HFA16TA60CS IRF

Document overview

  • PDF pages: 6

Technical content

Page 1

Bulletin PD -20373 01/01

HFA16TA60CS

Ultrafast, Soft Recovery Diode

HEXFRED

TM

PDF page 1 diagram
PDF page 1 diagram

Features

  • Ultrafast Recovery
  • Ultrasoft Recovery
  • Very Low IRRM
  • Very Low Qrr
  • Specified at Operating Conditions

Benefits

  • Reduced RFI and EMI
  • Reduced Power Loss in Diode and Switching
PDF page 1 diagram

Transistor

  • Higher Frequency Operation
  • Reduced Snubbing
  • Reduced Parts Count

Description

International Rectifier's HFA16TA60CS is a state of the art center tap ultra fast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 600 volts and 8 amps per Leg continuous current, the HFA16TA60CS is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultra fast recovery time, the HEXFRED product line features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to "snap-off" during the tb portion of

recovery. The HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED HFA16TA60CS is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed.

Absolute Maximum Ratings (per Leg)

Parameter Max Units
VR Cathode-to-Anode Voltage 600 V
IF @ TC = 100°C Continuous Forward Current 8.0 A
IFSM Single Pulse Forward Current 60
IFRM Maximum Repetitive Forward Current 24
PD @ TC = 25°C Maximum Power Dissipation 36 W
PD @ TC = 100°C Maximum Power Dissipation 14
TJ Operating Junction and - 55 to +150 °C
TSTG Storage Temperature Range

1

Page 2

HFA16TA60CS

Bulletin PD-20373 01/01

Electrical Characteristics (per Leg) @ TJ = 25°C (unless otherwise specified)

Parameter Min Typ Max Units Test Conditions
VBR Cathode Anode Breakdown Voltage 600 V IR = 100µA
VFM Max Forward Voltage 1.4 1.7 V IF = 8A See Fig. 1 IF = 16A IF = 8A, TJ = 125°C
1.7 2.1
1.4 1.7
IRM Max Reverse Leakage Current 0.3 5 µA VR = VR Rated See Fig. 2 TJ = 125°C, VR = 0.8 x VR Rated D Rated
100 500
CT Junction Capacitance 10 25 pF VR = 200V See Fig. 3
LS Series Inductance 8.0 nH Measured lead to lead 5mm from package body

Dynamic Recovery Characteristics (per Leg) @ TJ = 25°C (unless otherwise specified)

PDF page 2 diagram

Thermal - Mechanical Characteristics

Parameter Min Typ Max Units
Tlead! Lead Temperature 300 °C
RthJC Junction-to-Case, Single Leg Conducting Junction-to-Case, Both Legs Conducting 3.5 K/W
1.75
RthJA" Thermal Resistance, Junction to Ambient 80
Wt Weight 2 g
0.07 (oz)
Mounting Torque 6 12 Kg-cm
5 10 lbf•in

! 0.063 in. from Case (1.6mm) for 10 sec " Typical Socket Mount

2

www.irf.com

Page 3

PDF page 3 diagram

Forward Voltage Drop - V (V)

FM

Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current, (per Leg)

HFA16TA60CS

Bulletin PD-20373 01/01

PDF page 3 diagram

Reverse Voltage - V (V)

R

Fig. 2 - Typical Reverse Current vs. Reverse Voltage, (per Leg)

PDF page 3 diagram

Reverse Voltage - VR ( V ) Reverse Voltage - V (V)

R

Fig. 3 - Typical Junction Capacitance vs.

PDF page 3 diagram

Page 4

HFA16TA60CS

Bulletin PD-20373 01/01

PDF page 4 diagram

di /dt - (A/µs) f

Fig. 5 - Typical Reverse Recovery vs. dif/dt,

(per Leg)

PDF page 4 diagram

di /dt - (A/µs) f

Fig. 7 - Typical Stored Charge vs. dif/dt,

(per Leg)

4

PDF page 4 diagram

di /dt - (A/µs) f

Fig. 6 - Typical Recovery Current vs. dif/dt,

(per Leg)

PDF page 4 diagram

di /dt - (A/µs) f

Fig. 8 - Typical di(rec)M/dt vs. dif/dt, (per Leg)

www.irf.com

Page 5

0

REVERSE RECOVERY CIRCUIT

PDF page 5 diagram

Fig. 9 - Reverse Recovery Parameter Test

Circuit

www.irf.com

HFA16TA60CS

Bulletin PD-20373 01/01

F 3 trr ta tb
Qrr4 2 I RRM 0.5I RRM di(rec)M/dt 5 0.75 IRRM

di /dt f

  1. Qrr - Area under curve defined by trr
  1. dif/dt - Rate of change of current

and IRRM

through zero crossing

trr X IRRM Qrr =

  1. IRRM - Peak reverse recovery current

2

  1. trr - Reverse recovery time measured
  1. di(rec)M/dt - Peak rate of change of

from zero crossing point of negative

current during tb portion of trr

going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current

Fig. 10 - Reverse Recovery Waveform and

Definitions

5

Page 6

HFA16TA60CS

Bulletin PD-20373 01/01

PDF page 6 diagram

IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105

TAC Fax: (310) 252-7309

Visit us at www.irf.com for sales contact information. 01/01

6

www.irf.com