HGTG11N120CN FAIRCHILD

Document overview

  • PDF pages: 7

Technical content

Page 1

Data Sheet

43A, 1200V, NPT Series N-Channel IGBT

The HGTG11N120CN, HGTP11N120CN, and HGT1S11N120CNS are Non-Punch Through (NPT) IGBT designs. They are new members of the MOS gated high voltage switching IGBT family. IGBTs combine the best features of MOSFETs and bipolar transistors. This device has the high input impedance of a MOSFET and the low on- state conduction loss of a bipolar transistor.

The IGBT is ideal for many high voltage switching applications operating at moderate frequencies where low conduction losses are essential, such as: AC and DC motor controls, power supplies and drivers for solenoids, relays and contactors.

Formerly Developmental Type TA49291.

Ordering Information

PART NUMBER PACKAGE BRAND
HGTG11N120CN TO-247 G11N120CN
HGTP11N120CN TO-220AB 11N120CN
HGT1S11N120CNS TO-263AB 11N120CN

NOTE: When ordering, use the entire part number. Add the suffix 9A to obtain the TO-263AB variant in Tape and Reel, i.e., HGT1S11N120CNS9A.

Symbol

C

G

E

HGTG11N120CN, HGTP11N120CN,

HGT1S11N120CNS

December 2001

Features

  • 43A, 1200V, TC = 25oC
  • 1200V Switching SOA Capability
  • Typical Fall Time. . . . . . . . . . . . . . . . 340ns at TJ = 150oC
  • Short Circuit Rating
  • Low Conduction Loss
  • Avalanche Rated
  • Thermal Impedance SPICE Model Temperature Compensating SABER™ Model www.fairchildsemi.com
  • Related Literature - TB334 “Guidelines for Soldering Surface Mount Components to PC Boards”

Packaging

JEDEC STYLE TO-247

E

PDF page 1 diagram

JEDEC TO-220AB (ALTERNATE VERSION)

PDF page 1 diagram

COLLECTOR

E

(FLANGE)

C

JEDEC TO-263AB

COLLECTOR

(FLANGE)

G

E

FAIRCHILD SEMICONDUCTOR IGBT PRODUCT IS COVERED BY ONE OR MORE OF THE FOLLOWING U.S. PATENTS

4,364,073

4,417,385

4,430,792

4,443,931

4,466,176

4,516,143

4,532,534

4,587,713

4,598,461

4,605,948

4,620,211

4,631,564

4,639,754

4,639,762

4,641,162

4,644,637

4,682,195

4,684,413

4,694,313

4,717,679

4,743,952

4,783,690

4,794,432

4,801,986

4,803,533

4,809,045

4,809,047

4,810,665

4,823,176

4,837,606

4,860,080

4,883,767

4,888,627

4,890,143

4,901,127

4,904,609

4,933,740

4,963,951

4,969,027

Page 2

Absolute Maximum Ratings TC = 25oC, Unless Otherwise Specified

HGTG11N120CN

HGTP11N120CN

HGT1S11N120CNS

UNITS

1200

V

Collector to Emitter Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BVCES Collector Current Continuous At TC = 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IC25

43

A

At TC = 110oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IC110

22

A

Collector Current Pulsed (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ICM

80

A

±20

V

Gate to Emitter Voltage Continuous. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGES

±30

V

Gate to Emitter Voltage Pulsed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGEM Switching Safe Operating Area at TJ = 150oC (Figure 2) . . . . . . . . . . . . . . . . . . . . . . . SSOA

55A at 1200V

Power Dissipation Total at TC = 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD

298

W

Power Dissipation Derating TC > 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

W/oC

2.38 80

mJ

Forward Voltage Avalanche Energy (Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EAV

oC

Operating and Storage Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . TJ, TSTG

-55 to 150

Maximum Lead Temperature for Soldering

oC

300

Leads at 0.063in (1.6mm) from case for 10s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TL

oC

260

Package Body for 10s, see Tech brief 334. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tpkg Short Circuit Withstand Time (Note 3) at VGE = 15V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . tSC

8

µs

Short Circuit Withstand Time (Note 3) at VGE = 12V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . tSC

15

µs

CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

NOTES: 1. Pulse width limited by maximum junction temperature. 2. ICE = 20A, L = 400µH, TJ = 25oC. 3. VCE(PK) = 840V, TJ = 125oC, RG = 10Ω.

Electrical Specifications TC = 25oC, Unless Otherwise Specified

PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNITS
Collector to Emitter Breakdown Voltage BVCES IC = 250µA, VGE = 0V 1200 - - V
Emitter to Collector Breakdown Voltage BVECS IC = 10mA, VGE = 0V 15 - - V
Collector to Emitter Leakage Current ICES VCE = 1200V TC = 25oC - - 250 µA
TC = 125oC - 250 - µA
TC = 150oC - - 3 mA
Collector to Emitter Saturation Voltage VCE(SAT) IC = 11A, VGE = 15V TC = 25oC - 2.1 2.4 V
TC = 150oC - 2.8 3.5 V
Gate to Emitter Threshold Voltage VGE(TH) IC = 90µA, VCE = VGE 6.0 6.8 - V
Gate to Emitter Leakage Current IGES VGE = ±20V - - ±250 nA
Switching SOA SSOA TJ = 150oC, RG = 10Ω, VGE = 15V, L = 400µH, VCE(PK) = 1200V 55 - - A
Gate to Emitter Plateau Voltage VGEP IC = 11A, VCE = 600V - 10.4 - V
On-State Gate Charge QG(ON) IC = 11A, VCE = 600V VGE = 15V - 100 120 nC
VGE = 20V - 130 150 nC

Page 3

Electrical Specifications TC = 25oC, Unless Otherwise Specified (Continued)

PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNITS
Current Turn-On Delay Time td(ON)I IGBT and Diode at TJ = 25oC ICE = 11A VCE = 960V VGE = 15V RG = 10Ω L = 2mH Test Circuit (Figure 18) - 23 26 ns
Current Rise Time trI - 12 16 ns
Current Turn-Off Delay Time td(OFF)I - 180 240 ns
Current Fall Time tfI - 190 230 ns
Turn-On Energy (Note 4) EON1 - 0.4 0.5 mJ
Turn-On Energy (Note 4) EON2 - 0.95 1.3 mJ
Turn-Off Energy (Note 5) EOFF - 1.3 1.6 mJ
Current Turn-On Delay Time td(ON)I IGBT and Diode at TJ = 150oC ICE = 11A VCE = 960V VGE = 15V RG = 10Ω L = 2mH Test Circuit (Figure 18) - 21 24 ns
Current Rise Time trI - 12 16 ns
Current Turn-Off Delay Time td(OFF)I - 210 280 ns
Current Fall Time tfI - 340 400 ns
Turn-On Energy (Note 4) EON1 - 0.45 0.6 mJ
Turn-On Energy (Note 4) EON2 - 1.9 2.5 mJ
Turn-Off Energy (Note 5) EOFF - 2.1 2.5 mJ
Thermal Resistance Junction To Case RθJC - - 0.42 oC/W

NOTES: 4. Values for two Turn-On loss conditions are shown for the convenience of the circuit designer. EON1 is the turn-on loss of the IGBT only. EON2 is the turn-on loss when a typical diode is used in the test circuit and the diode is at the same TJ as the IGBT. The diode type is specified in Figure 18. 5. Turn-Off Energy Loss (EOFF) is defined as the integral of the instantaneous power loss starting at the trailing edge of the input pulse and ending at the point where the collector current equals zero (ICE = 0A). All devices were tested per JEDEC Standard No. 24-1 Method for Measurement of Power Device Turn-Off Switching Loss. This test method produces the true total Turn-Off Energy Loss.

Typical Performance Curves Unless Otherwise Specified

PDF page 3 diagram

TC, CASE TEMPERATURE (oC)

FIGURE 1. DC COLLECTOR CURRENT vs CASE

TEMPERATURE

PDF page 3 diagram

VCE, COLLECTOR TO EMITTER VOLTAGE (V)

FIGURE 2. MINIMUM SWITCHING SAFE OPERATING AREA

Page 4

Typical Performance Curves Unless Otherwise Specified (Continued)

PDF page 4 diagram
PDF page 4 diagram

ICE, COLLECTOR TO EMITTER CURRENT (A)

VGE, GATE TO EMITTER VOLTAGE (V)

FIGURE 3. OPERATING FREQUENCY vs COLLECTOR TO

FIGURE 4. SHORT CIRCUIT WITHSTAND TIME

EMITTER CURRENT

PDF page 4 diagram
PDF page 4 diagram

VCE, COLLECTOR TO EMITTER VOLTAGE (V)

VCE, COLLECTOR TO EMITTER VOLTAGE (V)

FIGURE 6. COLLECTOR TO EMITTER ON-STATE VOLTAGE

FIGURE 5. COLLECTOR TO EMITTER ON-STATE VOLTAGE

PDF page 4 diagram
PDF page 4 diagram

0

5 10

20

15

ICE, COLLECTOR TO EMITTER CURRENT (A)

ICE, COLLECTOR TO EMITTER CURRENT (A)

FIGURE 8. TURN-OFF ENERGY LOSS vs COLLECTOR TO

FIGURE 7. TURN-ON ENERGY LOSS vs COLLECTOR TO

EMITTER CURRENT

EMITTER CURRENT

Page 5

Typical Performance Curves Unless Otherwise Specified (Continued)

PDF page 5 diagram
PDF page 5 diagram

10

0

15

20

5

ICE, COLLECTOR TO EMITTER CURRENT (A)

ICE, COLLECTOR TO EMITTER CURRENT (A)

FIGURE 10. TURN-ON RISE TIME vs COLLECTOR TO

FIGURE 9. TURN-ON DELAY TIME vs COLLECTOR TO

EMITTER CURRENT

EMITTER CURRENT

PDF page 5 diagram
PDF page 5 diagram

ICE, COLLECTOR TO EMITTER CURRENT (A)

ICE, COLLECTOR TO EMITTER CURRENT (A)

FIGURE 12. FALL vs COLLECTOR TO EMITTER CURRENT

FIGURE 11. TURN-OFF DELAY TIME vs COLLECTOR TO

EMITTER CURRENT

PDF page 5 diagram
PDF page 5 diagram

VGE, GATE TO EMITTER VOLTAGE (V)

QG, GATE CHARGE (nC)

FIGURE 13. TRANSFER CHARACTERISTIC

FIGURE 14. GATE CHARGE WAVEFORMS

Page 6

Typical Performance Curves Unless Otherwise Specified (Continued)

PDF page 6 diagram

VCE, COLLECTOR TO EMITTER VOLTAGE (V)

FIGURE 15. CAPACITANCE vs COLLECTOR TO EMITTER

VOLTAGE

PDF page 6 diagram

VCE, COLLECTOR TO EMITTER VOLTAGE (V)

FIGURE 16. COLLECTOR TO EMITTER ON-STATE VOLTAGE

PDF page 6 diagram

t1, RECTANGULAR PULSE DURATION (s)

FIGURE 17. NORMALIZED TRANSIENT THERMAL RESPONSE, JUNCTION TO CASE

Test Circuit and Waveforms

PDF page 6 diagram
PDF page 6 diagram

VDD = 960V

FIGURE 18. INDUCTIVE SWITCHING TEST CIRCUIT

FIGURE 19. SWITCHING TEST WAVEFORMS

Page 7

Handling Precautions for IGBTs

Insulated Gate Bipolar Transistors are susceptible to gate-insulation damage by the electrostatic discharge of energy through the devices. When handling these devices, care should be exercised to assure that the static charge built in the handler’s body capacitance is not discharged through the device. With proper handling and application procedures, however, IGBTs are currently being extensively used in production by numerous equipment manufacturers in military, industrial and consumer applications, with virtually no damage problems due to electrostatic discharge. IGBTs can be handled safely if the following basic precautions are taken:

  1. Prior to assembly into a circuit, all leads should be kept shorted together either by the use of metal shorting springs or by the insertion into conductive material such as “ECCOSORBD™ LD26” or equivalent. 2. When devices are removed by hand from their carriers, the hand being used should be grounded by any suitable means - for example, with a metallic wristband. 3. Tips of soldering irons should be grounded. 4. Devices should never be inserted into or removed from circuits with power on. 5. Gate Voltage Rating - Never exceed the gate-voltage rating of VGEM. Exceeding the rated VGE can result in permanent damage to the oxide layer in the gate region. 6. Gate Termination - The gates of these devices are

essentially capacitors. Circuits that leave the gate open-circuited or floating should be avoided. These conditions can result in turn-on of the device due to voltage buildup on the input capacitor due to leakage currents or pickup. 7. Gate Protection - These devices do not have an internal monolithic Zener diode from gate to emitter. If gate protection is required an external Zener is recommended.

Operating Frequency Information

Operating frequency information for a typical device (Figure 3) is presented as a guide for estimating device performance for a specific application. Other typical frequency vs collector current (ICE) plots are possible using the information shown for a typical unit in Figures 5, 6, 7, 8, 9 and 11. The operating frequency plot (Figure 3) of a typical device shows fMAX1 or fMAX2; whichever is smaller at each point. The information is based on measurements of a typical device and is bounded by the maximum rated junction temperature.

fMAX1 is defined by fMAX1 = 0.05/(td(OFF)I+ td(ON)I). Deadtime (the denominator) has been arbitrarily held to 10% of the on-state time for a 50% duty factor. Other definitions are possible. td(OFF)I and td(ON)I are defined in Figure 19. Device turn-off delay can establish an additional frequency limiting condition for an application other than TJM. td(OFF)I is important when controlling output ripple under a lightly loaded condition.

fMAX2 is defined by fMAX2 = (PD - PC)/(EOFF + EON2). The allowable dissipation (PD) is defined by PD = (TJM - TC)/RθJC. The sum of device switching and conduction losses must not exceed PD. A 50% duty factor was used (Figure 3) and the conduction losses (PC) are approximated by PC = (VCE x ICE)/2. EON2 and EOFF are defined in the switching waveforms shown in Figure 19. EON2 is the integral of the instantaneous power loss (ICE x VCE) during turn-on and EOFF is the integral of the instantaneous power loss (ICE x VCE) during turn-off. All tail losses are included in the calculation for EOFF; i.e., the collector current equals zero (ICE = 0).