HFA120FA60P VISHAY
Document overview
- PDF pages: 7
Technical content
Page 1
Ultrafast Soft Recovery Diode, 60 A
FEATURES

- Fast recovery time characteristic
- Electrically isolated base plate
RoHS
- Large creepage distance between terminal
COMPLIANT
- Simplified mechanical designs, rapid assembly
- UL pending
- Totally lead (Pb)-free
- Designed for industrial level
DESCRIPTION
| PRODUCT SUMMARY | |
| V R | 600 V |
| V (typical) at 125 °C F | 1.4 V |
| Q (typical) rr | 270 nC |
| I (typical) RRM | 7.0 A |
| t (typical) rr | 65 ns |
| dI /dt (typical) at 125 °C (rec)M | 270 A/µs |
| I at T F(DC) C | 40 A at 100 °C |
This SOT-227 modules with HEXFRED® rectifier are available in two basic configurations. They are the antiparallel and the parallel configurations. The antiparallel configuration (HFA120EA60) is used for simple series rectifier and high voltage application. The parallel configuration (HFA120FA60) is used for simple parallel rectifier and high current application. The semiconductor in the SOT-227 package is isolated from the copper base plate, allowing for common heatsinks and compact assemblies to be built. These modules are intended for general applications such as power supplies, battery chargers, electronic welders, motor control, DC chopper, and inverters.
| ABSOLUTE MAXIMUM RATINGS PER LEG | ||||
|---|---|---|---|---|
| PARAMETER | SYMBOL | TEST CONDITIONS | VALUES | UNITS |
| Cathode to anode voltage | V R | 600 | V | |
| Continuous forward current | I F | T = 25 °C C | 75 | A |
| T = 100 °C C | 40 | |||
| Single pulse forward current | I FSM | TBD | ||
| Maximum repetitive forward current | I FRM | 180 | ||
| RMS isolation voltage, any terminal to case | V ISOL | t = 1 minute | 2500 | V |
| Maximum power dissipation | P D | T = 25 °C C | 180 | W |
| T = 100 °C C | 71 | |||
| Operating junction and storage temperature range | T, T J Stg | - 55 to 150 | °C | |
| ELECTRICAL SPECIFICATIONS PER LEG (T = 25 °C unless otherwise specified) J | |||||||
| PARAMETER | SYMBOL | TEST CONDITIONS | MIN. | TYP. | MAX. | UNITS | |
| Cathode to anode breakdown voltage | V BR | I = 100 µA R | 600 | - | - | V | |
| Maximum forward voltage | V FM | I = 60 A F | See fig. 1 | - | 1.5 | 1.7 | |
| I = 120 A F | - | 1.9 | 2.1 | ||||
| I = 60 A, T = 125 °C F J | - | 1.4 | 1.6 | ||||
| Maximum reverse leakage current | I RM | V = V rated R R | See fig. 2 | - | 2.5 | 20 | µA |
| T = 125 °C, V = 0.8 x V rated J R R | - | 130 | 2000 | ||||
| Junction capacitance | C T | V = 200 V R | See fig. 3 | - | 120 | 170 | pF |
Page 2
Diode, 60 A
| DYNAMIC RECOVERY CHARACTERISTICS PER LEG (T = 25 °C unless otherwise specified) J | |||||||
| PARAMETER | SYMBOL | TEST CONDITIONS | MIN. | TYP. | MAX. | UNITS | |
| Reverse recovery time See fig. 5, 6 and 16 | t rr | I = 1.0 A, dI /dt = 200 A/µs, V = 30 V F F R | - | 34 | - | ns | |
| t rr1 | T = 25 °C J | I = 60 A F dI /dt = 200 A/µs F V = 200 V R | - | 65 | 98 | ||
| t rr2 | T = 125 °C J | - | 130 | 200 | |||
| Peak recovery current See fig. 7 and 8 | I RRM1 | T = 25 °C J | - | 7.0 | 13 | A | |
| I RRM2 | T = 125 °C J | - | 13 | 23 | |||
| Reverse recovery charge See fig. 9 and 10 | Q rr1 | T = 25 °C J | - | 270 | 410 | nC | |
| Q rr2 | T = 125 °C J | - | 490 | 740 | |||
| Peak rate of recovery current during t b See fig. 11 and 12 | dI /dt1 (rec)M | T = 25 °C J | - | 350 | - | A/µs | |
| dI /dt2 (rec)M | T = 125 °C J | - | 270 | - | |||
| THERMAL - MECHANICAL SPECIFICATIONS | |||||
| PARAMETER | SYMBOL | MIN. | TYP. | MAX. | UNITS |
| Junction to case, single leg conducting | R thJC | - | - | 0.70 | °C/W K/W |
| Junction to case, both legs conducting | - | - | 0.35 | ||
| Case to sink, flat, greased surface | R thCS | - | 0.05 | - | |
| Weight | - | 30 | - | g | |
| Mounting torque | - | 1.3 | - | Nm | |
Page 3
Diode, 60 A

Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current (Per Leg)

Fig. 2 - Typical Reverse Current vs. Reverse Voltage (Per Leg)

Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg)

Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg)
Page 4
Diode, 60 A

Fig. 5 - Typical Reverse Recovery Time vs. dIF/dt (Per Leg)

Fig. 6 - Typical Recovery Current vs. dIF/dt (Per Leg)

Fig. 7- Typical Stored Charge vs. dIF/dt (Per Leg)

Fig. 8 - Typical dI(rec)M/dt vs. dIF/dt (Per Leg)
Page 5
Diode, 60 A

Fig. 9 - Reverse Recovery Parameter Test Circuit

Fig. 10 - Reverse Recovery Waveform and Definitions

Fig. 11 - Avalanche Test Circuit and Waveforms
Page 6
Diode, 60 A
ORDERING INFORMATION TABLE

| HF | A | 120 | FA | 60 | P |
| 1 2 3 4 5 6 | |||||

| LINKS TO RELATED DOCUMENTS | |
| Dimensions | http://www.vishay.com/doc?95036 |
| Packaging information | http://www.vishay.com/doc?95037 |
Page 7
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08