HFA25TB60PBF_11 VISHAY

Document overview

  • PDF pages: 8

Technical content

Page 1

FEATURES

  • Ultrafast and ultrasoft recovery
PDF page 1 diagram
  • Very low IRRM and Qrr
  • Compliant to RoHS Directive 2002/95/EC
  • Designed and qualified for industrial level

BENEFITS

  • Reduced RFI and EMI
  • Reduced power loss in diode and switching transistor
  • Higher frequency operation
  • Reduced snubbing
  • Reduced parts count

DESCRIPTION

VS-HFA25TB60PbF is a state of the art ultrafast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 600 V and 25 A continuous current, the VS-HFA25TB60PbF is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to

PRODUCT SUMMARY
Package TO-220AC
I F(AV) 25 A
V R 600 V
V at I F F 1.7 V
t (typ.) rr 23 ns
T max. J 150 °C
Diode variation Single die

ultrafast recovery time, the HEXFRED® product line features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to “snap-off” during the tb portion of recovery. The HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED VS-HFA25TB60PbF is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high

efficiency is needed.

ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Cathode to anode voltage V R 600 V
Maximum continuous forward current I F T = 100 °C C 25 A
Single pulse forward current I FSM 225
Maximum repetitive forward current I FRM 100
Maximum power dissipation P D T = 25 °C C 125 W
T = 100 °C C 50
Operating junction and storage temperature range T , T J Stg - 55 to + 150 °C

Page 2

ELECTRICAL SPECIFICATIONS (T = 25 °C unless otherwise specified) J
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS
Cathode to anode breakdown voltage V BR I = 100 μA R 600 - - V
Maximum forward voltage V FM I = 25 A F See fig. 1 - 1.3 1.7
I = 50 A F - 1.5 2.0
I = 25 A, T = 125 °C F J - 1.3 1.7
Maximum reverse leakage current I RM V = V rated R R See fig. 2 - 1.5 20 μA
T = 125 °C, V = 0.8 x V rated J R R - 600 2000
Junction capacitance C T V = 200 V R See fig. 3 - 55 100 pF
Series inductance L S Measured lead to lead 5 mm from package body - 8.0 - nH
DYNAMIC RECOVERY CHARACTERISTICS (T = 25 °C unless otherwise specified) J
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS
Reverse recovery time See fig. 5, 6 and 16 t rr I = 1.0 A, dI /dt = 200 A/μs, V = 30 V F F R - 23 - ns
t rr1 T = 25 °C J I = 25 A F dI /dt = 200 A/μs F V = 200 V R - 50 75
t rr2 T = 125 °C J - 105 160
Peak recovery current See fig. 7 and 8 I RRM1 T = 25 °C J - 4.5 10 A
I RRM2 T = 125 °C J - 8.0 15
Reverse recovery charge See fig. 9 and 10 Q rr1 T = 25 °C J - 112 375 nC
Q rr2 T = 125 °C J - 420 1200
Peak rate of fall of recovery current during t b See fig. 11 and 12 dI /dt1 (rec)M T = 25 °C J - 250 - A/μs
dI /dt2 (rec)M T = 125 °C J - 160 -
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS
Lead temperature T lead 0.063” from case (1.6 mm) for 10 s - - 300 °C
Thermal resistance, junction to case R thJC - - 1.0 K/W
Thermal resistance, junction to ambient R thJA Typical socket mount - - 80
Thermal resistance, case to heatsink R thCS Mounting surface, flat, smooth and greased - 0.5 -
Weight - 2.0 - g
- 0.07 - oz.
Mounting torque 6.0 (5.0) - 12 (10) kgf · cm (lbf · in)
Marking device Case style TO-220AC HFA25TB60

Page 3

PDF page 3 diagram
PDF page 3 diagram

Fig. 1 - Maximum Forward Voltage Drop vs.

Fig. 2 - Typical Reverse Current vs. Reverse Voltage

Instantaneous Forward Current

PDF page 3 diagram

Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage

PDF page 3 diagram

Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics

Page 4

PDF page 4 diagram

Fig. 5 - Typical Reverse Recovery Time vs. dIF/dt

PDF page 4 diagram

Fig. 6 - Typical Recovery Current vs. dIF/dt

PDF page 4 diagram

Fig. 7 - Typical Stored Charge vs. dIF/dt

PDF page 4 diagram

Fig. 8 - Typical dI(rec)M/dt vs. dIF/dt

Page 5

PDF page 5 diagram

Fig. 9 - Reverse Recovery Parameter Test Circuit

PDF page 5 diagram

Fig. 10 - Reverse Recovery Waveform and Definitions

Page 6

ORDERING INFORMATION TABLE

PDF page 6 diagram
VS- HF A 25 TB 60 PbF
1 2 3 4 5 6 7
PDF page 6 diagram
LINKS TO RELATED DOCUMENTS
Dimensions www.vishay.com/doc?95221
Part marking information www.vishay.com/doc?95224

Page 7

Outline Dimensions

TO-220AC

DIMENSIONS in millimeters and inches

PDF page 7 diagram
PDF page 7 diagram

Notes (1) Dimensioning and tolerancing as per ASME Y14.5M-1994 (2) Lead dimension and finish uncontrolled in L1 (3) Dimension D, D1 and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Dimension b1, b3 and c1 apply to base metal only (5) Controlling dimension: inches (6) Thermal pad contour optional within dimensions E, H1, D2 and E1 (7) Dimension E2 x H1 define a zone where stamping and singulation irregularities are allowed (8) Outline conforms to JEDEC TO-220, D2 (minimum) where dimensions are derived from the actual package outline

Document Number: 95221 Revision: 07-Mar-11

Page 8

Legal Disclaimer Notice

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 91000 Revision: 11-Mar-11