HGTG30N60C3D_V01 FAIRCHILD
Document overview
- PDF pages: 9
Technical content
Page 1
Data Sheet
63A, 600V, UFS Series N-Channel IGBT
with Anti-Parallel Hyperfast Diodes
The HGTG30N60C3D is a MOS gated high voltage switching device combining the best features of MOSFETs and bipolar transistors. The device has the high input impedance of a MOSFET and the low on-state conduction loss of a bipolar transistor. The much lower on-state voltage drop varies only moderately between 25oC and 150oC. The IGBT used is the development type TA49051. The diode used in anti-parallel with the IGBT is the development type TA49053.
The IGBT is ideal for many high voltage switching applications operating at moderate frequencies where low conduction losses are essential.
Formerly Developmental Type TA49014.
Ordering Information
| PART NUMBER | PACKAGE | BRAND |
|---|---|---|
| HGTG30N60C3D | TO-247 | G30N60C3D |
NOTE: When ordering, use the entire part number.
Symbol
C
G
E
January 2009
File Number 4041.2
Features
- 63A, 600V at TC = 25oC
- Typical Fall Time . . . . . . . . . . . . . . . 230ns at TJ = 150oC
- Short Circuit Rating
- Low Conduction Loss
- Hyperfast Anti-Parallel Diode
Packaging
JEDEC STYLE TO-247


Page 2
Absolute Maximum Ratings TC = 25oC, Unless Otherwise Specified
UNITS
600
V
Collector to Emitter Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BVCES Collector Current Continuous At TC = 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IC25
63
A
At TC = 110oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IC110
30
A
Average Diode Forward Current at 110oC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I(AVG)
25
A
252
A
Collector Current Pulsed (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ICM
±20
V
Gate to Emitter Voltage Continuous. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VGES
±30
V
Gate to Emitter Voltage Pulsed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGEM Switching Safe Operating Area at TJ = 150oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SSOA
60A at 600V
Power Dissipation Total at TC = 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD
208
W
Power Dissipation Derating TC > 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
W/oC
1.67
oC
Operating and Storage Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . TJ, TSTG
-40 to 150
oC
260
Maximum Lead Temperature for Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TL Short Circuit Withstand Time (Note 2) at VGE = 15V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .tSC
4
µs
Short Circuit Withstand Time (Note 2) at VGE = 10V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . tSC
15
µs
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES: 1. Repetitive Rating: Pulse width limited by maximum junction temperature. 2. VCE(PK) = 360V, TJ = 125oC, RG = 25Ω.
Electrical Specifications TC = 25oC, Unless Otherwise Specified
| PARAMETER | SYMBOL | TEST CONDITIONS | MIN | TYP | MAX | UNITS | |
|---|---|---|---|---|---|---|---|
| Collector to Emitter Breakdown Voltage | BVCES | IC = 250µA, VGE = 0V | 600 | - | - | V | |
| Emitter to Collector Breakdown Voltage | BVECS | IC = 10mA, VGE = 0V | 15 | 25 | - | V | |
| Collector to Emitter Leakage Current | ICES | VCE = BVCES | TC = 25oC | - | - | 250 | µA |
| VCE = BVCES | TC = 150oC | - | - | 3.0 | mA | ||
| Collector to Emitter Saturation Voltage | VCE(SAT) | IC = IC110, VGE = 15V | TC = 25oC | - | 1.5 | 1.8 | V |
| TC = 150oC | - | 1.7 | 2.0 | V | |||
| Gate to Emitter Threshold Voltage | VGE(TH) | IC = 250µA, VCE = VGE | TC = 25oC | 3.0 | 5.2 | 6.0 | V |
| Gate to Emitter Leakage Current | IGES | VGE = ±20V | - | - | ±100 | nA | |
| Switching SOA | SSOA | TJ = 150oC, VGE = 15V, RG = 3Ω, L = 100µH | VCE(PK) = 480V | 200 | - | - | A |
| VCE(PK) = 600V | 60 | - | - | A | |||
| Gate to Emitter Plateau Voltage | VGEP | IC = IC110, VCE = 0.5 BVCES | - | 8.1 | - | V | |
| On-State Gate Charge | QG(ON) | IC = IC110, VCE = 0.5 BVCES | VGE = 15V | - | 162 | 180 | nC |
| VGE = 20V | - | 216 | 250 | nC | |||
| Current Turn-On Delay Time | td(ON)I | TJ = 150oC, ICE = IC110, VCE(PK) = 0.8 BVCES, VGE = 15V, RG = 3Ω, L = 100µH | - | 40 | - | ns | |
| Current Rise Time | trI | - | 45 | - | ns | ||
| Current Turn-Off Delay Time | td(OFF)I | - | 320 | 400 | ns | ||
| Current Fall Time | tfI | - | 230 | 275 | ns | ||
| Turn-On Energy | EON | - | 1050 | - | µJ | ||
| Turn-Off Energy (Note 3) | EOFF | - | 2500 | - | µJ | ||
| Diode Forward Voltage | VEC | IEC = 30A | - | 1.75 | 2.2 | V | |
Page 3
Electrical Specifications TC = 25oC, Unless Otherwise Specified
| PARAMETER | SYMBOL | TEST CONDITIONS | MIN | TYP | MAX | UNITS |
|---|---|---|---|---|---|---|
| Diode Reverse Recovery Time | trr | IEC = 30A, dIEC/dt = 100A/µs | - | 52 | 60 | ns |
| IEC = 1.0A, dIEC/dt = 100A/µs | - | 42 | 50 | ns | ||
| Thermal Resistance | RθJC | IGBT | - | - | 0.6 | oC/W |
| Diode | - | - | 1.3 | oC/W |
NOTE: 3. Turn-Off Energy Loss (EOFF) is defined as the integral of the instantaneous power loss starting at the trailing edge of the input pulse and ending at the point where the collector current equals zero (ICE = 0A). The HGTG30N60C3D was tested per JEDEC standard No. 24-1 Method for Measurement of Power Device Turn-Off Switching Loss. This test method produces the true total Turn-Off Energy Loss. Turn-On losses include diode losses.
Typical Performance Curves

VGE, GATE TO EMITTER VOLTAGE (V)
FIGURE 1. TRANSFER CHARACTERISTICS

VCE, COLLECTOR TO EMITTER VOLTAGE (V)
FIGURE 3. COLLECTOR TO EMITTER ON-STATE VOLTAGE
PULSE DURATION = 250µs, DUTY CYCLE <0.5%, TC = 25oC

VCE, COLLECTOR TO EMITTER VOLTAGE (V)
FIGURE 2. SATURATION CHARACTERISTICS

VCE, COLLECTOR TO EMITTER VOLTAGE (V)
FIGURE 4. COLLECTOR TO EMITTER ON-STATE VOLTAGE
Page 4
Typical Performance Curves (Continued)

TC, CASE TEMPERATURE (oC)
FIGURE 5. MAX. DC COLLECTOR CURRENT vs CASE
TEMPERATURE

ICE, COLLECTOR TO EMITTER CURRENT (A)
FIGURE 7. TURN-ON DELAY TIME vs COLLECTOR TO
EMITTER CURRENT

ICE, COLLECTOR TO EMITTER CURRENT (A)
FIGURE 9. TURN-ON RISE TIME vs COLLECTOR TO
EMITTER CURRENT

VGE, GATE TO EMITTER VOLTAGE (V)
FIGURE 6. SHORT CIRCUIT WITHSTAND TIME

ICE, COLLECTOR TO EMITTER CURRENT (A)
FIGURE 8. TURN-OFF DELAY TIME vs COLLECTOR TO
EMITTER CURRENT

ICE, COLLECTOR TO EMITTER CURRENT (A)
FIGURE 10. TURN-OFF FALL TIME vs COLLECTOR TO
EMITTER CURRENT
Page 5
Typical Performance Curves (Continued)

ICE, COLLECTOR TO EMITTER CURRENT (A)
FIGURE 11. TURN-ON ENERGY LOSS vs COLLECTOR TO
EMITTER CURRENT

ICE, COLLECTOR TO EMITTER CURRENT (A)
FIGURE 13. OPERATING FREQUENCY vs COLLECTOR TO
EMITTER CURRENT

VCE, COLLECTOR TO EMITTER VOLTAGE (V)
FIGURE 15. CAPACITANCE vs COLLECTOR TO EMITTER
VOLTAGE

ICE, COLLECTOR TO EMITTER CURRENT (A)
FIGURE 12. TURN-OFF ENERGY LOSS vs COLLECTOR TO
EMITTER CURRENT

VCE, COLLECTOR TO EMITTER VOLTAGE (V)
FIGURE 14. SWITCHING SAFE OPERATING AREA
IG (REF) = 3.54mA, RL = 20Ω, TC = 25oC

QG, GATE CHARGE (nC)
FIGURE 16. GATE CHARGE WAVEFORMS
Page 6
Typical Performance Curves (continued)


10-5
10-4
10-3
10-2
10-1
101
100
t1, RECTANGULAR PULSE DURATION (s)
Figure 18. IGBT NORMALIZED TRANSIENT THERMAL IMPEDANCE, JUNCTION TO CASE
Page 7
Typical Performance Curves (continued)

VEC, FORWARD VOLTAGE (V)
Figure 19. DIODE FORWARD CURRENT vs FORWARD
VOLTAGE DROP
Test Circuit and Waveforms

VDD = 480V
Figure 21. INDUCTIVE SWITCHING TEST CIRCUIT

IEC, FORWARD CURRENT (A)
Figure 20. RECOVERY TIME vs FORWARD CURRENT
| 90% 10% | ||
| EOFF 90% 10% td(OFF)I tfI | EON trI t | |
VGE
VCE
ICE
td(ON)I
Figure 22. SWITCHING TEST WAVEFORMS
Page 8
Handling Precautions for IGBTs
Insulated Gate Bipolar Transistors are susceptible to gateinsulation damage by the electrostatic discharge of energy through the devices. When handling these devices, care should be exercised to assure that the static charge built in the handler’s body capacitance is not discharged through the device. With proper handling and application procedures, however, IGBTs are currently being extensively used in production by numerous equipment manufacturers in military, industrial and consumer applications, with virtually no damage problems due to electrostatic discharge. IGBTs can be handled safely if the following basic precautions are taken:
- Prior to assembly into a circuit, all leads should be kept shorted together either by the use of metal shorting springs or by the insertion into conductive material such as “ECCOSORBD™ LD26” or equivalent. 2. When devices are removed by hand from their carriers, the hand being used should be grounded by any suitable means - for example, with a metallic wristband. 3. Tips of soldering irons should be grounded. 4. Devices should never be inserted into or removed from circuits with power on. 5. Gate Voltage Rating - Never exceed the gate-voltage rating of VGEM. Exceeding the rated VGE can result in permanent damage to the oxide layer in the gate region. 6. Gate Termination - The gates of these devices are
essentially capacitors. Circuits that leave the gate open-circuited or floating should be avoided. These conditions can result in turn-on of the device due to voltage buildup on the input capacitor due to leakage currents or pickup. 7. Gate Protection - These devices do not have an internal monolithic zener diode from gate to emitter. If gate protection is required an external zener is recommended.
Operating Frequency Information
Operating frequency information for a typical device (Figure 13) is presented as a guide for estimating device performance for a specific application. Other typical frequency vs collector current (ICE) plots are possible using the information shown for a typical unit in Figures 4, 7, 8, 11 and 12. The operating frequency plot (Figure 13) of a typical device shows fMAX1 or fMAX2 whichever is smaller at each point. The information is based on measurements of a typical device and is bounded by the maximum rated junction temperature.
fMAX1 is defined by fMAX1 = 0.05/(tD(OFF)I + tD(ON)I). Deadtime (the denominator) has been arbitrarily held to 10% of the on-state time for a 50% duty factor. Other definitions are possible. tD(OFF)I and tD(ON)I are defined in Figure 21. Device turn-off delay can establish an additional frequency limiting condition for an application other than TJM. tD(OFF)I is important when controlling output ripple under a lightly loaded condition.
fMAX2 is defined by fMAX2 = (PD - PC)/(EOFF + EON). The allowable dissipation (PD) is defined by PD = (TJM - TC)/RθJC. The sum of device switching and conduction losses must not exceed PD. A 50% duty factor was used (Figure 13) and the conduction losses (PC) are approximated by PC = (VCE x ICE)/2. EON and EOFF are defined in the switching waveforms shown in Figure 21. EON is the integral of the instantaneous power loss (ICE x VCE) during turn-on and EOFF is the integral of the instantaneous power loss during turn-off. All tail losses are included in the calculation for EOFF; i.e. the collector current equals zero (ICE = 0).
Page 9

PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
LITERATURE FULFILLMENT:
ON Semiconductor Website: www.onsemi.com
Literature Distribution Center for ON Semiconductor
USA/Canada Europe, Middle East and Africa Technical Support:
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Phone: 421 33 790 2910
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Japan Customer Focus Center
Email: orderlit@onsemi.com
Phone: 81−3−5817−1050
© Semiconductor Components Industries, LLC
www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local Sales Representative