HEF4094B-Q100_V01 NEXPERIA

Document overview

  • PDF pages: 15

Technical content

Page 1

1. General description

The HEF4094B-Q100 is an 8-bit serial-in/serial or parallel-out shift register with a storage register and 3-state outputs. Both the shift and storage register have separate clocks. The device features a serial input (D) and two serial outputs (QS1 and QS2) to enable cascading. Data is shifted on the LOW-to-HIGH transitions of the CP input. Data is available at QS1 on the LOW-to-HIGH transitions of the CP input to allow cascading when clock edges are fast. The same data is available at QS2 on the next HIGH-to-LOW transition of the CP input to allow cascading when clock edges are slow. The data in the shift register is transferred to the storage register when the STR input is HIGH.

Data in the storage register appears at the outputs whenever the output enable input (OE) is HIGH. A LOW on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the registers. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VDD. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

2. Features and benefits

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1)
  • Specified from -40 °C to +85 °C and -40 °C to +125 °C
  • Fully static operation
  • 5 V, 10 V, and 15 V parametric ratings
  • Wide supply voltage range from 3.0 V to 15.0 V
  • CMOS low power dissipation
  • High noise immunity
  • Standardized symmetrical output characteristics
  • Complies with JEDEC standard JESD 13-B
  • ESD protection:
  • HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V
  • CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

3. Ordering information

Table 1. Ordering information All types operate from -40 °C to +125 °C.

Type number Package
Name Description Version
HEF4094BT-Q100 SO16 plastic small outline package; 16 leads; body width 3.9 mm SOT109-1
HEF4094BTT-Q100 TSSOP16 plastic thin shrink small outline package; 16 leads; body width 4.4 mm SOT403-1

Page 2

4. Functional diagram

D 2 8-STAGE SHIFT QS2 10 CP REGISTER 3 QS1 9 STR 8-BIT STORAGE 1 REGISTER OE 15 3-STATE OUTPUTS QP0 QP1 QP2 QP3 QP4 QP5 QP6 QP7 4 5 6 7 14 13 12 11 001aaf119 Fig. 1. Functional diagram 3 1 CP STR QS1 9 QS2 10 QP0 4 QP1 5 QP2 6 2 D QP3 7 QP4 14 QP5 13 QP6 12 QP7 11 OE 15 001aaf111 Fig. 2. Logic symbol
STAGE 0 STAGES 1 TO 6 STAGE 7 D D Q D Q D Q QS1 CP CP FF 0 FF 7 D Q QS2 CP CP LE LATCH D Q D Q LE LE LATCH 0 LATCH 7 STR OE QP0 QP2 QP4 QP6 001aag799 QP1 QP3 QP5 QP7 Fig. 3. Logic diagram

2 / 15

Page 3

5. Pinning information

5.1. Pinning

PDF page 3 diagram

5.2. Pin description

Table 2. Pin description

Symbol Pin Description
STR 1 strobe input
D 2 data input
CP 3 clock input
QP0 to QP7 4, 5, 6, 7, 14, 13, 12, 11 parallel output
V SS 8 ground supply voltage
QS1 9 serial output
QS2 10 serial output
OE 15 output enable input
V DD 16 supply voltage

3 / 15

Page 4

6. Functional description

Table 3. Function table H = HIGH voltage level; L = LOW voltage level; X = don’t care; Z = HIGH-impedance OFF-state; NC = no change; ↑ = positive-going transition; ↓ = negative-going transition; Q6S = the data in register stage 6 before the LOW to HIGH clock transition; Q7S = the data in register stage 7 before the HIGH to LOW clock transition.

Inputs Parallel outputs Serial outputs
CP OE STR D QP0 QPn QS1 QS2
↑ L X X Z Z Q6S NC
↓ L X X Z Z NC Q7S
↑ H L X NC NC Q6S NC
↑ H H L L QPn -1 Q6S NC
↑ H H H H QPn -1 Q6S NC
↓ H H H NC NC NC Q7S
PDF page 4 diagram

4 / 15

Page 5

7. Limiting values

Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to VSS = 0 V (ground).

Symbol Parameter Conditions Min Max Unit
V DD supply voltage -0.5 +18 V
I IK input clamping current V < -0.5 V or V > V + 0.5 V I I DD - ±10 mA
V I input voltage -0.5 V + 0.5 DD V
I OK output clamping current V < -0.5 V or V > V + 0.5 V O O DD - ±10 mA
I I/O input/output current - ±10 mA
I DD supply current - 50 mA
T stg storage temperature -65 +150 °C
T amb ambient temperature -40 +125 °C
P tot total power dissipation [1] - 500 mW
P power dissipation per output - 100 mW

[1] For SOT109-1 (SO16) package: Ptot derates linearly with 12.4 mW/K above 110 °C. For SOT403-1 (TSSOP16) package: Ptot derates linearly with 8.5 mW/K above 91 °C.

8. Recommended operating conditions

Table 5. Recommended operating conditions

Symbol Parameter Conditions Min Typ Max Unit
V DD supply voltage 3 - 15 V
V I input voltage 0 - V DD V
T amb ambient temperature in free air -40 - +125 °C
Δt/ΔV input transition rise and fall rate V = 5 V DD - - 3.75 μs/V
V = 10 V DD - - 0.5 μs/V
V = 15 V DD - - 0.08 μs/V

5 / 15

Page 6

9. Static characteristics

Table 6. Static characteristics VSS = 0 V; VI = VSS or VDD; unless otherwise specified.

Symbol Parameter Conditions V DD T = -40 °C amb T = +25 °C amb T = +85 °C amb T = +125 °C amb Unit
Min Max Min Max Min Max Min Max
V IH HIGH-level input voltage |I | < 1 μA O 5 V 3.5 - 3.5 - 3.5 - 3.5 - V
10 V 7.0 - 7.0 - 7.0 - 7.0 - V
15 V 11.0 - 11.0 - 11.0 - 11.0 - V
V IL LOW-level input voltage |I | < 1 μA O 5 V - 1.5 - 1.5 - 1.5 - 1.5 V
10 V - 3.0 - 3.0 - 3.0 - 3.0 V
15 V - 4.0 - 4.0 - 4.0 - 4.0 V
V OH HIGH-level output voltage |I | < 1 μA O 5 V 4.95 - 4.95 - 4.95 - 4.95 - V
10 V 9.95 - 9.95 - 9.95 - 9.95 - V
15 V 14.95 - 14.95 - 14.95 - 14.95 - V
V OL LOW-level output voltage |I | < 1 μA O 5 V - 0.05 - 0.05 - 0.05 - 0.05 V
10 V - 0.05 - 0.05 - 0.05 - 0.05 V
15 V - 0.05 - 0.05 - 0.05 - 0.05 V
I OH HIGH-level output current V = 2.5 V O 5 V - -1.7 - -1.4 - -1.1 - -1.1 mA
V = 4.6 V O 5 V - -0.64 - -0.5 - -0.36 - -0.36 mA
V = 9.5 V O 10 V - -1.6 - -1.3 - -0.9 - -0.9 mA
V = 13.5 V O 15 V - -4.2 - -3.4 - -2.4 - -2.4 mA
I OL LOW-level output current V = 0.4 V O 5 V 0.64 - 0.5 - 0.36 - 0.36 - mA
V = 0.5 V O 10 V 1.6 - 1.3 - 0.9 - 0.9 - mA
V = 1.5 V O 15 V 4.2 - 3.4 - 2.4 - 2.4 - mA
I OZ OFF-state output current QPn output is HIGH; V = 15 V O 15 V - 0.4 - 0.4 - 12 - 12 μA
I I input leakage current 15 V - ±0.1 - ±0.1 - ±1.0 - ±1.0 μA
I DD supply current all valid input combinations; I = 0 A O 5 V - 5 - 5 - 150 - 150 μA
10 V - 10 - 10 - 300 - 300 μA
15 V - 20 - 20 - 600 - 600 μA
C I input capacitance - - - 7.5 - - - - pF

6 / 15

Page 7

10. Dynamic characteristics

Table 7. Dynamic characteristics VSS = 0 V; Tamb = 25 °C; for test circuit see Fig. 10; unless otherwise specified.

Symbol Parameter Conditions V DD Extrapolation formula Min Typ Max Unit
t PHL HIGH to LOW propagation delay CP to QS1; see Fig. 6 5 V [1] 108 ns + (0.55 ns/pF)C L - 135 270 ns
10 V 54 ns + (0.23 ns/pF)C L - 65 130 ns
15 V 42 ns + (0.16 ns/pF)C L - 50 100 ns
CP to QS2; see Fig. 6 5 V 78 ns + (0.55 ns/pF)C L - 105 210 ns
10 V 39 ns + (0.23 ns/pF)C L - 50 100 ns
15 V 32 ns + (0.16 ns/pF)C L - 40 80 ns
CP to QPn; see Fig. 6 5 V 138 ns + (0.55 ns/pF)C L - 165 330 ns
10 V 64 ns + (0.23 ns/pF)C L - 75 150 ns
15 V 47 ns + (0.16 ns/pF)C L - 55 110 ns
STR to QPn; see Fig. 7 5 V 83 ns + (0.55 ns/pF)C L - 110 220 ns
10 V 39 ns + (0.23 ns/pF)C L - 50 100 ns
15 V 27 ns + (0.16 ns/pF)C L - 35 70 ns
t PLH LOW to HIGH propagation delay, CP to QS1; see Fig. 6 5 V [1] 78 ns + (0.55 ns/pF)C L - 105 210 ns
10 V 39 ns + (0.23 ns/pF)C L - 50 100 ns
15 V 32 ns + (0.16 ns/pF)C L - 40 80 ns
CP to QS2; see Fig. 6 5 V 78 ns + (0.55 ns/pF)C L - 105 210 ns
10 V 39 ns + (0.23 ns/pF)C L - 50 100 ns
15 V 32 ns + (0.16 ns/pF)C L - 40 80 ns
CP to QPn; see Fig. 6 5 V 123 ns + (0.55 ns/pF)C L - 150 300 ns
10 V 59 ns + (0.23 ns/pF)C L - 70 140 ns
15 V 47 ns + (0.16 ns/pF)C L - 55 110 ns
STR to QPn; see Fig. 7 5 V 73 ns + (0.55 ns/pF)C L - 100 200 ns
10 V 34 ns + (0.23 ns/pF)C L - 45 90 ns
15 V 27 ns + (0.16 ns/pF)C L - 35 70 ns
t t transition time 5 V [1] 10 ns + (1.00 ns/pF)C L - 60 120 ns
10 V 9 ns + (0.42 ns/pF)C L - 30 60 ns
15 V 6 ns + (0.28 ns/pF)C L - 20 40 ns
t PZH OFF-state to HIGH propagation delay OE to QPn; see Fig. 8 5 V - 40 80 ns
10 V - 25 50 ns
15 V - 20 40 ns
t PZL OFF-state to LOW propagation delay OE to QPn; see Fig. 8 5 V - 40 80 ns
10 V - 25 50 ns
15 V - 20 40 ns
t PHZ HIGH to OFF-state propagation delay OE to QPn; see Fig. 8 5 V - 75 150 ns
10 V - 40 80 ns
15 V - 30 60 ns
t PLZ LOW to OFF-state propagation delay OE to QPn; see Fig. 8 5 V - 80 160 ns
10 V - 40 80 ns
15 V - 30 60 ns

7 / 15

Page 8

Symbol Parameter Conditions V DD Extrapolation formula Min Typ Max Unit
t su set-up time D to CP; see Fig. 9 5 V 60 30 - ns
10 V 20 10 - ns
15 V 15 5 - ns
t h hold time D to CP; see Fig. 9 5 V +5 -15 - ns
10 V 20 5 - ns
15 V 20 5 - ns
t W pulse width minimum LOW clock pulse; see Fig. 6 5 V 60 30 - ns
10 V 30 15 - ns
15 V 24 12 - ns
minimum HIGH strobe pulse; see Fig. 7 5 V 40 20 - ns
10 V 30 15 - ns
15 V 24 12 - ns
f max maximum frequency see Fig. 6 5 V 5 10 - MHz
10 V 11 22 - MHz
15 V 14 28 - MHz

[1] The typical values of the propagation delay and transition times are calculated from the extrapolation formulas shown (CL in pF).

Table 8. Dynamic power dissipation VSS = 0 V; tr = tf ≤ 20 ns; Tamb = 25 °C.

Symbol Parameter V DD Typical formula for P (μW) D where:
P D dynamic power dissipation 5 V P = 2100 × f + Σ(f × C ) × V 2 D i o L DD f = input frequency in MHz, i f = output frequency in MHz, o C = output load capacitance in pF, L V = supply voltage in V, DD Σ(f × C ) = sum of the outputs. o L
10 V P = 9700 × f + Σ(f × C ) × V 2 D i o L DD
15 V P = 26000 × f + Σ(f × C ) × V 2 D i o L DD

10.1. Waveforms and test circuit

PDF page 8 diagram

8 / 15

Page 9

PDF page 9 diagram
PDF page 9 diagram
PDF page 9 diagram

9 / 15

Page 10

Table 9. Measurement points

Supply voltage Input Output
V DD V M V M V X V Y
5 V to 15 V 0.5V DD 0.5V DD 0.1V DD 0.9V DD
PDF page 10 diagram

Table 10. Test data

Supply voltage Input V EXT Load
V DD V I t, t r f t , t PHL PLH t , t PHZ PZH t , t PLZ PZL C L R L
5 V to 15 V V or V SS DD ≤ 20 ns open V SS V DD 50 pF 1 kΩ

11. Application information

Some examples of applications for the HEF4094B-Q100 are:

  • Serial-to-parallel data conversion
  • Remote control holding register
PDF page 10 diagram

10 / 15

Page 11

12. Package outline

SO16: plastic small outline package; 16 leads; body width 3.9 mm

SOT109-1

PDF page 11 diagram

Fig. 12. Package outline SOT109-1 (SO16)

11 / 15

Page 12

TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm

SOT403-1

PDF page 12 diagram

Fig. 13. Package outline SOT403-1 (TSSOP16)

12 / 15

Page 13

13. Abbreviations

Table 11. Abbreviations

Acronym Description
ANSI American National Standards Institute
CDM Charged Device Model
CMOS Complementary Metal-Oxide Semiconductor
DUT Device Under Test
ESD ElectroStatic Discharge
ESDA ElectroStatic Discharge Association
HBM Human Body Model
JEDEC Joint Electron Device Engineering Council

14. Revision history

Table 12. Revision history

Document ID Release date Data sheet status Change notice Supersedes
HEF4094B_Q100 v.6 20240905 Product data sheet - HEF4094B_Q100 v.5
Modifications: • Section 2: ESD specification updated according to the latest JEDEC standard. • Fig. 12, Fig. 13: Aligned SO and TSSOP package outline drawings to JEDEC MS-012 and MO-153
HEF4094B_Q100 v.5 20210708 Product data sheet - HEF4094B_Q100 v.4
Modifications: • Section 1 and Section 2 updated. • Section 7: Derating values for P total power dissipation updated. tot
HEF4094B_Q100 v.4 20181114 Product data sheet - HEF4094B_Q100 v.3
Modifications: • The format of this data sheet has been redesigned to comply with the identity guidelines of Nexperia. • Legal texts have been adapted to the new company name where appropriate. • Fig. 5 corrected.
HEF4094B_Q100 v.3 20130704 Product data sheet - HEF4094B_Q100 v.2
Modifications: • Fig. 3 corrected (errata).
HEF4094B_Q100 v.2 20130606 Product data sheet - HEF4094B_Q100 v.1
Modifications: • added type number HEF4094BTT-Q100.
HEF4094B_Q100 v.1 20120807 Product data sheet - -

13 / 15

Page 14

15. Legal information

Data sheet status

Document status [1][2] Product status [3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product development.
Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.

[1] Please consult the most recently issued document before initiating or completing a design. [2] The term 'short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the internet at https://www.nexperia.com.

Definitions

Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.

Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between Nexperia and its customer, unless Nexperia and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the Nexperia product is deemed to offer functions and qualities beyond those described in the Product data sheet.

Disclaimers

Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia takes no responsibility for the content in this document if provided by an information source outside of Nexperia.

In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory.

Notwithstanding any damages that customer might incur for any reason whatsoever, Nexperia’s aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of Nexperia.

Right to make changes — Nexperia reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof.

Suitability for use in automotive applications — This Nexperia product has been qualified for use in automotive applications. Unless otherwise agreed in writing, the product is not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or

equipment, nor in applications where failure or malfunction of an Nexperia product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Nexperia and its suppliers accept no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk.

Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding.

Applications — Applications that are described herein for any of these products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification.

Customers are responsible for the design and operation of their applications and products using Nexperia products, and Nexperia accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the Nexperia product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products.

Nexperia does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using Nexperia products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). Nexperia does not accept any liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device.

Terms and conditions of commercial sale — Nexperia products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nexperia.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. Nexperia hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of Nexperia products by customer.

No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights.

Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities.

Translations — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions.

Trademarks

Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners.

14 / 15

Page 15

Contents

  1. General description......................................................1 2. Features and benefits.................................................. 1 3. Ordering information....................................................1 4. Functional diagram.......................................................2 5. Pinning information......................................................3 5.1. Pinning.........................................................................3 5.2. Pin description.............................................................3 6. Functional description................................................. 4 7. Limiting values............................................................. 5
  1. Recommended operating conditions..........................5 9. Static characteristics....................................................6 10. Dynamic characteristics............................................ 7 10.1. Waveforms and test circuit........................................ 8 11. Application information............................................10 12. Package outline........................................................ 11 13. Abbreviations............................................................13 14. Revision history........................................................13 15. Legal information......................................................14

For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 5 September 2024

15 / 15