HGTP12N60C3D FAIRCHILD

Document overview

  • PDF pages: 8

Technical content

Page 1

Data Sheet

24A, 600V, UFS Series N-Channel IGBT

with Anti-Parallel Hyperfast Diodes

This family of MOS gated high voltage switching devices combine the best features of MOSFETs and bipolar transistors. The device has the high input impedance of a MOSFET and the low on-state conduction loss of a bipolar transistor. The much lower on-state voltage drop varies only moderately between 25oC and 150oC. The IGBT used is the development type TA49123. The diode used in anti-parallel with the IGBT is the development type TA49188.

The IGBT is ideal for many high voltage switching applications operating at moderate frequencies where low conduction losses are essential.

Formerly Developmental Type TA49182.

Ordering Information

PART NUMBER PACKAGE BRAND
HGTP12N60C3D TO-220AB 12N60C3D
HGT1S12N60C3DS TO-263AB 12N60C3D

NOTE: When ordering, use the entire part number. Add the suffix 9A to obtain the TO-263 variant in Tape and Reel, i.e., HGT1S12N60C3DS9A.

Symbol

C

G

E

December 2001

Features

  • 24A, 600V at TC = 25oC
  • Typical Fall Time at TJ = 150oC . . . . . . . . . . . . . . . . 210ns
  • Short Circuit Rating
  • Low Conduction Loss
  • Hyperfast Anti-Parallel Diode

Packaging

JEDEC TO-220AB

E C

PDF page 1 diagram

JEDEC TO-263AB

COLLECTOR

(FLANGE)

G

E

FAIRCHILD CORPORATION IGBT PRODUCT IS COVERED BY ONE OR MORE OF THE FOLLOWING U.S. PATENTS

4,364,073

4,417,385

4,430,792

4,443,931

4,466,176

4,516,143

4,532,534

4,587,713

4,598,461

4,605,948

4,620,211

4,631,564

4,639,754

4,639,762

4,641,162

4,644,637

4,682,195

4,684,413

4,694,313

4,717,679

4,743,952

4,783,690

4,794,432

4,801,986

4,803,533

4,809,045

4,809,047

4,810,665

4,823,176

4,837,606

4,860,080

4,883,767

4,888,627

4,890,143

4,901,127

4,904,609

4,933,740

4,963,951

4,969,027

Page 2

Absolute Maximum Ratings TC = 25oC, Unless Otherwise Specified

ALL TYPES

UNITS

600

V

Collector to Emitter Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BVCES Collector Current Continuous At TC = 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IC25

24

A

At TC = 110oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IC110

12

A

Average Diode Forward Current at 110oC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I(AVG)

12

A

Collector Current Pulsed (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ICM

96

A

Gate to Emitter Voltage Continuous. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGES

±20

V

±30

V

Gate to Emitter Voltage Pulsed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGEM Switching Safe Operating Area at TJ = 150oC (Figure 14) . . . . . . . . . . . . . . . . . . . . . . SSOA

24A at 600V

Power Dissipation Total at TC = 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD

104

W

Power Dissipation Derating TC > 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

W/oC

0.83

oC

Operating and Storage Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . TJ, TSTG

-40 to 150

oC

260

Maximum Lead Temperature for Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TL Short Circuit Withstand Time (Note 2) at VGE = 15V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . tSC

4

µs

Short Circuit Withstand Time (Note 2) at VGE = 10V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . tSC

13

µs

CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

NOTES: 1. Repetitive Rating: Pulse width limited by maximum junction temperature. 2. VCE(PK) = 360V, TJ = 125oC, RG = 25Ω.

Electrical Specifications TC = 25oC, Unless Otherwise Specified

PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNITS
Collector to Emitter Breakdown Voltage BVCES IC = 250µA, VGE = 0V 600 - - V
Collector to Emitter Leakage Current ICES VCE = BVCES TC = 25oC - - 250 µA
TC = 150oC - - 2.0 mA
Collector to Emitter Saturation Voltage VCE(SAT) IC = IC110, VGE = 15V TC = 25oC - 1.65 2.0 V
TC = 150oC - 1.85 2.2 V
IC = 15A, VGE = 15V TC = 25oC - 1.80 2.2 V
TC = 150oC - 2.0 2.4 V
Gate to Emitter Threshold Voltage VGE(TH) IC = 250µA, VCE = VGE 3.0 5.0 6.0 V
Gate to Emitter Leakage Current IGES VGE = ±20V - - ±100 nA
Switching SOA SSOA TJ = 150oC, VGE = 15V, RG = 25Ω, L = 100µH VCE(PK) = 480V 80 - - A
VCE(PK) = 600V 24 - - A
Gate to Emitter Plateau Voltage VGEP IC = IC110, VCE = 0.5 BVCES - 7.6 - V
On-State Gate Charge Qg(ON) IC = IC110, VCE = 0.5 BVCES VGE = 15V - 48 55 nC
VGE = 20V - 62 71 nC
Current Turn-On Delay Time td(ON)I TJ = 150oC, ICE = IC110, VCE(PK) = 0.8 BVCES, VGE = 15V, RG = 25Ω, L = 100µH - 28 - ns
Current Rise Time tri - 20 - ns
Current Turn-Off Delay Time td(OFF)I - 270 400 ns
Current Fall Time tfi - 210 275 ns
Turn-On Energy EON - 380 - µJ
Turn-Off Energy (Note 3) EOFF - 900 - µJ
Diode Forward Voltage VEC IEC = 12A - 1.7 2.1 V

Page 3

Electrical Specifications TC = 25oC, Unless Otherwise Specified (Continued)

PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNITS
Diode Reverse Recovery Time trr IEC = 12A, dIEC/dt = 200A/µs - 32 40 ns
IEC = 1.0A, dIEC/dt = 200A/µs - 23 30 ns
Thermal Resistance RθJC IGBT - - 1.2 oC/W
Diode - - 1.9 oC/W

NOTE: 3. Turn-Off Energy Loss (EOFF) is defined as the integral of the instantaneous power loss starting at the trailing edge of the input pulse, and ending at the point where the collector current equals zero (ICE = 0A). This family of devices was tested per JEDEC Standard No. 24-1 Method for Measurement of Power Device Turn-Off Switching Loss. This test method produces the true total Turn-Off Energy Loss. Turn-On losses include losses due to diode recovery.

Typical Performance Curves

PDF page 3 diagram

VGE, GATE TO EMITTER VOLTAGE (V)

FIGURE 1. TRANSFER CHARACTERISTICS

PDF page 3 diagram

VCE, COLLECTOR TO EMITTER VOLTAGE (V)

FIGURE 3. COLLECTOR TO EMITTER ON-STATE VOLTAGE

PULSE DURATION = 250µs, DUTY CYCLE <0.5%, TC = 25oC

PDF page 3 diagram

VCE, COLLECTOR TO EMITTER VOLTAGE (V)

FIGURE 2. SATURATION CHARACTERISTICS

PDF page 3 diagram

VCE, COLLECTOR TO EMITTER VOLTAGE (V)

FIGURE 4. COLLECTOR TO EMITTER ON-STATE VOLTAGE

Page 4

Typical Performance Curves (Continued)

PDF page 4 diagram

TC, CASE TEMPERATURE (oC)

FIGURE 5. MAXIMUM DC COLLECTOR CURRENT vs CASE

TEMPERATURE

PDF page 4 diagram

ICE, COLLECTOR TO EMITTER CURRENT (A)

FIGURE 7. TURN ON DELAY TIME vs COLLECTOR TO

EMITTER CURRENT

PDF page 4 diagram

ICE, COLLECTOR TO EMITTER CURRENT (A)

FIGURE 9. TURN ON RISE TIME vs COLLECTOR TO

EMITTER CURRENT

PDF page 4 diagram

VGE, GATE TO EMITTER VOLTAGE (V)

FIGURE 6. SHORT CIRCUIT WITHSTAND TIME

PDF page 4 diagram

5 10 15 20 25 30

ICE, COLLECTOR TO EMITTER CURRENT (A)

FIGURE 8. TURN OFF DELAY TIME vs COLLECTOR TO

EMITTER CURRENT

PDF page 4 diagram

5 10 15 20 25 30

ICE, COLLECTOR TO EMITTER CURRENT (A)

FIGURE 10. TURN OFF FALL TIME vs COLLECTOR TO

EMITTER CURRENT

Page 5

Typical Performance Curves (Continued)

PDF page 5 diagram

ICE, COLLECTOR TO EMITTER CURRENT (A)

FIGURE 11. TURN ON ENERGY LOSS vs COLLECTOR TO

EMITTER CURRENT

PDF page 5 diagram

ICE, COLLECTOR TO EMITTER CURRENT (A)

FIGURE 13. OPERATING FREQUENCY vs COLLECTOR TO

EMITTER CURRENT

PDF page 5 diagram

VCE, COLLECTOR TO EMITTER VOLTAGE (V)

FIGURE 15. CAPACITANCE vs COLLECTOR TO EMITTER

VOLTAGE

PDF page 5 diagram

ICE, COLLECTOR TO EMITTER CURRENT (A)

FIGURE 12. TURN OFF ENERGY LOSS vs COLLECTOR TO

EMITTER CURRENT

PDF page 5 diagram

VCE(PK), COLLECTOR TO EMITTER VOLTAGE (V)

FIGURE 14. SWITCHING SAFE OPERATING AREA

PDF page 5 diagram

0 10 20 30 40 50 60

Qg, GATE CHARGE (nC)

FIGURE 16. GATE CHARGE WAVEFORMS

Page 6

Typical Performance Curves (Continued)

PDF page 6 diagram

10-5

10-4

10-3

10-2

10-1

100

101

t1, RECTANGULAR PULSE DURATION (s)

FIGURE 17. IGBT NORMALIZED TRANSIENT THERMAL IMPEDANCE, JUNCTION TO CASE

PDF page 6 diagram

VEC, FORWARD VOLTAGE (V)

FIGURE 18. DIODE FORWARD CURRENT vs FORWARD

VOLTAGE DROP

Test Circuit and Waveform

PDF page 6 diagram

VDD = 480V

FIGURE 20. INDUCTIVE SWITCHING TEST CIRCUIT

PDF page 6 diagram

0 5 10 15 20

IEC, FORWARD CURRENT (A)

FIGURE 19. RECOVERY TIMES vs FORWARD CURRENT

PDF page 6 diagram

FIGURE 21. SWITCHING TEST WAVEFORMS

Page 7

Handling Precautions for IGBTs

Insulated Gate Bipolar Transistors are susceptible to gate-insulation damage by the electrostatic discharge of energy through the devices. When handling these devices, care should be exercised to assure that the static charge built in the handler’s body capacitance is not discharged through the device. With proper handling and application procedures, however, IGBTs are currently being extensively used in production by numerous equipment manufacturers in military, industrial and consumer applications, with virtually no damage problems due to electrostatic discharge. IGBTs can be handled safely if the following basic precautions are taken:

  1. Prior to assembly into a circuit, all leads should be kept shorted together either by the use of metal shorting springs or by the insertion into conductive material such as “ECCOSORBD LD26” or equivalent. 2. When devices are removed by hand from their carriers, the hand being used should be grounded by any suitable means, for example, with a metallic wristband. 3. Tips of soldering irons should be grounded. 4. Devices should never be inserted into or removed from circuits with power on. 5. Gate Voltage Rating - Never exceed the gate-voltage rating of VGEM. Exceeding the rated VGE can result in permanent damage to the oxide layer in the gate region. 6. Gate Termination - The gates of these devices are

essentially capacitors. Circuits that leave the gate open-circuited or floating should be avoided. These conditions can result in turn-on of the device due to voltage buildup on the input capacitor due to leakage currents or pickup. 7. Gate Protection - These devices do not have an internal monolithic Zener Diode from gate to emitter. If gate protection is required, an external Zener is recommended.

Operating Frequency Information

Operating frequency information for a typical device (Figure 13) is presented as a guide for estimating device performance for a specific application. Other typical frequency vs collector current (ICE) plots are possible using the information shown for a typical unit in Figures 4, 7, 8, 11 and 12. The operating frequency plot (Figure 13) of a typical device shows fMAX1 or fMAX2 whichever is smaller at each point. The information is based on measurements of a typical device and is bounded by the maximum rated junction temperature.

fMAX1 is defined by fMAX1 = 0.05/(tD(OFF)I + tD(ON)I). Deadtime (the denominator) has been arbitrarily held to 10% of the on-state time for a 50% duty factor. Other definitions are possible. tD(OFF)I and tD(ON)I are defined in Figure 21. Device turn-off delay can establish an additional frequency limiting condition for an application other than TJM. tD(OFF)I is important when controlling output ripple under a lightly loaded condition.

fMAX2 is defined by fMAX2 = (PD - PC)/(EOFF + EON). The allowable dissipation (PD) is defined by PD = (TJM - TC)/RθJC. The sum of device switching and conduction losses must not exceed PD. A 50% duty factor was used (Figure 13) and the conduction losses (PC) are approximated by PC = (VCE x ICE)/2. EON and EOFF are defined in the switching waveforms shown in Figure 21. EON is the integral of the instantaneous power loss (ICE x VCE) during turn-on and EOFF is the integral of the instantaneous power loss during turn-off. All tail losses are included in the calculation for EOFF; i.e., the collector current equals zero (ICE = 0).

Page 8

TRADEMARKS

The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.

FAST

ACEx™

FASTr™

Bottomless™

FRFET™

CoolFET™

GlobalOptoisolator™ POP™

CROSSVOLT™

GTO™

DenseTrench™

HiSeC™

DOME™

ISOPLANAR™

EcoSPARK™

LittleFET™

E2CMOSTM

QS™

MicroFET™

EnSignaTM

MicroPak™

FACT™

FACT Quiet Series™ MICROWIRE™

STAR\*POWER is used under license

DISCLAIMER

SMART START™ VCX™

OPTOLOGIC™

STAR\*POWER™

OPTOPLANAR™

Stealth™

PACMAN™

SuperSOT™-3

SuperSOT™-6

Power247™

SuperSOT™-8

PowerTrench

SyncFET™

QFET™

TinyLogic™

TruTranslation™

QT Optoelectronics™

UHC™

Quiet Series™

UltraFET

SILENT SWITCHER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.

PRODUCT STATUS DEFINITIONS

Definition of Terms

Datasheet Identification

Product Status

Advance Information

Formative or In Design

Preliminary

First Production

No Identification Needed

Full Production

Obsolete

Not In Production

  1. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.

Definition

This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.

This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.

This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.

This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.

Rev. H4