave the gate open-
circuited or floating should be avoided. These conditions can result in turn-on of the device due to voltage buildup on the input capacitor due to leakage currents or pickup. 7. Gate Protection - These devices do not have an internal monolithic Zener diode from gate to emitter. If gate protection is required an external Zener is recommended.
ECCOSORBD is a Trademark of Emerson and Cumming, Inc.
90%
10%
VGE
EOFF EON
VCE
90%
10%
ICE
tD(OFF)I
tRI
tFI
tD(ON)I
FIGURE 19. SWITCHING TEST WAVEFORMS
Operating Frequency Information
Operating Frequency Information for a Typical Device Figure 13 is presented as a guide for estimating device performance for a specific application. Other typical frequency vs collector current (ICE) plots are possible using the information shown for a typical unit in Figures 4, 7, 8, 11 and 12. The operating frequency plot (Figure 13) of a typical device shows fMAX1 or fMAX2 whichever is smaller at each point. The information is based on measurements of a typical device and is bounded by the maximum rated junction temperature. fMAX1 is defined by fMAX1 = 0.05/(tD(OFF)I + tD(ON)I). Deadtime (the denominator) has been arbitrarily held to 10% of the on- state time for a 50% duty factor. Other definitions are
possible. tD(OFF)I and tD(ON)I are defined in Figure 19. Device turn-off delay can establish an additional frequency limiting condition for an application other than TJMAX. tD(OFF)I is important when controlling output ripple under a lightly loaded condition. fMAX2 is defined by fMAX2 = (PD - PC)/(EOFF + EON). The allowable dissipation (PD) is defined by PD = (TJMAX - TC)/RθJC. The sum of device switching and conduction losses must not exceed PD. A 50% duty factor was used (Figure 13) and the conduction losses (PC) are approximated by PC = (VCE x ICE)/2. EON and EOFF are defined in the switching waveforms shown in Figure 19. EON is the integral of the instantaneous power loss (ICE x VCE) during turn-on and
EOFF is the integral of the instantaneous power loss (ICE x VCE) during turn-off. All tail losses are included in the calculation for EOFF; i.e. the collector current equals zero (ICE = 0).
3-21