HFA210NJ60CPBF VISHAY

Document overview

  • PDF pages: 7

Technical content

Page 1

Ultrafast Soft Recovery Diode, 210 A

FEATURES

PDF page 1 diagram
  • Very low Qrr and trr
  • Lead (Pb)-free

RoHS

  • Designed and qualified for industrial level

COMPLIANT

BENEFITS

  • Reduced RFI and EMI
  • Reduced snubbing

DESCRIPTION

HEXFRED® diodes are optimized to reduce losses and EMI/RFI in high frequency power conditioning systems. An extensive characterization of the recovery behavior for different values of current, temperature and dI/dt simplifies

PRODUCT SUMMARY
I F(AV) 210 A
V R 600 V
I at T F(DC) C 120 A at 100 °C

the calculations of losses in the operating conditions. The softness of the recovery eliminates the need for a snubber in most applications. These devices are ideally suited for power converters, motors drives and other applications where switching losses are significant portion of the total losses.

ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS MAX. UNITS
Cathode to anode voltage V R 600 V
Continuous forward current I F T = 25 °C C 235 A
T = 100 °C C 120
Single pulse forward current I FSM Limited by junction temperature 600
Non-repetitive avalanche energy E AS L = 100 µH, duty cycle limited by maximum T J 2.2 mJ
Maximum power dissipation P D T = 25 °C C 463 W
T = 100 °C C 185
Operating junction and storage temperature range T , T J Stg - 55 to + 150 °C
ELECTRICAL SPECIFICATIONS PER LEG (T = 25 °C unless otherwise specified) J
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS
Cathode to anode breakdown voltage V BR I = 100 µA R 600 - - V
Maximum forward voltage V FM I = 105 A F See fig. 1 - 1.38 1.9
I = 210 A F - 1.6 2.25
I = 105 A, T = 125 °C F J - 1.3 1.56
Maximum reverse leakage current I RM T = 125 °C, V = 480 V J R See fig. 2 - 1.8 6.0 mA
Junction capacitance C T V = 200 V R See fig. 3 - 200 300 pF
Series inductance L S From top of terminal hole to mounting plane - 6.0 - nH

Page 2

Diode, 210 A

DYNAMIC RECOVERY CHARACTERISTICS (T = 25 °C unless otherwise specified) J
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS
Reverse recovery time See fig. 5 t rr I = 1.0 A, dI /dt = 200 A/µs, V = 30 V F F R - 35 - ns
T = 25 °C J I = 105 A F dI /dt = 200 A/µs F V = 200 V R - 90 140
T = 125 °C J - 160 240
Peak recovery current See fig. 6 I RRM T = 25 °C J - 10 18 A
T = 125 °C J - 15 30
Reverse recovery charge See fig. 7 Q rr T = 25 °C J - 450 1300 nC
T = 125 °C J - 1200 3600
Peak rate of recovery current See fig. 8 dI /dt (rec)M T = 25 °C J - 310 - A/µs
T = 125 °C J - 240 -
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL MIN. TYP. MAX. UNITS
Maximum junction and storage temperature range T , T J Stg - 55 - 150 °C
per leg Thermal resistance, junction to case per module R thJC - - 0.27 °C/W K/W
- - 0.135
Typical thermal resistance, case to heatsink R thCS - 0.10 -
Weight - 68 - g
- 2.4 - oz.
Mounting torque (1) 30 (3.4) - 40 (4.6) N ⋅ m (lbf ⋅ in)
Mounting torque center hole 12 (1.4) - 18 (2.1)
Terminal torque 30 (3.4) - 40 (4.6)
Vertical pull - - 80 lbf ⋅ in
2" lever pull - - 35

Note (1) Mounting surface must be smooth, flat, free of burrs or other protrusions. Apply a thin even film or thermal grease to mounting surface. Gradually tighten each mounting bolt in 5 to 10 lbf ⋅ in steps until desired or maximum torque limits are reached

Page 3

Diode, 210 A

PDF page 3 diagram

Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current (Per Leg)

PDF page 3 diagram

Fig. 2 - Typical Reverse Current vs. Reverse Voltage (Per Leg)

PDF page 3 diagram

Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg)

PDF page 3 diagram

Fig. 4 - Maximum Allowable Case Temperature vs. DC Forward Current (Per Leg)

PDF page 3 diagram

Fig. 5 - Typical Reverse Recovery Time vs. dIF/dt (Per Leg)

Page 4

Diode, 210 A

PDF page 4 diagram
PDF page 4 diagram

Fig. 6 - Typical Recovery Current vs. dIF/dt (Per Leg)

Fig. 7 - Typical Stored Charge vs. dIF/dt (Per Leg)

PDF page 4 diagram

Fig. 8 - Typical dI(rec)M/dt vs. dIF/dt (Per Leg)

PDF page 4 diagram

Fig. 9 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg)

Page 5

Diode, 210 A

PDF page 5 diagram

Fig. 10 - Reverse Recovery Parameter Test Circuit

PDF page 5 diagram

Fig. 11 - Reverse Recovery Waveform and Definitions

PDF page 5 diagram

Fig. 12 - Avalanche Test Circuit and Waveforms

Page 6

Diode, 210 A

ORDERING INFORMATION TABLE

PDF page 6 diagram
HFA 210 NJ 60 C PbF
1 2 3 4 5 6
PDF page 6 diagram
LINKS TO RELATED DOCUMENTS
Dimensions http://www.vishay.com/doc?95021

Page 7

Legal Disclaimer Notice

Vishay

Disclaimer

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 91000 Revision: 18-Jul-08