DATASHEET SEARCH SITE
Document overview
- PDF pages: 8
Technical content
Page 1
Data Sheet
5.3A, 1200V, NPT Series N-Channel IGBT
The HGTD1N120BNS and HGTP1N120BN are Non-Punch Through (NPT) IGBT designs. They are new members of the MOS gated high voltage switching IGBT family. IGBTs combine the best features of MOSFETs and bipolar transistors. This device has the high input impedance of a MOSFET and the low on-state conduction loss of a bipolar transistor.
The IGBT is ideal for many high voltage switching applications operating at moderate frequencies where low conduction losses are essential, such as: AC and DC motor controls, power supplies and drivers for solenoids, relays and contactors.
Formerly Developmental Type TA49316.
Ordering Information
| PART NUMBER | PACKAGE | BRAND |
|---|---|---|
| HGTD1N120BNS | TO-252AA | 1N120B |
| HGTP1N120BN | TO-220AB | 1N120BN |
NOTE: When ordering, use the entire part number. Add the suffix 9A to obtain the TO-252AA in tape and reel, i.e. HGTD1N120BNS9A
Symbol
C
G
E
January 2001
Features
- 5.3A, 1200V, TC = 25oC
- 1200V Switching SOA Capability
- Typical EOFF . . . . . . . . . . . . . . . . . . 120µJ at TJ = 150oC
- Short Circuit Rating
- Low Conduction Loss
- Avalanche Rated
- Temperature CompensatingSABER™ Model Thermal ImpedanceSPICE Model www.fairchildsemi.com
- Related Literature - TB334, “Guidelines for Soldering Surface Mount Components to PC Boards”
Packaging
JEDEC TO-220AB
E C G
COLLECTOR
(FLANGE)
JEDEC TO-252AA
COLLECTOR
(FLANGE)
G E
FAIRCHILD SEMICONDUCTOR IGBT PRODUCT IS COVERED BY ONE OR MORE OF THE FOLLOWING U.S. PATENTS
4,364,073
4,417,385
4,430,792
4,443,931
4,466,176
4,516,143
4,532,534
4,587,713
4,598,461
4,605,948
4,620,211
4,631,564
4,639,754
4,639,762
4,641,162
4,644,637
4,682,195
4,684,413
4,694,313
4,717,679
4,743,952
4,783,690
4,794,432
4,801,986
4,803,533
4,809,045
4,809,047
4,810,665
4,823,176
4,837,606
4,860,080
4,883,767
4,888,627
4,890,143
4,901,127
4,904,609
4,933,740
4,963,951
4,969,027
Page 2
| Absolute Maximum Ratings TC = 25oC, Unless Otherwise Specified ALL TYPES UNITS Collector to Emitter Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BVCES 1200 V Collector Current Continuous At TC = 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IC25 5.3 A At TC = 110oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IC110 2.7 A Collector Current Pulsed (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ICM 6 A Gate to Emitter Voltage Continuous. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGES ±20 V Gate to Emitter Voltage Pulsed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VGEM ±30 V Switching Safe Operating Area at TJ = 150oC (Figure 2) . . . . . . . . . . . . . . . . . . . . . . . SSOA 6A at 1200V Power Dissipation Total at TC = 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD 60 W Power Dissipation Derating TC > 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.476 W/oC Forward Voltage Avalanche Energy (Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EAV 10 mJ Operating and Storage Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . TJ, TSTG -55 to 150 oC Maximum Lead Temperature for Soldering Leads at 0.063in (1.6mm) from Case for 10s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TL 300 oC Package Body for 10s, see Techbrief 334 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tpkg 260 oC Short Circuit Withstand Time (Note 3) at VGE = 15V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .tSC 8 µs Short Circuit Withstand Time (Note 3) at VGE = 13V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .tSC 13 µs CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTES: 1. Single Pulse; VGE = 15V; Pulse width limited by maximum junction temperature. 2. ICE = 7A, L = 400µH, VGE = 15V, TJ = 25oC. 3. VCE(PK) = 840V, TJ = 125oC, RG = 82Ω. | |||||||
|---|---|---|---|---|---|---|---|
| Electrical Specifications TC = 25oC, Unless Otherwise Specified | |||||||
| PARAMETER | SYMBOL | TEST CONDITIONS | MIN | TYP | MAX | UNITS | |
| Collector to Emitter Breakdown Voltage | BVCES | IC = 250µA, VGE = 0V | 1200 | - | - | V | |
| Emitter to Collector Breakdown Voltage | BVECS | IC = 10mA, VGE = 0V | 15 | - | - | V | |
| Collector to Emitter Leakage Current | ICES | VCE = 1200V | TC = 25oC | - | - | 250 | µA |
| TC = 125oC | - | 20 | - | µA | |||
| TC = 150oC | - | - | 1.0 | mA | |||
| Collector to Emitter Saturation Voltage | VCE(SAT) | IC = 1.0A VGE = 15V | TC = 25oC | - | 2.5 | 2.9 | V |
| TC = 150oC | - | 3.8 | 4.3 | V | |||
| Gate to Emitter Threshold Voltage | VGE(TH) | IC = 50µA, VCE = VGE | 6.0 | 7.1 | - | V | |
| Gate to Emitter Leakage Current | IGES | VGE = ±20V | - | - | ±250 | nA | |
| Switching SOA | SSOA | TJ = 150oC, RG = 82Ω, VGE = 15V, L = 2mH, VCE(PK) = 1200V | 6 | - | - | A | |
| Gate to Emitter Plateau Voltage | VGEP | IC = 1.0A, VCE = 600V | - | 9.2 | - | V | |
| On-State Gate Charge | QG(ON) | IC = 1.0A VCE = 600V | VGE = 15V | - | 14 | 20 | nC |
| VGE = 20V | - | 15 | 21 | nC | |||
Page 3
| Electrical Specifications TC = 25oC, Unless Otherwise Specified (Continued) | ||||||
| PARAMETER | SYMBOL | TEST CONDITIONS | MIN | TYP | MAX | UNITS |
| Current Turn-On Delay Time | td(ON)I | IGBT and Diode at TJ = 25oC ICE = 1.0A VCE = 960V VGE = 15V RG = 82Ω L = 4mH Test Circuit (Figure 18) | - | 15 | 20 | ns |
| Current Rise Time | trI | - | 11 | 14 | ns | |
| Current Turn-Off Delay Time | td(OFF)I | - | 67 | 76 | ns | |
| Current Fall Time | tfI | - | 226 | 300 | ns | |
| Turn-On Energy (Note 5) | EON1 | - | 70 | - | µJ | |
| Turn-On Energy (Note 5) | EON2 | - | 172 | 187 | µJ | |
| Turn-Off Energy (Note 4) | EOFF | - | 90 | 123 | µJ | |
| Current Turn-On Delay Time | td(ON)I | IGBT and Diode at TJ = 150oC ICE = 1.0 A VCE = 960V VGE = 15V RG = 82Ω L = 4mH Test Circuit (Figure 18) | - | 13 | 17 | ns |
| Current Rise Time | trI | - | 11 | 15 | ns | |
| Current Turn-Off Delay Time | td(OFF)I | - | 75 | 88 | ns | |
| Current Fall Time | tfI | - | 258 | 370 | ns | |
| Turn-On Energy (Note 5) | EON1 | - | 145 | - | µJ | |
| Turn-On Energy (Note 5) | EON2 | - | 385 | 440 | µJ | |
| Turn-Off Energy (Note 4) | EOFF | - | 120 | 175 | µJ | |
| Thermal Resistance Junction To Case | RθJC | - | - | 2.1 | oC/W | |
| NOTES: 4. Turn-Off Energy Loss (EOFF) is defined as the integral of the instantaneous power loss starting at the trailing edge of the input pulse and ending at the point where the collector current equals zero (ICE = 0A). All devices were tested per JEDEC Standard No. 24-1 Method for Measurement of Power Device Turn-Off Switching Loss. This test method produces the true total Turn-Off Energy Loss. 5. Values for two Turn-On loss conditions are shown for the convenience of the circuit designer. EON1 is the turn-on loss of the IGBT only. EON2 is the turn-on loss when a typical diode is used in the test circuit and the diode is at the same TJ as the IGBT. The diode type is specified in Figure 18. Typical Performance Curves (Unless Otherwise Specified) 6 7 (A) VGE = 15V TJ = 150oC, RG = 82Ω, VGE = 15V, L = 2mH (A) CURRENT 5 6 CURRENT 5 4 EMITTER 4 COLLECTOR 3 3 TO 2 COLLECTOR 2 DC 1 1 ICE, ICE, 0 0 25 50 75 100 125 150 0 200 400 600 800 1000 1200 1400 TC, CASE TEMPERATURE (oC) VCE, COLLECTOR TO EMITTER VOLTAGE (V) FIGURE 1. DC COLLECTOR CURRENT vs CASE FIGURE 2. MINIMUM SWITCHING SAFE OPERATING AREA TEMPERATURE | ||||||
Page 4

Page 5

Page 6

Page 7
Handling Precautions for IGBTs
Insulated Gate Bipolar Transistors are susceptible to gate-insulation damage by the electrostatic discharge of energy through the devices. When handling these devices, care should be exercised to assure that the static charge built in the handler’s body capacitance is not discharged through the device. With proper handling and application procedures, however, IGBTs are currently being extensively used in production by numerous equipment manufacturers in military, industrial and consumer applications, with virtually no damage problems due to electrostatic discharge. IGBTs can be handled safely if the following basic precautions are taken:
- Prior to assembly into a circuit, all leads should be kept shorted together either by the use of metal shorting springs or by the insertion into conductive material such as “ECCOSORBD™ LD26” or equivalent. 2. When devices are removed by hand from their carriers, the hand being used should be grounded by any suitable means - for example, with a metallic wristband. 3. Tips of soldering irons should be grounded. 4. Devices should never be inserted into or removed from circuits with power on. 5. Gate Voltage Rating - Never exceed the gate-voltage rating of VGEM. Exceeding the rated VGE can result in permanent damage to the oxide layer in the gate region. 6. Gate Termination - The gates of these devices are
essentially capacitors. Circuits that leave the gate open-circuited or floating should be avoided. These conditions can result in turn-on of the device due to voltage buildup on the input capacitor due to leakage currents or pickup. 7. Gate Protection - These devices do not have an internal monolithic Zener diode from gate to emitter. If gate protection is required an external Zener is recommended.
Operating Frequency Information
Operating frequency information for a typical device (Figure 3) is presented as a guide for estimating device performance for a specific application. Other typical frequency vs collector current (ICE) plots are possible using the information shown for a typical unit in Figures 6, 7, 8, 9 and 11. The operating frequency plot (Figure 3) of a typical device shows fMAX1 or fMAX2; whichever is smaller at each point. The information is based on measurements of a typical device and is bounded by the maximum rated junction temperature.
fMAX1 is defined by fMAX1 = 0.05/(td(OFF)I+ td(ON)I). Deadtime (the denominator) has been arbitrarily held to 10% of the on-state time for a 50% duty factor. Other definitions are possible. td(OFF)I and td(ON)I are defined in Figure 19. Device turn-off delay can establish an additional frequency limiting condition for an application other than TJM. td(OFF)I is important when controlling output ripple under a lightly loaded condition.
fMAX2 is defined by fMAX2 = (PD - PC)/(EOFF + EON2). The allowable dissipation (PD) is defined by PD = (TJM - TC)/RθJC. The sum of device switching and conduction losses must not exceed PD. A 50% duty factor was used (Figure 3) and the conduction losses (PC) are approximated by PC = (VCE x ICE)/2.
EON2 and EOFF are defined in the switching waveforms shown in Figure 19. EON2 is the integral of the instantaneous power loss (ICE x VCE) during turn-on and EOFF is the integral of the instantaneous power loss (ICE x VCE) during turn-off. All tail losses are included in the calculation for EOFF; i.e., the collector current equals zero (ICE = 0).
Page 8
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
FAST
ACEx™
FASTr™
Bottomless™
FRFET™
CoolFET™
GlobalOptoisolator™ POP™
CROSSVOLT™
GTO™
DenseTrench™
HiSeC™
DOME™
ISOPLANAR™
EcoSPARK™
LittleFET™
E2CMOSTM
QS™
MicroFET™
EnSignaTM
MicroPak™
FACT™
FACT Quiet Series™ MICROWIRE™
STAR\*POWER is used under license
DISCLAIMER
SMART START™ VCX™
OPTOLOGIC™
STAR\*POWER™
OPTOPLANAR™
Stealth™
PACMAN™
SuperSOT™-3
SuperSOT™-6
Power247™
SuperSOT™-8
PowerTrench
SyncFET™
QFET™
TinyLogic™
TruTranslation™
QT Optoelectronics™
UHC™
Quiet Series™
UltraFET
SILENT SWITCHER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Advance Information
Formative or In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
- A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Definition
This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.
This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. H4