HFA16PB120PBF_11 VISHAY

Document overview

  • PDF pages: 8

Technical content

Page 1

FEATURES

  • Ultrafast and ultrasoft recovery
PDF page 1 diagram
  • Very low IRRM and Qrr
  • Compliant to RoHS Directive 2002/95/EC
  • Designed and qualified for industrial level

BENEFITS

  • Reduced RFI and EMI
  • Reduced power loss in diode and switching transistor
  • Higher frequency operation
  • Reduced snubbing
  • Reduced parts count

DESCRIPTION

VS-HFA16PB120PbF is a state of the art ultrafast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 1200 V and 16 A continuous current, the VS-HFA16PB120PbF is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultrafast recovery time, the HEXFRED® product line features

PRODUCT SUMMARY
Package TO-247AC modified (2 pins)
I F(AV) 16 A
V R 1200 V
V at I F F 3.0 V
t (typ.) rr 30 ns
T max. J 150 °C
Diode variation Single die

extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to “snap-off” during the tb portion of recovery. The HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED VS-HFA16PB120PbF is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed.

ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Cathode to anode voltage V R 1200 V
Maximum continuous forward current I F T = 100 °C C 16 A
Single pulse forward current I FSM 190
Maximum repetitive forward current I FRM 64
Maximum power dissipation P D T = 25 °C C 151 W
T = 100 °C C 60
Operating junction and storage temperature range T , T J Stg - 55 to + 150 °C

Page 2

ELECTRICAL SPECIFICATIONS (T = 25 °C unless otherwise specified) J
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS
Cathode to anode breakdown voltage V BR I = 100 µA R 1200 - - V
Maximum forward voltage V FM I = 16 A F See fig. 1 - 2.5 3.0
I = 32 A F - 3.2 3.93
I = 16 A, T = 125 °C F J - 2.3 2.7
Maximum reverse leakage current I RM V = V rated R R See fig. 2 - 0.75 20 µA
T = 125 °C, V = 0.8 x V rated J R R - 375 2000
Junction capacitance C T V = 200 V R See fig. 3 - 27 40 pF
Series inductance L S Measured lead to lead 5 mm from package body - 8.0 - nH
DYNAMIC RECOVERY CHARACTERISTICS (T = 25 °C unless otherwise specified) J
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS
Reverse recovery time See fig. 5, 10 t rr I = 1.0 A, dI /dt = 200 A/µs, V = 30 V F F R - 30 - ns
t rr1 T = 25 °C J I = 16 A F dI /dt = 200 A/µs F V = 200 V R - 90 135
t rr2 T = 125 °C J - 164 245
Peak recovery current See fig. 6 I RRM1 T = 25 °C J - 5.8 10 A
I RRM2 T = 125 °C J - 8.3 15
Reverse recovery charge See fig. 7 Q rr1 T = 25 °C J - 260 675 nC
Q rr2 T = 125 °C J - 680 1838
Peak rate of fall of recovery current during t b See fig. 8 dI /dt1 (rec)M T = 25 °C J - 120 - A/µs
dI /dt2 (rec)M T = 125 °C J - 76 -
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS
Lead temperature T lead 0.063" from case (1.6 mm) for 10 s - - 300 °C
Thermal resistance, junction to case R thJC - - 0.83 K/W
Thermal resistance, junction to ambient R thJA Typical socket mount - - 80
Thermal resistance, case to heatsink R thCS Mounting surface, flat, smooth and greased - 0.50 -
Weight - 2.0 - g
- 0.07 - oz.
Mounting torque 6.0 (5.0) - 12 (10) kgf · cm (lbf · in)
Marking device Case style TO-247AC modified (JEDEC) HFA16PB120

Page 3

PDF page 3 diagram

Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current

PDF page 3 diagram

Fig. 2 - Typical Values of Reverse Current vs.

Reverse Voltage

PDF page 3 diagram

Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage

PDF page 3 diagram

Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics

Page 4

PDF page 4 diagram

Fig. 5 - Typical Reverse Recovery Time vs. dIF/dt (Per Leg)

PDF page 4 diagram

Fig. 6 - Typical Recovery Current vs. dIF/dt (Per Leg)

PDF page 4 diagram

Fig. 7 - Typical Stored Charge vs. dIF/dt (Per Leg)

PDF page 4 diagram

Fig. 8 - Typical dI(rec)M/dt vs. dIF/dt (Per Leg)

Page 5

PDF page 5 diagram

Fig. 9 - Reverse Recovery Parameter Test Circuit

PDF page 5 diagram

Fig. 10 - Reverse Recovery Waveform and Definitions

Page 6

ORDERING INFORMATION TABLE

PDF page 6 diagram
VS- HF A 16 PB 120 PbF
1 2 3 4 5 6 7
PDF page 6 diagram
LINKS TO RELATED DOCUMENTS
Dimensions www.vishay.com/doc?95253
Part marking information www.vishay.com/doc?95255

Page 7

Outline Dimensions

DIMENSIONS in millimeters and inches

PDF page 7 diagram
SYMBOL MILLIMETERS INCHES NOTES 3 4 SYMBOL MILLIMETERS INCHES NOTES
MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX.
A 4.65 5.31 0.183 0.209 D2 0.51 1.30 0.020 0.051
A1 2.21 2.59 0.087 0.102 E 15.29 15.87 0.602 0.625 3
A2 1.50 2.49 0.059 0.098 E1 13.72 - 0.540 -
b 0.99 1.40 0.039 0.055 e 5.46 BSC 0.215 BSC
b1 0.99 1.35 0.039 0.053 K 2.54 0.010
b2 1.65 2.39 0.065 0.094 L 14.20 16.10 0.559 0.634
b3 1.65 2.37 0.065 0.094 L1 3.71 4.29 0.146 0.169
b4 2.59 3.43 0.102 0.135 N 7.62 BSC 0.3
b5 2.59 3.38 0.102 0.133 P 3.56 3.66 0.14 0.144
c 0.38 0.86 0.015 0.034 P1 - 6.98 - 0.275
c1 0.38 0.76 0.015 0.030 Q 5.31 5.69 0.209 0.224
D 19.71 20.70 0.776 0.815 R 4.52 5.49 1.78 0.216
D1 13.08 - 0.515 - S 5.51 BSC 0.217 BSC

Notes (1) Dimensioning and tolerance per ASME Y14.5M-1994 (2) Contour of slot optional (3) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Thermal pad contour optional with dimensions D1 and E1 (5) Lead finish uncontrolled in L1 (6) P to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) Outline conforms to JEDEC outline TO-247 with exception of dimension c

Revision: 21-Jun-11

Document Number: 95253

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Page 8

Legal Disclaimer Notice

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 91000 Revision: 11-Mar-11