HFA16TB120PBF_11 VISHAY
Document overview
- PDF pages: 8
Technical content
Page 1
FEATURES
- Ultrafast and ultrasoft recovery

- Very low IRRM and Qrr
- Compliant to RoHS Directive 2002/95/EC
- Designed and qualified for industrial level
BENEFITS
- Reduced RFI and EMI
- Reduced power loss in diode and switching transistor
- Higher frequency operation
- Reduced snubbing
- Reduced parts count
DESCRIPTION
VS-HFA16TB120PbF is a state of the art ultrafast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 1200 V and 16 A continuous current, the VS-HFA16TB120PbF is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultrafast recovery time, the HEXFRED® product line
| PRODUCT SUMMARY | |
| Package | TO-220AC |
| I F(AV) | 16 A |
| V R | 1200 V |
| V at I F F | 3.0 V |
| t (typ.) rr | 30 ns |
| T max. J | 150 °C |
| Diode variation | Single die |
features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to “snap-off” during the tb portion of recovery. The HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED VS-HFA16TB120PbF is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed.
| ABSOLUTE MAXIMUM RATINGS | ||||
|---|---|---|---|---|
| PARAMETER | SYMBOL | TEST CONDITIONS | VALUES | UNITS |
| Cathode to anode voltage | V R | 1200 | V | |
| Maximum continuous forward current | I F | T = 100 °C C | 16 | A |
| Single pulse forward current | I FSM | 190 | ||
| Maximum repetitive forward current | I FRM | 64 | ||
| Maximum power dissipation | P D | T = 25 °C C | 151 | W |
| T = 100 °C C | 60 | |||
| Operating junction and storage temperature range | T , T J Stg | - 55 to + 150 | °C | |
Page 2
| ELECTRICAL SPECIFICATIONS (T = 25 °C unless otherwise specified) J | |||||||
| PARAMETER | SYMBOL | TEST CONDITIONS | MIN. | TYP. | MAX. | UNITS | |
| Cathode to anode breakdown voltage | V BR | I = 100 μA R | 1200 | - | - | V | |
| Maximum forward voltage | V FM | I = 16 A F | See fig. 1 | - | 2.5 | 3.0 | |
| I = 32 A F | - | 3.2 | 3.93 | ||||
| I = 16 A, T = 125 °C F J | - | 2.3 | 2.7 | ||||
| Maximum reverse leakage current | I RM | V = V rated R R | See fig. 2 | - | 0.75 | 20 | μA |
| T = 125 °C, V = 0.8 x V rated J R R | - | 375 | 2000 | ||||
| Junction capacitance | C T | V = 200 V R | See fig. 3 | - | 27 | 40 | pF |
| Series inductance | L S | Measured lead to lead 5 mm from package body | - | 8.0 | - | nH | |
| DYNAMIC RECOVERY CHARACTERISTICS (T = 25 °C unless otherwise specified) J | |||||||
| PARAMETER | SYMBOL | TEST CONDITIONS | MIN. | TYP. | MAX. | UNITS | |
| Reverse recovery time See fig. 5 and 10 | t rr | I = 1.0 A, dI /dt = 200 A/μs, V = 30 V F F R | - | 30 | - | ns | |
| t rr1 | T = 25 °C J | I = 16 A F dI /dt = 200 A/μs F V = 200 V R | - | 90 | 135 | ||
| t rr2 | T = 125 °C J | - | 164 | 245 | |||
| Peak recovery current See fig. 6 | I RRM1 | T = 25 °C J | - | 5.8 | 10 | A | |
| I RRM2 | T = 125 °C J | - | 8.3 | 15 | |||
| Reverse recovery charge See fig. 7 | Q rr1 | T = 25 °C J | - | 260 | 675 | nC | |
| Q rr2 | T = 125 °C J | - | 680 | 1838 | |||
| Peak rate of fall of recovery current during t b See fig. 8 | dI /dt1 (rec)M | T = 25 °C J | - | 120 | - | A/μs | |
| dI /dt2 (rec)M | T = 125 °C J | - | 76 | - | |||
| THERMAL - MECHANICAL SPECIFICATIONS | ||||||
| PARAMETER | SYMBOL | TEST CONDITIONS | MIN. | TYP. | MAX. | UNITS |
| Lead temperature | T lead | 0.063" from case (1.6 mm) for 10 s | - | - | 300 | °C |
| Thermal resistance, junction to case | R thJC | - | - | 0.83 | K/W | |
| Thermal resistance, junction to ambient | R thJA | Typical socket mount | - | - | 80 | |
| Thermal resistance, case to heatsink | R thCS | Mounting surface, flat, smooth and greased | - | 0.50 | - | |
| Weight | - | 2.0 | - | g | ||
| - | 0.07 | - | oz. | |||
| Mounting torque | 6.0 (5.0) | - | 12 (10) | kgf · cm (lbf · in) | ||
| Marking device | Case style TO-220AC | HFA16TB120 | ||||
Page 3


Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward
Fig. 2 - Typical Reverse Current vs.
Current
Reverse Voltage

Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage

Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics
Page 4

Fig. 5 - Typical Reverse Recovery Time vs. dIF/dt (Per Leg)

Fig. 6 - Typical Recovery Current vs. diF/dt (Per Leg)

Fig. 7 - Typical Stored Charge vs. dIF/dt (Per Leg)

Fig. 8 - Typical dI(rec)M/dt vs. dIF/dt (Per Leg)
Page 5

Fig. 9 - Reverse Recovery Parameter Test Circuit

Fig. 10 - Reverse Recovery Waveform and Definitions
Page 6
ORDERING INFORMATION TABLE

| VS- | HF | A | 16 | TB | 120 | PbF |
| 1 2 3 4 5 6 7 | ||||||

| LINKS TO RELATED DOCUMENTS | |
| Dimensions | www.vishay.com/doc?95221 |
| Part marking information | www.vishay.com/doc?95224 |
Page 7
Outline Dimensions
TO-220AC
DIMENSIONS in millimeters and inches


Notes (1) Dimensioning and tolerancing as per ASME Y14.5M-1994 (2) Lead dimension and finish uncontrolled in L1 (3) Dimension D, D1 and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Dimension b1, b3 and c1 apply to base metal only (5) Controlling dimension: inches (6) Thermal pad contour optional within dimensions E, H1, D2 and E1 (7) Dimension E2 x H1 define a zone where stamping and singulation irregularities are allowed (8) Outline conforms to JEDEC TO-220, D2 (minimum) where dimensions are derived from the actual package outline
Document Number: 95221 Revision: 07-Mar-11
Page 8
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 11-Mar-11