HFA16PA120C IRF
Document overview
- PDF pages: 7
Technical content
Page 1
HEXFRED
TM
Features
- Ultrafast Recovery
- Ultrasoft Recovery
- Very Low IRRM
- Very Low Qrr
- Specified at Operating Conditions
Benefits
- Reduced RFI and EMI
- Reduced Power Loss in Diode and Switching Transistor
- Higher Frequency Operation
- Reduced Snubbing
- Reduced Parts Count
Description
Bulletin PD -2.361 rev. B 05/01
HFA16PA120C
Ultrafast, Soft Recovery Diode


International Rectifier's HFA16PA120C is a state of the art ultra fast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 1200 volts and 8 amps continuous current, the HFA16PA120C is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultra fast recovery time, the HEXFRED product line features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to "snap-off" during the tb portion of recovery. The
HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED HFA16PA120C is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed.
Absolute Maximum Ratings (per Leg)
| Parameter | Max | Units | |
|---|---|---|---|
| VR | Cathode-to-Anode Voltage | 1200 | V |
| IF @ TC = 100°C | Continuous Forward Current | 8 | A |
| IFSM | Single Pulse Forward Current | 130 | |
| IFRM | Maximum Repetitive Forward Current | 32 | |
| PD @ TC = 25°C | Maximum Power Dissipation | 73.5 | W |
| PD @ TC = 100°C | Maximum Power Dissipation | 29 | |
| TJ TSTG | Operating Junction and Storage Temperature Range | - 55 to 150 | °C |
1
www.irf.com
Page 2
HFA16PA120C
Bulletin PD-2.361 rev. B 05/01
Electrical Characteristics (per Leg) @ TJ = 25°C (unless otherwise specified)

! 0.063 in. from Case (1.6mm) for 10 sec "#Typical Socket Mount $ Mounting Surface, Flat, Smooth and Greased
www.irf.com
2
Page 3
HFA16PA120C
Bulletin PD-2.361 rev. B 05/01


0 300 600 900 1200
Reverse Voltage - VR (V) Fig. 2 - Typ. Values Of Reverse Current
specified)
Vs. Reverse Voltage

1 10 100 1000 10000
Forward Voltage Drop - VFM (V)
Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance
Fig. 1 - Max. Forward Voltage Drop Characteristics
Vs. Reverse Voltage

0.00001
0.0001
0.001
0.01
0.1
1
t1, Rectangular Pulse Duration (Seconds)
Fig. 4 - Max. Thermal Impedance Z thJC Characteristics
www.irf.com
3
Page 4
HFA16PA120C
Bulletin PD-2.361 rev. B 05/01

100
1000
di F /dt (A/µs ) Fig. 5 - Typical Reverse Recovery Vs. dif /dt

100
1000
di F /dt (A/µs ) Fig. 8 - Typical Stored Charge vs. dif /dt
4

100
1000
di F /dt (A/µs ) Fig. 6 - Typical Recovery Current Vs. dif /dt

100
1000
di F /dt (A/µs ) Fig. 7 - Typical di(REC) M/dt vs. dif /dt
www.irf.com
Page 5
HFA16PA120C
Bulletin PD-2.361 rev. B 05/01

Fig. 10 - Reverse Recovery Waveform and Definitions
www.irf.com
5
Page 6
HFA16PA120C
Bulletin PD-2.361 rev. B 05/01
Outline Table

Ordering Information Table

www.irf.com
6
Page 7
HFA16PA120C
Bulletin PD-2.361 rev. B 05/01
Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 05/01
www.irf.com
7