HFA16PA60C IRF
Document overview
- PDF pages: 6
Technical content
Page 1
Bulletin PD-2.606 rev. B 05/01
HFA16PA60C
HEXFRED
Ultrafast, Soft Recovery Diode
TM

Features
- Ultrafast Recovery
- Ultrasoft Recovery
- Very Low IRRM
- Very Low Qrr
- Specified at Operating Conditions
Benefits
- Reduced RFI and EMI
- Reduced Power Loss in Diode and Switching

Transistor
- Higher Frequency Operation
- Reduced Snubbing
- Reduced Parts Count
Description
International Rectifier's HFA16PA60C is a state of the art center tap ultra fast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 600 volts and 8 amps per Leg continuous current, the HFA16PA60C is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultra fast recovery time, the HEXFRED product line features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to "snap-off" during the tb portion of recovery. The
HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED HFA16PA60C is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed.
Absolute Maximum Ratings (per Leg)
| Parameter | Max | Units | |
|---|---|---|---|
| VR | Cathode-to-Anode Voltage | 600 | V |
| IF @ TC = 100°C | Continuous Forward Current (per Leg) | 8 | A |
| IFSM | Single Pulse Forward Current | 60 | |
| IFRM | Maximum Repetitive Forward Current | 24 | |
| PD @ TC = 25°C | Maximum Power Dissipation | 36 | W |
| PD @ TC = 100°C | Maximum Power Dissipation | 14 | |
| TJ | Operating Junction and | -55 to +150 | °C |
| TSTG | Storage Temperature Range |
1
www.irf.com
Page 2
HFA16PA60C
Bulletin PD-2.606 rev. B 05/01
Electrical Characteristics (per Leg) @ TJ = 25°C (unless otherwise specified)
| Parameter | Min. | Typ. | Max. | Units | Test Conditions | |
|---|---|---|---|---|---|---|
| VBR | Cathode Anode Breakdown Voltage | 600 | V | IR = 100µA | ||
| VFM | Max Forward Voltage | 1.4 | 1.7 | V | IF = 8A IF = 16A See Fig. 1 IF = 8A, TJ = 125°C | |
| 1.7 | 2.1 | |||||
| 1.4 | 1.7 | |||||
| IRM | Max Reverse Leakage Current | 0.3 | 5 | µA | VR = VR Rated See Fig. 2 TJ = 125°C, VR = 0.8 x VR Rated D Rated | |
| 100 | 500 | |||||
| CT | Junction Capacitance | 10 | 25 | pF | VR = 200V See Fig. 3 | |
| LS | Series Inductance | 8.0 | nH | Measured lead to lead 5mm from package body |
Dynamic Recovery Characteristics (per Leg) @ TJ = 25°C (unless otherwise specified)

Thermal - Mechanical Characteristics
| Parameter | Min | Typ | Max | Units | |
|---|---|---|---|---|---|
| Tlead! | Lead Temperature | 300 | °C | ||
| RthJC | Junction-to-Case, Single Leg Conducting Junction-to-Case, Both Legs Conducting | 3.5 | K/W | ||
| 1.75 | |||||
| RthJA" | Thermal Resistance, Junction to Ambient | 40 | |||
| RthCS# | Thermal Resistance, Case to Heat Sink | 0.25 | |||
| Wt | Weight | 6 | g | ||
| 0.21 | (oz) | ||||
| Mounting Torque | 6 | 12 | Kg-cm | ||
| 5 | 10 | lbf•in |
! 0.063 in. from Case (1.6mm) for 10 sec " Typical Socket Mount # Mounting Surface, Flat, Smooth and Greased
www.irf.com
2
Page 3

Forward Voltage Drop - V (V)
FM
Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current, (per Leg)
HFA16PA60C
Bulletin PD-2.606 rev. B 05/01

Reverse Voltage - V (V)
R
Fig. 2 - Typical Reverse Current vs. Reverse Voltage, (per Leg)

Reverse Voltage - VR ( V ) Reverse Voltage - V (V)
R
Fig. 3 - Typical Junction Capacitance vs.

Page 4
HFA16PA60C
Bulletin PD-2.606 rev. B 05/01

di /dt - (A/µs) f
Fig. 5 - Typical Reverse Recovery vs. dif/dt,
(per Leg)

di /dt - (A/µs) f
Fig. 7 - Typical Stored Charge vs. dif/dt,
(per Leg)
4

di /dt - (A/µs) f
Fig. 6 - Typical Recovery Current vs. dif/dt,
(per Leg)

di /dt - (A/µs) f
Fig. 8 - Typical di(rec)M/dt vs. dif/dt, (per Leg)
www.irf.com
Page 5
HFA16PA60C
Bulletin PD-2.606 rev. B 05/01

REVERSE RECOVERY CIRCUIT

- dif/dt - Rate of change of current
- Qrr - Area under curve defined by trr and IRRM
through zero crossing
trr X IRRM
- IRRM - Peak reverse recovery current
Qrr = 2
- trr - Reverse recovery time measured from zero crossing point of negative
- di(rec)M/dt - Peak rate of change of
going IF to point where a line passing
current during tb portion of trr
through 0.75 IRRM and 0.50 IRRM extrapolated to zero current
Fig. 10 - Reverse Recovery Waveform and
Fig. 9 - Reverse Recovery Parameter Test
Definitions
Circuit
Ordering Information Table

www.irf.com
5
Page 6
HFA16PA60C
Bulletin PD-2.606 rev. B 05/01
Outline Table

Data and specifications subject to change without notice.
This product has been designed and qualified for Industrial Level.
Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 05/01
www.irf.com
6