HGTG20N60C3R FAIRCHILD
Document overview
- PDF pages: 6
Technical content
Page 1
HGTG20N60C3R, HGTP20N60C3R,
HGT1S20N60C3R, HGT1S20N60C3RS
S E M I C O N D U C T O R
40A, 600V, Rugged UFS Series N-Channel IGBTs
January 1997
Features
- 40A, 600V TJ = 25oC
- 600V Switching SOA Capability
- Typical Fall Time at TJ = 150oC . . . . . . . . . . . . . 330ns
- Short Circuit Rating at TJ = 150oC . . . . . . . . . . . . . 10µs
- Low Conduction Loss
Ordering Information
| PART NUMBER | PACKAGE | BRAND |
|---|---|---|
| HGTP20N60C3R | TO-220AB | 20N60C3R |
| HGTG20N60C3R | TO-247 | 20N60C3R |
| HGT1S20N60C3R | TO-262AA | 20N60C3R |
| HGT1S20N60C3RS | TO-263AB | 20N60C3R |
NOTE: When ordering, use the entire part number. Add the suffix 9A to obtain the TO-263AB variant in the tape and reel, i.e., HGT1S20N60C3RS9A.
Packaging
JEDEC STYLE TO-247
E C G
COLLECTOR
(FLANGE)
JEDEC TO-263AB
COLLECTOR
(FLANGE)
G E
Description
This family of IGBTs was designed for optimum performance in the demanding world of motor control operation as well as other high voltage switching applications. These devices demonstrate RUGGED performance capability when subjected to harsh SHORT CIRCUIT WITHSTAND TIME (SCWT) conditions. The parts have ULTRAFAST (UFS) switching speed while the on-state conduction losses have been kept at a low level. The electrical specifications include typical Turn-On and Turn-Off dv/dt ratings. These ratings and the Turn-On ratings include the effect of the diode in the test circuit (Figure 16). The data was obtained with the diode at the same TJ as the IGBT under test.
Formerly Developmental Type TA49047.
Terminal Diagram
N-CHANNEL ENHANCEMENT MODE
C
G
E
JEDEC TO-220AB (ALTERNATE VERSION)
E C G
COLLECTOR
(FLANGE)
JEDEC TO-262AA
E C G
COLLECTOR
(FLANGE)
HARRIS SEMICONDUCTOR IGBT PRODUCT IS COVERED BY ONE OR MORE OF THE FOLLOWING U.S. PATENTS:
4,364,073
4,417,385
4,430,792
4,443,931
4,466,176
4,516,143
4,532,534
4,567,641
4,587,713
4,598,461
4,605,948
4,618,872
4,620,211
4,631,564
4,639,754
4,639,762
4,641,162
4,644,637
4,682,195
4,684,413
4,694,313
4,717,679
4,743,952
4,783,690
4,794,432
4,801,986
4,803,533
4,809,045
4,809,047
4,810,665
4,823,176
4,837,606
4,860,080
4,883,767
4,888,627
4,890,143
4,901,127
4,904,609
4,933,740
4,963,951
4,969,027
CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper ESD Handling Procedures.
File Number 4226.1
Copyright © Harris Corporation 1997
5-3
Page 2
Absolute Maximum Ratings TC = 25oC, Unless Otherwise Specified
ALL TYPES
UNITS
600
V
Collector-Emitter Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BVCES Collector Current Continuous At TC = 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IC25
40
A
At TC = 110oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IC110
20
A
80
A
Collector Current Pulsed (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ICM
±20
V
Gate-Emitter Voltage Continuous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGES
±30
V
Gate-Emitter Voltage Pulsed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGEM Switching Safe Operating Area at TJ = 150oC, Fig. 12 . . . . . . . . . . . . . . . . . . . . . .SSOA
80A at 600V
Power Dissipation Total at TC = 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD
164
W
Power Dissipation Derating TC > 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
W/oC
1.32 100
mJ
Reverse Voltage Avalanche Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EARV
oC
Operating and Storage Junction Temperature Range . . . . . . . . . . . . . . . . . . . . TJ, TSTG
-40 to 150
oC
260
Maximum Lead Temperature for Soldering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TL Short Circuit Withstand Time (Note 2) at VGE = 15V . . . . . . . . . . . . . . . . . . . . . . . . . . tSC
10
µs
NOTES: 1. Pulse width limited by maximum junction temperature. 2. VCE(PK) = 440V, TJ = 150oC, RGE = 10Ω.
Electrical Specifications TC = 25oC, Unless Otherwise Specified
| PARAMETER | SYMBOL | TEST CONDITIONS | MIN | TYP | MAX | UNITS | |
|---|---|---|---|---|---|---|---|
| Collector-Emitter Breakdown Voltage | BVCES | IC = 250µA, VGE = 0V | 600 | - | - | V | |
| Emitter-Collector Breakdown Voltage | BVECS | IC = 10mA, VGE = 0V | 15 | - | - | V | |
| Collector-Emitter Leakage Current | ICES | VCE = BVCES | TC = 25oC | - | - | 250 | µA |
| VCE = BVCES | TC = 150oC | - | - | 3.0 | mA | ||
| Collector-Emitter Saturation Voltage | VCE(SAT) | IC = IC110, VGE = 15V | TC = 25oC | - | 1.8 | 2.2 | V |
| TC = 150oC | - | 2.1 | 2.5 | V | |||
| Gate-Emitter Threshold Voltage | VGE(TH) | IC = 250µA, VCE = VGE | TC = 25oC | 3.5 | 6.3 | 7.5 | V |
| Gate-Emitter Leakage Current | IGES | VGE = ±20V | - | - | ±100 | nA | |
| Switching SOA (See Figure 12) | SSOA | TJ = 150oC RG = 10Ω VGE = 15V | VCE(PK) = 600V L = 1mH | 80 | - | - | A |
| Gate-Emitter Plateau Voltage | VGEP | IC = IC110, VCE = 0.5 BVCES | - | 9.0 | - | V | |
| On-State Gate Charge | QG(ON) | IC = IC110, VCE = 0.5 BVES | VGE = 15V | - | 87 | 110 | nC |
| VGE = 20V | - | 116 | 150 | nC | |||
| Current Turn-On Delay Time | tD(ON)I | TJ = 150oC ICE = IC110 VCE(PK) = 0.8 BVCES VGE = 15V RG = 10Ω L = 1mH Diode used in test circuit RURP1560 at 150oC | - | 34 | - | ns | |
| Current Rise Time | tRI | - | 40 | - | ns | ||
| Current Turn-Off Delay Time | tD(OFF)I | - | 390 | 500 | ns | ||
| Current Fall Time | tFI | - | 330 | 400 | ns | ||
| Turn-Off Voltage dv/dt (Note 3) | dVCE/dt | - | 1.3 | - | V/ns | ||
| Turn-On Voltage dv/dt (Note 3) | dVCE/dt | - | 7.0 | - | V/ns | ||
| Turn-On Energy (Note 4) | EON | - | 2.3 | - | mJ | ||
| Turn-Off Energy (Note 5) | EOFF | - | 3.0 | - | mJ | ||
| Thermal Resistance | RθJC | - | - | 0.76 | oC/W | ||
NOTES: 3. dVCE/dt depends on the diode used and the temperature of the diode. 4. Turn-On Energy Loss (EON) includes diode losses and is defined as the integral of the instantaneous power loss starting at the leading edge of the input pulse and ending at the point where the collector voltage equals VCE(ON). This value of EON was obtained with a RURP1560 diode at TJ = 150oC. A different diode or temperature will result in a different EON. For example with diode at TJ = 25oC EON is about one half the value at 150oC. 5. Turn-Off Energy Loss (EOFF) is defined as the integral of the instantaneous power loss starting at the trailing edge of the input pulse and
ending at the point where the collector current equals zero (ICE = 0A). All devices were tested per JEDEC standard No. 24-1 Method for Measurement of Power Device Turn-Off Switching Loss. This test method produces the true total Turn-Off Energy Loss.
5-4
Page 3

Page 4

Page 5

Page 6
Handling Precautions for IGBTs
Insulated Gate Bipolar Transistors are susceptible to gateinsulation damage by the electrostatic discharge of energy through the devices. When handling these devices, care should be exercised to assure that the static charge built in the handler’s body capacitance is not discharged through the device. With proper handling and application procedures, however, IGBTs are currently being extensively used in production by numerous equipment manufacturers in military, industrial and consumer applications, with virtually no damage problems due to electrostatic discharge. IGBT’s can be handled safely if the following basic precautions are taken: 1. Prior to assembly into a circuit, all leads should be kept
shorted together either by the use of metal shorting springs or by the insertion into conductive material such as “ECCOSORBD LD26” or equivalent. 2. When devices are removed by hand from their carriers, the hand being used should be grounded by any suitable means - for example, with a metallic wristband. 3. Tips of soldering irons should be grounded. 4. Devices should never be inserted into or removed from circuits with power on. 5. Gate Voltage Rating - Never exceed the gate-voltage rating of VGEM. Exceeding the rated VGE can result in permanent damage to the oxide layer in the gate region. 6. Gate Termination - The gates of these devices are essentially capacitors. Circuits that leave the gate open-
circuited or floating should be avoided. These conditions can result in turn-on of the device due to voltage buildup on the input capacitor due to leakage currents or pickup. 7. Gate Protection - These devices do not have an internal monolithic zener diode from gate to emitter. If gate protection is required an external zener is recommended.
ECCOSORBD is a Trademark of Emerson and Cumming, Inc.
Operating Frequency Information
Operating frequency information for a typical device (Figure 11) is presented as a guide for estimating device performance for a specific application. Other typical frequency vs collector current (ICE) plots are possible using the information shown for a typical unit in Figures 3, 5, 6, 9 and 10. The operating frequency plot (Figure 11) of a typical device shows fMAX1 or fMAX2 whichever is smaller at each point. The information is based on measurements of a typical device and is bounded by the maximum rated junction temperature. fMAX1 is defined by fMAX1 = 0.05/(tD(OFF)I+ tD(ON)I). Deadtime (the denominator) has been arbitrarily held to 10% of the on- state time for a 50% duty factor. Other definitions are
possible. tD(OFF)I and tD(ON)I are defined in Figure 17. Device turn-off delay can establish an additional frequency limiting condition for an application other than TJMAX. tD(OFF)I is important when controlling output ripple under a lightly loaded condition. fMAX2 is defined by fMAX2 = (PD - PC)/(EOFF + EON). The allowable dissipation (PD) is defined by PD = (TJMAX - TC)/RθJC. The sum of device switching and conduction losses must not exceed PD. A 50% duty factor was used (Figure 11) and the conduction losses (PC) are approximated by PC = (VCE x ICE)/2. EON and EOFF are defined in the switching waveforms shown in Figure 17. EON is the integral of the instantaneous
power loss (ICE x VCE) during turn-on and EOFF is the integral of the instantaneous power loss (ICE x VCE) during turnoff. All tail losses are included in the calculation for EOFF; i.e. the collector current equals zero (ICE = 0).
All Harris Semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Harris Semiconductor products are sold by description only. Harris Semiconductor reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Harris is believed to be accurate and reliable. However, no responsibility is assumed by Harris or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Harris or its subsidiaries.
Sales Office Headquarters
For general information regarding Harris Semiconductor and its products, call 1-800-4-HARRIS
NORTH AMERICA
EUROPE
Harris Semiconductor
Harris Semiconductor
P. O. Box 883, Mail Stop 53-210
Mercure Center
Melbourne, FL 32902
100, Rue de la Fusee
TEL: 1-800-442-7747
1130 Brussels, Belgium
(407) 729-4984
TEL: (32) 2.724.2111
FAX: (407) 729-5321
FAX: (32) 2.724.22.05
ASIA
Harris Semiconductor PTE Ltd. No. 1 Tannery Road Cencon 1, #09-01 Singapore 1334 TEL: (65) 748-4200 FAX: (65) 748-0400
S E M I C O N D U C T O R
5-8