HGTG10N120BND FAIRCHILD

Document overview

  • PDF pages: 8

Technical content

Page 1

Data Sheet

35A, 1200V, NPT Series N-Channel IGBT

with Anti-Parallel Hyperfast Diode

The HGTG10N120BND is a Non-Punch Through (NPT) IGBT design. This is a new member of the MOS gated high voltage switching IGBT family. IGBTs combine the best features of MOSFETs and bipolar transistors. This device has the high input impedance of a MOSFET and the low on- state conduction loss of a bipolar transistor. The IGBT used is the development type TA49290. The Diode used is the development type TA49189.

The IGBT is ideal for many high voltage switching applications operating at moderate frequencies where low conduction losses are essential, such as: AC and DC motor controls, power supplies and drivers for solenoids, relays and contactors.

Formerly Developmental Type TA49302.

Ordering Information

PART NUMBER PACKAGE BRAND
HGTG10N120BND TO-247 10N120BND

NOTE: When ordering, use the entire part number.

December 2001

Features

  • 35A, 1200V, TC = 25oC
  • 1200V Switching SOA Capability
  • Typical Fall Time. . . . . . . . . . . . . . . . 140ns at TJ = 150oC
  • Short Circuit Rating
  • Low Conduction Loss

Packaging

JEDEC STYLE TO-247

E C G

Symbol

C

G

E

FAIRCHILD SEMICONDUCTOR IGBT PRODUCT IS COVERED BY ONE OR MORE OF THE FOLLOWING U.S. PATENTS

4,364,073

4,417,385

4,430,792

4,443,931

4,466,176

4,516,143

4,532,534

4,587,713

4,598,461

4,605,948

4,620,211

4,631,564

4,639,754

4,639,762

4,641,162

4,644,637

4,682,195

4,684,413

4,694,313

4,717,679

4,743,952

4,783,690

4,794,432

4,801,986

4,803,533

4,809,045

4,809,047

4,810,665

4,823,176

4,837,606

4,860,080

4,883,767

4,888,627

4,890,143

4,901,127

4,904,609

4,933,740

4,963,951

4,969,027

Page 2

Absolute Maximum Ratings TC = 25oC, Unless Otherwise Specified HGTG10N120BND UNITS Collector to Emitter Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BVCES 1200 V Collector Current Continuous At TC = 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IC25 35 A At TC = 110oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IC110 17 A Collector Current Pulsed (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ICM 80 A Gate to Emitter Voltage Continuous. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGES ±20 V Gate to Emitter Voltage Pulsed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VGEM ±30 V Switching Safe Operating Area at TJ = 150oC (Figure 2) . . . . . . . . . . . . . . . . . . . . . . . SSOA 55A at 1200V Power Dissipation Total at TC = 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD 298 W Power Dissipation Derating TC > 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.38 W/oC Operating and Storage Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . TJ, TSTG -55 to 150 oC Maximum Lead Temperature for Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TL 260 oC Short Circuit Withstand Time (Note 2) at VGE = 15V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .tSC 8 µs Short Circuit Withstand Time (Note 2) at VGE = 12V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .tSC 15 µs CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTES: 1. Pulse width limited by maximum junction temperature. 2. VCE(PK) = 840V, TJ = 125oC, RG = 10Ω.
Electrical Specifications TC = 25oC, Unless Otherwise Specified
PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNITS
Collector to Emitter Breakdown Voltage BVCES IC = 250µA, VGE = 0V 1200 - - V
Collector to Emitter Leakage Current ICES VCE = 1200V TC = 25oC - - 250 µA
TC = 125oC - 170 - µA
TC = 150oC - - 2.5 mA
Collector to Emitter Saturation Voltage VCE(SAT) IC = 10A, VGE = 15V TC = 25oC - 2.45 2.7 V
TC = 150oC - 3.7 4.2 V
Gate to Emitter Threshold Voltage VGE(TH) IC = 90µA, VCE = VGE 6.0 6.8 - V
Gate to Emitter Leakage Current IGES VGE = ±20V - - ±250 nA
Switching SOA SSOA TJ = 150oC, RG = 10Ω, VGE = 15V, L = 400µH, VCE(PK) = 1200V 55 - - A
Gate to Emitter Plateau Voltage VGEP IC = 10A, VCE = 600V - 10.4 - V
On-State Gate Charge QG(ON) IC = 10A, VCE = 600V VGE = 15V - 100 120 nC
VGE = 20V - 130 150 nC
Current Turn-On Delay Time td(ON)I IGBT and Diode at TJ = 25oC ICE = 10A VCE = 960V VGE = 15V RG = 10Ω L = 2mH Test Circuit (Figure 20) - 23 26 ns
Current Rise Time trI - 11 15 ns
Current Turn-Off Delay Time td(OFF)I - 165 210 ns
Current Fall Time tfI - 100 140 ns
Turn-On Energy EON - 0.85 1.05 mJ
Turn-Off Energy (Note 3) EOFF - 0.8 1.0 mJ

Page 3

Electrical Specifications TC = 25oC, Unless Otherwise Specified (Continued)
PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNITS
Current Turn-On Delay Time td(ON)I IGBT and Diode at TJ = 150oC ICE = 10A VCE = 960V VGE = 15V RG = 10Ω L = 2mH Test Circuit (Figure 20) - 21 25 ns
Current Rise Time trI - 11 15 ns
Current Turn-Off Delay Time td(OFF)I - 190 250 ns
Current Fall Time tfI - 140 200 ns
Turn-On Energy EON - 1.75 2.3 mJ
Turn-Off Energy (Note 3) EOFF - 1.1 1.4 mJ
Diode Forward Voltage VEC IEC = 10A - 2.55 3.2 V
Diode Reverse Recovery Time trr IEC = 10A, dIEC/dt = 200A/µs - 57 70 ns
IEC = 1A, dIEC/dt = 200A/µs - 32 40 ns
Thermal Resistance Junction To Case RθJC IGBT - - 0.42 oC/W
Diode - - 1.25 oC/W
NOTE: 3. Turn-Off Energy Loss (EOFF) is defined as the integral of the instantaneous power loss starting at the trailing edge of the input pulse and ending at the point where the collector current equals zero (ICE = 0A). All devices were tested per JEDEC Standard No. 24-1 Method for Measurement of Power Device Turn-Off Switching Loss. This test method produces the true total Turn-Off Energy Loss. Typical Performance Curves Unless Otherwise Specified 35 60 (A) VGE = 15V CURRENT (A) 30 50 CURRENT TJ = 150oC, RG = 10Ω, VG = 15V, L = 400µH 25 40 EMITTER 20 COLLECTOR 30 15 TO COLLECTOR 20 10 DC 5 10 ICE, ICE, 0 0 25 50 75 100 125 150 0 200 400 600 800 1000 1200 1400 TC, CASE TEMPERATURE (oC) VCE, COLLECTOR TO EMITTER VOLTAGE (V) FIGURE 1. DC COLLECTOR CURRENT vs CASE FIGURE 2. MINIMUM SWITCHING SAFE OPERATING AREA TEMPERATURE

Page 4

PDF page 4 diagram

Page 5

PDF page 5 diagram

Page 6

PDF page 6 diagram

Page 7

Test Circuit and Waveforms

L = 2mH

RG = 10Ω

+

VDD = 960V

-

FIGURE 20. INDUCTIVE SWITCHING TEST CIRCUIT

Handling Precautions for IGBTs

Insulated Gate Bipolar Transistors are susceptible to gate-insulation damage by the electrostatic discharge of energy through the devices. When handling these devices, care should be exercised to assure that the static charge built in the handler’s body capacitance is not discharged through the device. With proper handling and application procedures, however, IGBTs are currently being extensively used in production by numerous equipment manufacturers in military, industrial and consumer applications, with virtually no damage problems due to electrostatic discharge. IGBTs can be handled safely if the following basic precautions are taken: 1. Prior to assembly into a circuit, all leads should be kept

shorted together either by the use of metal shorting springs or by the insertion into conductive material such as “ECCOSORBD™ LD26” or equivalent. 2. When devices are removed by hand from their carriers, the hand being used should be grounded by any suitable means - for example, with a metallic wristband. 3. Tips of soldering irons should be grounded. 4. Devices should never be inserted into or removed from circuits with power on. 5. Gate Voltage Rating - Never exceed the gate-voltage rating of VGEM. Exceeding the rated VGE can result in permanent damage to the oxide layer in the gate region. 6. Gate Termination - The gates of these devices are essentially capacitors. Circuits that leave the gate

open-circuited or floating should be avoided. These conditions can result in turn-on of the device due to voltage buildup on the input capacitor due to leakage currents or pickup. 7. Gate Protection - These devices do not have an internal monolithic Zener diode from gate to emitter. If gate protection is required an external Zener is recommended.

90%

10%

VGE

EON

EOFF

VCE

90%

10%

ICE

td(OFF)I

trI

tfI

td(ON)I

FIGURE 21. SWITCHING TEST WAVEFORMS

Operating Frequency Information

Operating frequency information for a typical device (Figure 3) is presented as a guide for estimating device performance for a specific application. Other typical frequency vs collector current (ICE) plots are possible using the information shown for a typical unit in Figures 5, 6, 7, 8, 9 and 11. The operating frequency plot (Figure 3) of a typical device shows fMAX1 or fMAX2; whichever is smaller at each point. The information is based on measurements of a typical device and is bounded by the maximum rated junction temperature.

fMAX1 is defined by fMAX1 = 0.05/(td(OFF)I+ td(ON)I). Deadtime (the denominator) has been arbitrarily held to 10% of the on-state time for a 50% duty factor. Other definitions are possible. td(OFF)I and td(ON)I are defined in Figure 21. Device turn-off delay can establish an additional frequency limiting condition for an application other than TJM. td(OFF)I is important when controlling output ripple under a lightly loaded condition.

fMAX2 is defined by fMAX2 = (PD - PC)/(EOFF + EON). The allowable dissipation (PD) is defined by PD = (TJM - TC)/RθJC. The sum of device switching and conduction losses must not exceed PD. A 50% duty factor was used (Figure 3) and the conduction losses (PC) are approximated by PC = (VCE x ICE)/2.

EON and EOFF are defined in the switching waveforms shown in Figure 21. EON is the integral of the instantaneous power loss (ICE x VCE) during turn-on and EOFF is the integral of the instantaneous power loss (ICE x VCE) during turn-off. All tail losses are included in the calculation for EOFF; i.e., the collector current equals zero (ICE = 0).

Page 8

TRADEMARKS

The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.

FAST

ACEx™

FASTr™

Bottomless™

FRFET™

CoolFET™

GlobalOptoisolator™ POP™

CROSSVOLT™

GTO™

DenseTrench™

HiSeC™

DOME™

ISOPLANAR™

EcoSPARK™

LittleFET™

E2CMOSTM

QS™

MicroFET™

EnSignaTM

MicroPak™

FACT™

FACT Quiet Series™ MICROWIRE™

STAR\*POWER is used under license

DISCLAIMER

SMART START™ VCX™

OPTOLOGIC™

STAR\*POWER™

OPTOPLANAR™

Stealth™

PACMAN™

SuperSOT™-3

SuperSOT™-6

Power247™

SuperSOT™-8

PowerTrench

SyncFET™

QFET™

TinyLogic™

TruTranslation™

QT Optoelectronics™

UHC™

Quiet Series™

UltraFET

SILENT SWITCHER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.

PRODUCT STATUS DEFINITIONS

Definition of Terms

Datasheet Identification

Product Status

Advance Information

Formative or In Design

Preliminary

First Production

No Identification Needed

Full Production

Obsolete

Not In Production

  1. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.

Definition

This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.

This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.

This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.

This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.

Rev. H4