HCPL4502SD FAIRCHILD
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 12
Technical content
Features
High speed –1 MBit/s Superior CMR – 10kV/µs Dual-Channel HCPL2530/HCPL2531 Double working voltage – 480V RMS CTR guaranteed 0–70°C U.L. recognized (File # E90700)
Applications
Pulse transformer replacement Output interface to CMOS-LSTTL-TTL Wide bandwidth analog coupling
Description
The HCPL4502, HCPL2503, 6N135, 6N136, HCPL2530 and HCPL2531 optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor. A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. An internal noise shield provides superior common mode rejection of 10kV/µs. An improved package allows superior insulation permitting a 480V working voltage compared to industry standard of 220V. Schematics Package Outlines 4 5 VF1 VCC V01 V02 GND VF2 HCPL2530/HCPL2531 4 5 VF VCC VB VO GNDN/C N/C 6N135, 6N136, HCPL2503, HCPL4502 Pin 7 is not connected in Part Number HCPL4502
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 2 Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers Absolute Maximum Ratings A = 25°C unless otherwise specified) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Notes: 1. Derate linearly above 70°C free-air temperature at a rate of 0.8mA/°C. 2. Derate linearly above 70°C free-air temperature at a rate of 1.6mA/°C. 3. Derate linearly above 70°C free-air temperature at a rate of 0.9 mW/°C. 4. Derate linearly above 70°C free-air temperature at a rate of 2.0 mW/°C. Symbol Parameter Condition Value Units T STG Storage Temperature -55 to +125 °C T OPR Operating Temperature -55 to +100 °C T SOL Lead Solder Temperature 260 for 10 sec °C EMITTER I F (avg) DC/Average Forward Input Current Each Channel (1) 25 mA I F (pk) Peak Forward Input Current Each Channel (2) 50% duty cycle, 1ms P .W. 50 mA I F (trans) Peak Transient Input Current Each Channel 1µs P .W., 300pps 1.0 A V R Reverse Input Voltage Each Channel P D Input Power Dissipation Each Channel 6N135/6N136 and HCPL2503/4502 100 mW HCPL-2530/253 (3) DETECTOR I O (avg) Average Output Current Each Channel 8 mA I O (pk) Peak Output Current Each Channel 16 mA V EBR Emitter-Base Reverse Voltage 6N135, 6N136 and HCPL2503 only 5 V V CC Supply Voltage -0.5 to 30 V V O Output Voltage -0.5 to 20 V I B Base Current 6N135, 6N136 and HCPL2503 only 5 mA PD Output Power Dissipation Each Channel 6N135, 6N136, HCPL2503, HCPL4502 (4) 100 mW HCPL2530, HCPL2531 35 mW
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 3 Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Electrical Characteristics
A = 0 to 70°C Unless otherwise specified) Individual Component Characteristics *All Typicals at T A = 25°C Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit EMITTER V F Input Forward Voltage I F = 16mA, T A =25°C 1.45 1.7 V I F = 16mA 1.8 B VR Input Reverse Breakdown Voltage I R = 10 µA 5.0 V V F T A Temperature Coefficient of Forward Voltage I F = 16mA -1.6 mV/°C DETECTOR I OH Logic High Output Current I F = 0mA, V O = V CC = 5.5V, T A =25°C All 0.001 0.5 µA I F = 0mA, V O = V CC = 15V, T A =25°C 6N135 6N136 HCPL4502 HCPL2503 0.005 1 I F = 0mA, V O = V CC = 15V All 50 I CCL Logic Low Supply Current I F = 16mA, V O = Open, V CC = 15V 6N135 6N136 HCPL4502 HCPL2503 120 200 µA I = I = 16mA, V O = Open, V CC = 15V HCPL2530 HCPL2531 200 400 I CCH Logic High Supply Current I F = 0mA, V O = Open, V CC = 15V, T A =25°C 6N135 6N136 HCPL4502 HCPL2503 1µ A I F = 0mA, V O = Open, V CC = 15V 6N135 6N136 HCPL4502 HCPL2503 I F = 0mA, V O = Open, V CC = 15V HCPL2530 HCPL2531 0.02 4
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 4 Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers (Continued) (T A = 0 to 70°C unless otherwise specified) Transfer Characteristics *All Typicals at T A = 25°C Note: 5. Current Transfer Ratio is defined as a ratio of output collector current, I O , to the forward LED input current, I F times 100%. Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit COUPLED CTR Current Transfer Ratio (5) I F = 16mA, V O = 0.4 V, V CC = 4.5V, T A =25°C 6N135 HCPL2530 71 8 5 0 % 6N136 HCPL4502 HCPL2531 19 27 50 % HCPL2503 12 27 % I F = 16mA, V CC = 4.5V V OL = 0.4V 6N135 5 21 % V OL = 0.5V HCPL2530 V OL = 0.4V 6N136 HCPL4502 15 30 % V OL = 0.5V HCPL2531 V OL = 0.4V HCPL2503 9 30 % V OL Logic LOW Output Voltage I F = 16mA, I O = 1.1mA, V CC = 4.5V, T A =25°C 6N135 0.18 0.4 V HCPL2530 0.18 0.5 I F = 16mA, I O = 3mA, V CC = 4.5V, T A =25°C 6N136 HCPL2503 0.25 0.4 HCPL2531 0.25 0.5 I F = 16mA, I O = 0.8mA, V CC = 4.5V 6N135 HCPL2530 0.5 I F = 16mA, I O = 2.4mA, V CC = 4.5V HCPL4502 HCPL2531 0.5
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 5 Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers (Continued) (T A = 0 to 70°C unless otherwise specified) Switching Characteristics (VCC = 5V) ** All Typicals at TA = 25°C Notes: 8. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common mode pulse signal V CM, to assure that the output will remain in a logic high state (i.e., V O > 2.0V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO < 0.8V). Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit TPHL Propagation Delay Time to Logic LOW T A = 25°C, RL = 4.1kΩ, IF = 16mA(6) (Fig. 7) 6N135 HCPL2530 0.45 1.5 µs RL = 1.9kΩ, IF = 16mA, TA = 25°C(7) (Fig. 7) 6N136 HCPL4502 HCPL2503 HCPL2531 0.45 0.8 µs R L = 4.1kΩ, IF = 16mA(6) (Fig. 7) 6N135 HCPL2530 2.0 µs RL = 1.9kΩ, IF = 16mA(7) (Fig. 7) 6N136 HCPL4502 HCPL2503 HCPL2531 1.0 µs T PLH Propagation Delay Time to Logic HIGH T A = 25°C, (RL = 4.1kΩ, IF = 16mA(6) (Fig. 7) 6N135 HCPL2530 0.5 1.5 µs RL = 1.9kΩ, IF = 16mA(7) (Fig. 7) TA = 25°C 6N136 HCPL4502 HCPL2503 HCPL2531 0.3 0.8 µs R L = 4.1kΩ, IF = 16mA(6) (Fig. 7) 6N135 HCPL2530 2.0 µs RL = 1.9kΩ, IF = 16mA(7) (Fig. 7) 6N136 HCPL4502 HCPL2503 HCPL2531 1.0 µs |CM H| Common Mode Transient Immunity at Logic High I F = 0mA, VCM = 10VP-P, RL = 4.1kΩ, TA = 25°C(8) (Fig. 8) 6N135 HCPL2530 10,000 V/µs IF = 0mA, VCM = 10VP-P, RL = 1.9kΩ, TA = 25°C(8) (Fig. 8) 6N136 HCPL4502 HCPL2503 HCPL2531 10,000 V/µs |CM L| Common Mode Transient Immunity at Logic Low I F = 16mA, VCM = 10 VP-P, RL = 4.1kΩ, TA = 25°C(8) (Fig. 8) 6N135 HCPL2530 10,000 V/µs IF = 16mA, VCM = 10 VP-P, RL = 1.9kΩ(8) (Fig. 8) 6N136 HCPL4502 HCPL2503 HCPL2531 10,000 V/µs
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 6 Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers Electrical Characteristics (Continued) (TA = 0 to 70°C unless otherwise specified) Isolation Characteristics (TA = 0 to 70°C Unless otherwise specified) Notes: 9. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted together. 10. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together. Symbol Characteristics Test Conditions Min Typ** Max Unit II-O Input-Output Insulation Leakage Current Relative humidity = 45%, TA = 25°C, t = 5s, VI-O = 3000 VDC(9) 1.0 µA VISO Withstand Insulation Test Voltage RH ≤ 50%, TA = 25°C, II-O ≤ 2µA, t = 1 min.(9)
2500 V RMS
RI-O Resistance (Input to Output) V I-O = 500VDC(9) 1012 Ω CI-O Capacitance (Input to Output) f = 1MHz (9) 0.6 pF HFE DC Current Gain I O = 3mA, VO = 5V(9) 150 II-I Input-Input Insulation Leakage Current RH ≤ 45%, VI-I = 500VDC(10) t = 5 s, (HCPL2530/2531 only) 0.005 µA RI-I Input-Input Resistance V I-I = 500 VDC(10) (HCPL2530/2531 only) 1011 Ω CI-I Input-Input Capacitance f = 1MHz) (10) (HCPL2530/2531 only) 0.03 pF
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 7 Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers Typical Performance Curves Fig. 1 Normalized CTR vs. Forward Current IF - FORWARD CURRENT (mA) 0.1 1 10 100 NORMALIZED CTR 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Fig. 2 Normalized CTR vs. Temperature TA - TEMPERATURE (°C) -60 -40 -20 0 20 40 60 80 100 NORMALIZED CTR 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Fig. 3 Output Current vs. Output Voltage VO – OUTPUT VOLTAGE (V) 02468 1 0 1 2 1 41 61 82 0 IO – OUTPUT CU RRENT (mA) IF = 5mA IF = 10mA IF = 15mA IF = 20mA IF = 25mA IF = 30mA IF = 35mA IF = 40mA Normalized to: IF = 16 mA VO = 0.4 V VCC = 5 V TA = 25°C Normalized to: TA = 25°C IF = 16mA VCC = 5 V VO = 0.4 V Fig. 4 Logic High Output Current vs. Temperature TA – TEMPERATURE (°C) -60 -40 -20 0 20 40 60 80 100 IOH – LOGIC HIGH OUTP UT CURRENT (nA) 0.1 100 1000 Fig. 5 Propagation Delay vs. Temperature TA – TEMPERATURE (°C) -60 -40 -20 0 20 40 60 80 100 Tp – PROPAGATION DELA Y (ns) 100 200 300 400 500 600 700 800 RL = 1.9kΩ (TPHL) R = 4.1kΩ (TPLH)L RL = 1.9kΩ (TPLH) RL = 4.1kΩ (TPLH) Fig. 6 Propagation Delay vs. Load Resistance RL – LOAD RESISTANCE (kΩ) 1 10 TP - PROPAGA TION DELA Y (ns) 100 1000 10000 IF - 16mA (TPHL) IF - 10mA (TPHL) IF - 10mA (TPLH) IF - 16mA (TPLH) TA = 25°C VCC = 5 V IF = 0 mA VCC = 5 V VO = 5 V IF = 16mA VCC = 5 V VCC = 5 V TA = 25°C
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 8 Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers Test Circuits Pulse Gen CMV VFF B A +5 V OV IF FV Shield Noise O GND V BV CCV LR PLH OLV VO 5 V 1.5 V FI 1.5 V TPHLT Switch at A : I = 0 mAF Switch at A : I = 16 mAF tr VO OV OLV 5 V
0 V 10% 10%
90%CMV 10 V 4 5 Noise Shield +5 V OV VCC V01 V02 GND VF1 F2V FI + 10% DUTY CYCLE I/f < 100µS FI MONITOR LR C = 1.5 µFL Pulse Generator tr = 5ns Z = 50O Ω GND+ 4 5 F2V VF1 Shield Noise +5 V CC V L V V R VO VCM A B Pulse Gen FI I MonitorF I/f < 100µs 10% D.C. tr = 5ns Generator Pulse Z = 50O VF I Ω F Shield Noise VO O
5 GND
V BV LR CCV +5 V 0.1 µF LC = 1.5 µF Test Circuit for 6N135, 6N136, HCPL-2503 and HCPL- 4502 0.1 µF Test Circuit for HCPL-2530 and HCPL-2531 Test Circuit for 6N135, 6N136, HCPL-2503 and HCPL-4502 Test Circuit for HCPL-2530 and HCPL-2531 ft 0.1 µF 0.1 µF FFV mR mR 90% Fig. 7 Switching Time Test Circuit Fig. 8 Common Mode Immunity Test Circuit
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 9 Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers Package Dimensions Through Hole Surface Mount Note: All dimensions are in inches (millimeters) 0.4" Lead Spacing 8-Pin DIP – Land Pattern 0.200 (5.08) 0.140 (3.55) 0.100 (2.54) TYP 0.022 (0.56) 0.016 (0.41) 0.020 (0.51) MIN 0.390 (9.91) 0.370 (9.40) 0.270 (6.86) 0.250 (6.35) 0.070 (1.78) 0.045 (1.14) 241 56 7 8 0.300 (7.62) TYP 0.154 (3.90) 0.120 (3.05) 0.016 (0.40) 0.008 (0.20) 15° MAX PIN 1 ID. SEATING P LANE Lead Coplanarity : 0.004 (0.10) MAX 0.270 (6.86) 0.250 (6.35) 0.390 (9.91) 0.370 (9.40) 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0.020 (0.51) MIN 0.070 (1.78) 0.045 (1.14) 0.300 (7.62) TYP 0.405 (10.30) MAX. 0.315 (8.00) MIN 0.045 (1.14) 32 14 56 7 8 0.016 (0.41) 0.008 (0.20) PIN 1 ID. 0.200 (5.08) 0.140 (3.55) 0.100 (2.54) TYP 0.022 (0.56) 0.016 (0.41) 0.004 (0.10) MIN 0.390 (9.91) 0.370 (9.40) 0.270 (6.86) 0.250 (6.35) 0.070 (1.78) 0.045 (1.14) 241 56 7 8 0.400 (10.16) TYP 0.154 (3.90) 0.120 (3.05) 0.016 (0.40) 0.008 (0.20) 0° to 15° PIN 1 ID. SEATING PLANE 0.070 (1.78) 0.060 (1.52) 0.030 (0.76) 0.100 (2.54) 0.295 (7.49) 0.415 (10.54)
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 10 Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Ordering Information
Option Example Part Number Description S 6N135S Surface Mount Lead Bend SD 6N135SD Surface Mount; Tape and reel W 6N135W 0.4" Lead Spacing V 6N135V VDE0884 WV 6N135WV VDE0884; 0.4” lead spacing SV 6N135SV VDE0884; surface mount SDV 6N135SDV VDE0884; surface mount; tape and reel 43 5 Definitions 1F airchild logo 2D evice number
3 VDE mark (Note: Only appears on parts ordered with VDE option –
See order entry table) 4T wo digit year code, e.g., ‘03’ 5T wo digit work week ranging from ‘01’ to ‘53’
6 Assembly package code
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 11 Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers Tape Specifications Reflow Profile 4.0 ± 0.1 Ø1.55 ± 0.05 User Direction of Feed 4.0 ± 0.1 1.75 ± 0.10 7.5 ± 0.1 16.0 ± 0.3 12.0 ± 0.1 0.30 ± 0.05 13.2 ± 0.2 4.90 ± 0.20 0.1 MAX 10.30 ± 0.20 10.30 ± 0.20 Ø1.6 ± 0.1
- Peak reflow temperature: 225 C (package surface temperature)
- Time of temperature higher than 183 C for 60–150 seconds
- One time soldering reflow is recommended
215 C, 10–30 s
225 C peak
Time (Minute) 300 250 200 150 100 Temperature (°C) Time above 183 C, 60–150 sec Ramp up = 3 C/sec
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 12 TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries,a n dis not intended to be an exhaustive list of all such trademarks. Build it Now™ CorePLUS™ CorePOWER™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK EfficentMax™ EZSWITCH™ * Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FlashWriter®* FPS™ F-PFS™ FRFET® Global Power Resource SM Green FPS™ Green FPS™e-Series™ GTO™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ MotionMax™ Motion-SPM™ OPTOLOGIC OPTOPLANAR® PDP SPM™ Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ Quiet Series™ RapidConfigure™ Saving our world, 1mW at a time™ SmartMax™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™ -3 SuperSOT™ -6 SuperSOT™ -8 SupreMOS™ SyncFET™ TheP ower Franchise® TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC® Ultra FRFET™ UniFET™ VCX™ VisualMax™ *E ZSWITCH™ and FlashWriter ® are trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICHCOVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technicala nd product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Prod uct Status Definition Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I35 Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers