HFA16TB120S VISHAY

Document overview

  • PDF pages: 6

Technical content

Page 1

FEATURES

  • Ultrafast recovery
  • Ultrasoft recovery
  • Very low IRRM
  • Very low Qrr
  • Specified at operating conditions
  • Designed and qualified for industrial level

BENEFITS

2

  • Reduced RFI and EMI
  • Reduced power loss in diode and switching transistor
  • Higher frequency operation
  • Reduced snubbing
  • Reduced parts count

1 3

N/C Anode

DESCRIPTION

D2PAK

HFA16TB120S is a state of the art ultrafast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 1200 V and 16 A continuous current, the

PRODUCT SUMMARY
V R 1200 V
V at 16 A at 25 °C F 3 V
I F(AV) 16 A
t (typical) rr 30 ns
T (maximum) J 150 °C
Q (typical) rr 260 nC
dI /dt (typical) at 125 °C (rec)M 76 A/µs
I (typical) RRM 5.8 A

HFA16TB120S is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultrafast recovery time, the HEXFRED® product line features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to “snap-off” during the tb portion of recovery. The HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED HFA16TB120S is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and

many other similar applications where high speed, high efficiency is needed.

ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS MAX. UNITS
Cathode to anode voltage V R 1200 V
Maximum continuous forward current I F T = 100 °C C 16 A
Single pulse forward current I FSM 190
Maximum repetitive forward current I FRM 64
Maximum power dissipation P D T = 25 °C C 151 W
T = 100 °C C 60
Operating junction and storage temperature range T , T J Stg - 55 to + 150 °C

Page 2

ELECTRICAL SPECIFICATIONS (T = 25 °C unless otherwise specified) J
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS
Cathode to anode breakdown voltage V BR I = 100 µA R 1200 - - V
Maximum forward voltage V FM I = 16 A F See fig. 1 - 2.5 3.0
I = 32 A F - 3.2 3.93
I = 16 A, T = 125 °C F J - 2.3 2.7
Maximum reverse leakage current I RM V = V rated R R See fig. 2 - 0.75 20 µA
T = 125 °C, V = 0.8 x V rated J R R - 375 2000
Junction capacitance C T V = 200 V R See fig. 3 - 27 40 pF
Series inductance L S Measured lead to lead 5 mm from package body - 8.0 - nH
DYNAMIC RECOVERY CHARACTERISTICS (T = 25 °C unless otherwise specified) J
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS
Reverse recovery time See fig. 5 and 10 t rr I = 1.0 A, dI /dt = 200 A/µs, V = 30 V F F R - 30 - ns
t rr1 T = 25 °C J I = 16 A F dI /dt = 200 A/µs F V = 200 V R - 90 135
t rr2 T = 125 °C J - 164 245
Peak recovery current See fig. 6 I RRM1 T = 25 °C J - 5.8 10 A
I RRM2 T = 125 °C J - 8.3 15
Reverse recovery charge See fig. 7 Q rr1 T = 25 °C J - 260 675 nC
Q rr2 T = 125 °C J - 680 1838
Peak rate of fall of recovery current during t b See fig. 8 dI /dt1 (rec)M T = 25 °C J - 120 - A/µs
dI /dt2 (rec)M T = 125 °C J - 76 -
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS
Lead temperature T lead 0.063" from case (1.6 mm) for 10 s - - 300 °C
Thermal resistance, junction to case R thJC - - 0.83 K/W
Thermal resistance, junction to ambient R thJA Typical socket mount - - 80
Weight - 2.0 - g
- 0.07 - oz.
Marking device Case style D2PAK HFA16TB120S

Page 3

PDF page 3 diagram

Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous

Forward Current

PDF page 3 diagram

Fig. 2 - Typical Reverse Current vs. Reverse Voltage

PDF page 3 diagram

Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage

PDF page 3 diagram

Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics

Page 4

PDF page 4 diagram

Fig. 5 - Typical Reverse Recovery Time vs. dIF/dt (Per Leg)

PDF page 4 diagram

Fig. 6 - Typical Recovery Current vs. diF/dt (Per Leg)

PDF page 4 diagram

Fig. 7 - Typical Stored Charge vs. dIF/dt (Per Leg)

PDF page 4 diagram

Fig. 8 - Typical dI(rec)M/dt vs. dIF/dt (Per Leg)

Page 5

PDF page 5 diagram

Fig. 9 - Reverse Recovery Parameter Test Circuit

PDF page 5 diagram

Fig. 10 - Reverse Recovery Waveform and Definitions

LINKS TO RELATED DOCUMENTS
Dimensions http://www.vishay.com/doc?95046
Part marking information http://www.vishay.com/doc?95054
Packaging information http://www.vishay.com/doc?95032

Page 6

Legal Disclaimer Notice

Vishay

Disclaimer

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 91000 Revision: 18-Jul-08