HFA04TB60 IRF
Document overview
- PDF pages: 6
Technical content
Page 1
Bulletin PD -2.399 rev. A 11/00
HFA04TB60
HEXFRED
Ultrafast, Soft Recovery Diode
TM


Features
- Ultrafast Recovery
- Ultrasoft Recovery
- Very Low IRRM
- Very Low Qrr
- Specified at Operating Conditions
Benefits
- Reduced RFI and EMI

- Reduced Power Loss in Diode and Switching Transistor
- Higher Frequency Operation
- Reduced Snubbing
- Reduced Parts Count
Description
International Rectifier's HFA04TB60 is a state of the art ultra fast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 600 volts and 8 amps per Leg continuous current, the HFA04TB60 is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultra fast recovery time, the HEXFRED product line features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to "snap-off" during the tb portion of recovery. The
HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED HFA04TB60 is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed.
Absolute Maximum Ratings
| Parameter | Max | Units | |
|---|---|---|---|
| VR | Cathode-to-Anode Voltage | 600 | V |
| IF @ TC = 100°C | Continuous Forward Current | 4.0 | A |
| IFSM | Single Pulse Forward Current | 25 | |
| IFRM | Maximum Repetitive Forward Current | 16 | |
| PD @ TC = 25°C | Maximum Power Dissipation | 25 | W |
| PD @ TC = 100°C | Maximum Power Dissipation | 10 | |
| TJ TSTG | Operating Junction and Storage Temperature Range | -55 to +150 | C |
1
Page 2
HFA04TB60
Bulletin PD-2.399 rev. A 11/00
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
| Parameter | Min | Typ | Max | Units | Test Conditions | |
|---|---|---|---|---|---|---|
| VBR | Cathode Anode Breakdown Voltage | 600 | V | IR = 100µA | ||
| VFM | Max Forward Voltage | 1.5 | 1.8 | V | IF = 4.0A IF = 8.0A See Fig. 1 IF = 4.0A, TJ = 125°C | |
| 1.8 | 2.2 | |||||
| 1.4 | 1.7 | |||||
| IRM | Max Reverse Leakage Current | 0.17 | 3.0 | µA | VR = VR Rated See Fig. 2 TJ = 125°C, VR = 0.8 x VR Rated D Rated | |
| 44 | 300 | |||||
| CT | Junction Capacitance | 4.0 | 8.0 | pF | VR = 200V See Fig. 3 | |
| LS | Series Inductance | 8.0 | nH | Measured lead to lead 5mm from package body |
Dynamic Recovery Characteristics @ TJ = 25°C (unless otherwise specified)

Thermal - Mechanical Characteristics
| Parameter | Min | Typ | Max | Units | |
|---|---|---|---|---|---|
| Tlead! | Lead Temperature | 300 | °C | ||
| RthJC | Thermal Resistance, Junction to Case | 5.0 | K/W | ||
| RthA" | Thermal Resistance, Junction to Ambient | 80 | |||
| RthS# | Thermal Resistance, Case to Heat Sink | 0.5 | |||
| Wt | Weight | 2.0 | g | ||
| 0.07 | (oz) | ||||
| T | Mounting Torque | 6.0 | 12 | Kg-cm | |
| 5.0 | 10 | lbf•in |
! 0.063 in. from Case (1.6mm) for 10 sec " Typical Socket Mount # Mounting Surface, Flat, Smooth and Greased
2
www.irf.com
Page 3

Forward Voltage Drop - V (V) Forward Voltage Drop - VFM ( V )
FM
Fig. 1 - Maximum Forward Voltage Drop
vs. Instantaneous Forward Current,
HFA04TB60
Bulletin PD-2.399 rev. A 11/00

Reverse Voltage - V (V)
R
Fig. 2 - Typical Reverse Current vs. Reverse
Voltage

Reverse Voltage - V (V)
R
Fig. 3 - Typical Junction Capacitance vs.

www.irf.com
3
Page 4
HFA04TB60
Bulletin PD-2.399 rev. A 11/00

di /dt - (A/µs) f
Fig. 5 - Typical Reverse Recovery vs. dif/dt

di /dt - (A/µs) f
Fig. 7 - Typical Stored Charge vs. dif/dt
4

di /dt - (A/µs) f
Fig. 6 - Typical Recovery Current vs. dif/dt

di /dt - (A/µs) f
Fig. 8 - Typical di(rec)M/dt vs. dif/dt,
www.irf.com
Page 5
0
REVERSE RECOVERY CIRCUIT

Fig. 9 - Reverse Recovery Parameter Test
Circuit
www.irf.com
HFA04TB60
Bulletin PD-2.399 rev. A 11/00
| F | 3 trr ta tb | |
| Qrr4 2 I RRM 0.5I RRM di(rec)M/dt 5 0.75 IRRM | ||
di /dt f
- Qrr - Area under curve defined by trr
- dif/dt - Rate of change of current
and IRRM
through zero crossing
trr X IRRM Qrr =
- IRRM - Peak reverse recovery current
2
- trr - Reverse recovery time measured
- di(rec)M/dt - Peak rate of change of
from zero crossing point of negative
current during tb portion of trr
going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current
Fig. 10 - Reverse Recovery Waveform and
Definitions
5
Page 6
HFA04TB60
Bulletin PD-2.399 rev. A 11/00

WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 U.S.A. Tel: (310) 322 3331. Fax: (310) 322 3332. EUROPEAN HEADQUARTERS: Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020. Fax: ++ 44 1883 733408. IR CANADA: 15 Lincoln Court, Brampton, Markham, Ontario L6T3Z2. Tel: (905) 453 2200. Fax: (905) 475 8801. IR GERMANY: Saalburgstrasse 157, 61350 Bad Homburg. Tel: ++ 49 6172 96590. Fax: ++ 49 6172 965933. IR ITALY: Via Liguria 49, 10071 Borgaro, Torino. Tel: ++ 39 11 4510111. Fax: ++ 39 11 4510220. IR FAR EAST: K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171. Tel: 81 3 3983 0086. IR SOUTHEAST ASIA: 1 Kim Seng Promenade, Great World City West Tower,13-11, Singapore 237994. Tel: ++ 65 838 4630.
IR TAIWAN: 16 Fl. Suite D.207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan. Tel: 886 2 2377 9936.
http://www.irf.com Fax-On-Demand: +44 1883 733420 Data and specifications subject to change without notice.
6