HGTD2N120CNS FAIRCHILD
Document overview
- PDF pages: 9
Technical content
Page 1
March 2005
HGTP2N120CN, HGT1S2N120CN
13A, 1200V, NPT Series N-Channel IGBT
Features
- 13A, 1200V, TC = 25°C
- 1200V Switching SOA Capability
- Typical Fall Time 360ns at TJ = 150°C
- Short Circuit Rating
- Low Conduction Loss
- Avalanche Rated
- Temperature Compensating SABER™ Model Thermal Impedance SPICE Model
- Related Literature
- TB334 “Guidelines for Soldering Surface Mount Components to PC Boards”
Ordering Informations
| Part Number | Package | Brand |
|---|---|---|
| HGTP2N120CN | TO-220AB | 2N120CN |
| HGT1S2N120CN | TO-262 | 2N120CN |
Note: When ordering, use the entire part number. Add the suffix 9A to obtain the TO- 263AB and TO-252AA variant in tape and reel, e.g., HGT1S2N120CNS9A.
E C
COLLECTOR
G
(FLANGE)
COLLECTOR (FLANGE)
TO-220
Description
The HGTP2N120CN and HGT1S2N120CN are Non-Punch Through (NPT) IGBT designs. They are new members of the MOS gated high voltage switching IGBT family. IGBTs combine the best features of MOSFETs and bipolar transistors. This device has the high input impedance of a MOSFET and the low on-state conduction loss of a bipolar transistor.
The IGBT is ideal for many high voltage switching applications operating at moderate frequencies where low conduction losses are essential, such as: AC and DC motor controls, power supplies and drivers for solenoids, relays and contactors.
Formerly Developmental Type TA49313
C
E C G
G
TO-262
E
FAIRCHILD SEMICONDUCTOR IGBT PRODUCT IS COVERED BY ONE OR MORE OF THE FOLLOWING U.S. PATENTS
| 4,364,073 | 4,417,385 | 4,430,792 | 4,443,931 | 4,466,176 | 4,516,143 | 4,532,534 | 4,587,713 |
| 4,598,461 | 4,605,948 | 4,620,211 | 4,631,564 | 4,639,754 | 4,639,762 | 4,641,162 | 4,644,637 |
| 4,682,195 | 4,684,413 | 4,694,313 | 4,717,679 | 4,743,952 | 4,783,690 | 4,794,432 | 4,801,986 |
| 4,803,533 | 4,809,045 | 4,809,047 | 4,810,665 | 4,823,176 | 4,837,606 | 4,860,080 | 4,883,767 |
| 4,888,627 | 4,890,143 | 4,901,127 | 4,904,609 | 4,933,740 | 4,963,951 | 4,969,027 |
©2005 Fairchild Semiconductor Corporation
Page 2
Absolute Maximum Ratings TC = 25°C, Unless Otherwise Specified


| Symbol | Parameter | Test Conditions | Min. | Typ. | Max. | Units | |
|---|---|---|---|---|---|---|---|
| BV CES | Collector to Emitter Breakdown Voltage | I = 250µA, V = 0V C GE | 1200 | - | - | V | |
| BV ECS | Emitter to Collector Breakdown Voltage | I = 10mA, V = 0V C GE | 15 | - | - | V | |
| I CES | Collector to Emitter Leakage Current | V = 1200V CE | T = 25°C J | - | - | 100 | µA |
| T = 125°C J | - | 100 | - | µA | |||
| T = 150°C J | - | - | 1.0 | mA | |||
| V CE(SAT) | Collector to Emitter Saturation Voltage | I = 2.6A, C V = 15V GE | T = 25°C J | - | 2.05 | 2.40 | V |
| T = 150°C J | - | 2.75 | 3.50 | V | |||
| V GE(TH) | Gate to Emitter Threshold Voltage | I = 45µA, V = V C CE GE | 6.4 | 6.7 | - | V | |
| I GES | Gate to Emitter Leakage Current | V = ±20V GE | - | - | ±250 | nA | |
| SSOA | Switching SOA | T = 150°C, R = 51Ω, V = 15V J G GE L = 5mH, V = 1200V CE(PK) | 13 | - | - | A | |
| V GEP | Gate to Emitter Plateau Voltage | I = 2.6A, V = 600V C CE | - | 10.2 | - | V | |
| Q g(ON) | On-State Gate Charge | I = 2.6A, C V = 600V CE | V = 15V GE | - | 30 | 36 | nC |
| V = 20V GE | - | 36 | 43 | nC | |||

Page 3
Electrical Characteristics TC = 25°C unless otherwise noted (Continued)
| Symbol | Parameter | Test Conditions | Min. | Typ. | Max. | Units |
|---|---|---|---|---|---|---|
| t d(ON)l | Current Trun-On Delay Time | IGBT and Diode at T = 25°C J I = 2.6A CE V = 960V CE V = 15V GE R = 51Ω G L = 5mH Test Circuit (Figure 18) | - | 25 | 30 | ns |
| t rl | Current Rise Time | - | 11 | 15 | ns | |
| t d(OFF)l | Curent Turn-Off Delay Time | - | 205 | 220 | ns | |
| t fl | Current Fall Time | - | 260 | 320 | ns | |
| E ON1 | Turn-On Energy (Note 4) | - | 96 | - | µJ | |
| E ON2 | Turn-On Energy (Note 4) | - | 425 | 590 | µJ | |
| E OFF | Turn-Off Energy (Note 5) | - | 355 | 390 | µJ | |
| t d(ON)l | Curent Turn-On Delay Time | IGBT and Diode at T = 150°C J I = 2.6A CE V = 960V CE V = 15V GE R = 51Ω G L = 5mH Test Circuit (Figure 18) | - | 21 | 25 | ns |
| t rl | Current Rise Time | - | 11 | 15 | ns | |
| t d(OFF)l | Curent Turn-Off Delay Time | - | 225 | 240 | ns | |
| t fl | Current Fall Time | - | 360 | 420 | ns | |
| E ON1 | Turn-On Energy (Note 4) | - | 96 | - | µJ | |
| E ON2 | Turn-On Energy (Note 4) | - | 800 | 1100 | µJ | |
| E OFF | Turn-Off Energy (Note 5) | - | 530 | 580 | µJ | |
| R θJC | Thermal Resistance Junction to Case | - | - | 1.20 | °C/W |
Notes: 4. Values for two Turn-On loss conditions are shown for the convenience of the circuit designer. EON1 is the turn-on loss of the IGBT only. EON2 is the turn-on loss when a typical diode is used in the test circuit and the diode is at the same TJ as the IGBT. The diode type is specified in Figure 18. 5. Turn-Off Energy Loss (EOFF) is defined as the integral of the instantaneous power loss starting at the trailing edge of the input pulse and ending at the point where the collector current equals zero (ICE = 0A). All devices were tested per JEDEC Standard No. 24-1 Method for Measurement of Power Device Turn-Off Switching Loss. This test method
produces the true total Turn-Off Energy Loss.
Page 4

Page 5

Page 6

Page 7

Page 8
Handling Precautions for IGBTs
Insulated Gate Bipolar Transistors are susceptible to gate-insulation damage by the electrostatic discharge of energy through the devices. When handling these devices, care should be exercised to assure that the static charge built in the handler’s body capacitance is not discharged through the device. With proper handling and application procedures, however, IGBTs are currently being extensively used in production by numerous equipment manufacturers in military, industrial and consumer applications, with virtually no damage problems due to electrostatic discharge. IGBTs can be handled safely if the following basic precautions are taken:
- Prior to assembly into a circuit, all leads should be kept shorted together either by the use of metal shorting springs or by the insertion into conductive material such as “ECCOSORBD™ LD26” or equivalent.
- When devices are removed by hand from their carriers, the hand being used should be grounded by any suitable means - for example, with a metallic wristband.
- Tips of soldering irons should be grounded.
- Devices should never be inserted into or removed from circuits with power on.
- Gate Voltage Rating - Never exceed the gate-voltage rating of VGEM. Exceeding the rated VGE can result in permanent damage to the oxide layer in the gate region.
- Gate Termination - The gates of these devices are essentially capacitors. Circuits that leave the gate open-circuited or floating should be avoided. These conditions can result in turn-on of the device due to voltage buildup on the input capacitor due to leakage currents or pickup.
- Gate Protection - These devices do not have an internal monolithic Zener diode from gate to emitter. If gate protection is required, an external Zener is recommended.
Operating Frequency Information
Operating frequency information for a typical device (Figure 3) is presented as a guide for estimating device performance for a specific application. Other typical frequency vs collector current (ICE) plots are possible using the information shown for a typical unit in Figures 5, 6, 7, 8, 9 and 11. The operating frequency plot (Figure 3) of a typical device shows fMAX1 or fMAX2; whichever is smaller at each point. The information is based on measurements of a typical device and is bounded by the maximum rated junction temperature.
fMAX1 is defined by fMAX1 = 0.05/(td(OFF)I+ td(ON)I). Deadtime (the denominator) has been arbitrarily held to 10% of the on- state time for a 50% duty factor. Other definitions are possible. td(OFF)I and td(ON)I are defined in Figure 19. Device turn-off delay can establish an additional frequency limiting condition for an application other than TJM. td(OFF)I is important when controlling output ripple under a lightly loaded condition.
fMAX2 is defined by fMAX2 = (PD - PC)/(EOFF + EON2). The allowable dissipation (PD) is defined by PD = (TJM - TC)/RθJC. The sum of device switching and conduction losses must not exceed PD. A 50% duty factor was used (Figure 3) and the conduction losses (PC) are approximated by PC = (VCE x ICE)/2. EON2 and EOFF are defined in the switching waveforms shown in Figure 19. EON2 is the integral of the instantaneous power loss (ICE x VCE) during turn-on and EOFF is the integral of the instantaneous power loss (ICE x VCE) during turn-off. All tail losses are included in the calculation for EOFF; i.e., the collector current equals zero (ICE = 0).
Page 9
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
FAST®
ACEx™
POP™
IntelliMAX™
SPM™
Power247™
FASTr™
ISOPLANAR™
Stealth™
ActiveArray™
PowerEdge™
FPS™
LittleFET™
SuperFET™
Bottomless™
MICROCOUPLER™
FRFET™
CoolFET™
GlobalOptoisolator™
MicroFET™
CROSSVOLT™
GTO™
MicroPak™
DOME™
HiSeC™
MICROWIRE™
EcoSPARK™
I2C™
E2CMOS™
MSX™
i-Lo™
MSXPro™
EnSigna™
ImpliedDisconnect™
OCX™
FACT™
OCXPro™
FACT Quiet Series™
OPTOLOGIC®
Across the board. Around the world.™
PowerSaver™
SuperSOT™-3
PowerTrench®
SuperSOT™-6
QFET®
SuperSOT™-8
QS™
SyncFET™ TinyLogic®
QT Optoelectronics™ Quiet Series™
TINYOPTO™
RapidConfigure™
TruTranslation™
RapidConnect™
UHC™ UltraFET®
µSerDes™
OPTOPLANAR™
SILENT SWITCHER®
UniFET™
The Power Franchise®
PACMAN™
VCX™
SMART START™
Programmable Active Droop™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein:
- Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
- A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
| Datasheet Identification | Product Status | Definition |
| Advance Information | Formative or In Design | This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. |
| Preliminary | First Production | This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. |
| No Identification Needed | Full Production | This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. |
| Obsolete | Not In Production | This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. |
Rev. I15