6N138M FAIRCHILD

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 14

Technical content

Features

Low current – 0.5mA Superior CTR-2000% Superior CMR-10kV/µs CTR guaranteed 0–70°C U.L. recognized (File # E90700, Vol. 2) VDE recognition (pending) – Ordering option V, e.g., 6N138VM Dual Channel – HCPL2730M, HCPL2731M (coming soon)

Applications

Digital logic ground isolation Telephone ring detector EIA-RS-232C line receiver High common mode noise line receiver µP bus isolation Current loop receiver

Description

The 6N138M/9M and HCPL2730M/31M optocouplers consist of an AlGaAs LED optically coupled to a high gain split darlington photodetector. The split darlington configuration separating the input photodiode and the first stage gain from the output transistor permits lower output saturation voltage and higher speed operation than possible with conventional darlington phototransistor optocoupler. In the dual channel devices, HCPL2730M/HCPL2731M, an inte- grated emitter-base resistor provides superior stability over temperature. The combination of a very low input current of 0.5mA and a high current transfer ratio of 2000% makes this family particularly useful for input interface to MOS, CMOS, LSTTL and EIA RS232C, while output compati- bility is ensured to CMOS as well as high fan-out TTL requirements. An internal noise shield provides excep- tional common mode rejection of 10 kV/µs. Related Resources www.fairchildsemi.com/products/opto/ www.fairchildsemi.com/pf/HC/HCPL0700.html www.fairchildsemi.com/pf/HC/HCPL0730.html www.fairchildsemi.com/pf/HC/HCPL0731.html Schematic Package Outlines 4 5 VF VCC VB VO GND 6N138M / 6N139M N/C N/C 4 5 VF1 VCC V01 V02 GND HCPL2730M / HCPL2731M VF2

©2009 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.0.2 2 6N138M, 6N139M, HCPL2730M, HCPL2731M — Low Input Current High Gain Split Darlington Optocouplers Absolute Maximum Ratings A = 25°C unless otherwise specified) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Note: 1. No derating required for devices operated within the T OPR specification (6N138 and 6N139 only). HCPL2730 and HCPL2731 derating TBD. Symbol Parameter Value Units T STG Storage Temperature -40 to +125 °C T OPR Operating Temperature -40 to +100 °C T SOL Lead Solder Temperature (Wave solder only. See recommended reflow profile graph on page 13 for SMD mounting) 260 for 10 sec °C EMITTER I F (avg) DC/Average Forward Input Current Each Channel 20 mA I F (pk) Peak Forward Input Current (50% duty cycle, 1 ms P .W.) Each Channel 40 mA I F (trans) Peak Transient Input Current – ( 1µs P .W., 300 pps) 1.0 A V R Reverse Input Voltage Each Channel 5 V P D Input Power Dissipation (1) Each Channel 35 mW DETECTOR I O (avg) Average Output Current Each Channel 60 mA V ER Emitter-Base Reverse Voltage 6N138M and 6N139M 0.5 V V CC , V O Supply Voltage, Output Voltage 6N138M and HCPL2730M -0.5 to 7 V 6N139M and HCPL2731M -0.5 to 18 P O Output Power Dissipation (1) Each Channel 100 mW

©2009 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.0.2 3 6N138M, 6N139M, HCPL2730M, HCPL2731M — Low Input Current High Gain Split Darlington Optocouplers

Electrical Characteristics

A = 0 to 70°C unless otherwise specified. Typical value is measured at T A = 25ºC and V CC = 5.0V. Individual Component Characteristics Transfer Characteristics Symbol Parameter Test Conditions Device Min. Typ. Max. Unit EMITTER V F Input Forward Voltage T A = 25°C All 1.30 1.7 V Each channel (I F = 1.6mA) 1.75 BV R Input Reverse Breakdown Voltage T A = 25°C, I R = 10µA All 5.0 19 V V F T A Temperature Coefficient of Forward Voltage I F = 1.6mA All -1.94 mV/°C DETECTOR I OH Logic HIGH Output Cur- rent I F = 0mA, V O = V CC = 18V 6N139M 0.0036 100 µA Each Channel HCPL2731M I F = 0mA, V O = V CC = 7V 6N138M 0.001 250 Each Channel HCPL2730M I CCL Logic LOW supply I F = 1.6mA, V O = Open, V CC = 18V 6N138M, 6N139M 0.4 1.5 mA I = I = 1.6mA, V = V = Open V CC = 18V HCPL2731M 3 V CC = 7V HCPL2730M I CCH Logic HIGH Supply I F = 0mA, V O = Open, V CC = 18V 6N138M, 6N139M 0.0003 10 µA I = I = 0mA, V = V = Open V CC = 18V HCPL2731M 20 V CC = 7V HCPL2730M Symbol Parameter Test Conditions Device Min. Typ. Max. Unit COUPLED CTR Current Transfer Ratio (2)(3) I F = 0.5mA, V O = 0.4 V, V CC = 4.5V 6N139M 400 2000 % Each Channel HCPL2731M I F = 1.6mA, V O = 0.4 V, V CC = 4.5V 6N139M 500 1600 Each Channel HCPL2731M I F = 1.6mA, V O = 0.4 V, V CC = 4.5V 6N138M 300 1600 Each Channel HCPL2730M V OL Logic LOW Output Voltage (3) I F = 0.5mA, I O = 2mA, V CC = 4.5V 6N139M 0.05 0.4 V I F = 1.6mA, I O = 8mA, V CC = 4.5V 6N139M 0.093 0.4 Each Channel HCPL2731M I F = 5mA, I O = 15mA, V CC = 4.5V 6N139M 0.13 0.4 Each Channel HCPL2731M I F = 12mA, I O = 24mA, V CC = 4.5V 6N139M 0.18 0.4 Each Channel HCPL2731M I F = 1.6mA, I O = 4.8mA, V CC = 4.5V 6N138M 0.06 0.4 Each Channel HCPL2730M

©2009 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.0.2 4 6N138M, 6N139M, HCPL2730M, HCPL2731M — Low Input Current High Gain Split Darlington Optocouplers (Continued) A = 0 to 70°C unless otherwise specified. Typical value is measured at T A = 25ºC and V CC = 5.0V. Switching Characteristics CC = 5V) Symbol Parameter Test Conditions Device Min. Typ. Max. Unit t PHL Propagation Delay Time to Logic LOW (3) (Fig. 12) RL = 4.7kΩ, IF = 0.5mA 6N139M 30 µs TA = 25°C 2.5 25 RL = 4.7kΩ, IF = 0.5mA HCPL2731M 120 Each Channel T A = 25°C 100 RL = 270Ω, IF = 12mA 6N139M 2 TA = 25°C 0.24 1 RL = 270Ω, IF = 12mA, Each Channel HCPL2730M 3 TA = 25°C HCPL2731M 2 RL = 2.2kΩ, IF = 1.6mA 6N138M 15 TA = 25°C 1 10 RL = 2.2kΩ, IF = 1.6mA, Each Channel HCPL2731M HCPL2730M TA = 25°C 20 tPLH Propagation Delay Time to Logic HIGH (3) (Fig. 12) RL = 4.7kΩ, IF = 0.5mA 6N139M 90 µs Each Channel HCPL2731M RL = 4.7kΩ, IF = 0.5mA, TA = 25°C 6N139M 13.6 60 Each Channel HCPL2731M RL = 270Ω, IF = 12mA 6N139M 10 TA = 25°C 1.3 7 RL = 270Ω, IF = 12mA, Each Channel HCPL2730M HCPL2731M TA = 25°C 10 RL = 2.2kΩ, IF = 1.6mA 6N138M 50 Each Channel HCPL2730M HCPL2731M RL = 2.2kΩ, IF = 1.6mA, TA = 25°C 6N138M 7.3 35 Each Channel HCPL2730M HCPL2731M |CMH| Common Mode Transient Immunity at Logic HIGH (4) (Fig. 13) IF = 0mA, |VCM| = 10VP-P, TA = 25°C, RL = 2.2kΩ 6N138M 6N139M 1,000 10,000 V/µs Each Channel HCPL2730M HCPL2731M |CML| Common Mode Transient Immunity at Logic LOW (4) (Fig. 13) (IF = 1.6mA, |VCM| = 10VP-P, RL = 2.2kΩ) TA = 25°C 6N138M 6N139M 1,000 10,000 V/µs Each Channel HCPL2730M HCPL2731M

©2009 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.0.2 5 6N138M, 6N139M, HCPL2730M, HCPL2731M — Low Input Current High Gain Split Darlington Optocouplers Electrical Characteristics (Continued) (TA = 0 to 70°C unless otherwise specified. Typical value is measured at TA = 25ºC and VCC = 5.0V.) Isolation Characteristics Notes: 2. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%. 3. Pin 7 open. (6N138M and 6N139M only) 4. Common mode transient immunity in logic HIGH level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common mode pulse signal VCM, to assure that the output will remain in a logic HIGH state (i.e., VO > 2.0V). Common mode transient immunity in logic LOW level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic LOW state (i.e., VO < 0.8V). 5. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted together. 6. For dual channel devices, CI-O is measured by shorting pins 1 and 2 or pins 3 and 4 together and pins 5 through 8 shorted together. 7. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together. I Symbol Characteristics Test Conditions Min. Typ. Max. Unit VISO Withstand Insulation Test Voltage(5) RH ≤ 50%, TA = 25°C, II-O ≤ 10µA, 50Hz, t = 1 min.

5000 V RMS

RI-O Resistance (Input to Output)(5) VI-O = 500VDC 10 11 Ω CI-O Capacitance (Input to Output)(5)(6) f = 1MHz, VI-O = 500V 1 pF II-I Input-Input Insulation Leakage Current(7) RH ≤ 45%, VI-I = 500VDC, t = 5s, HCPL2730M/2731 only 0.005 µA RI-I Input-Input Resistance(7) VI-I = 500VDC, HCPL2730M/2731M only 1011 Ω CI-I Input-Input Capacitance(7) f = 1MHz, HCPL2730M/2731M only 0.03 pF

©2009 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.0.2 6 6N138M, 6N139M, HCPL2730M, HCPL2731M — Low Input Current High Gain Split Darlington Optocouplers Electrical Characteristics (Continued) TA = 25°C unless otherwise specified) Current Limiting Resistor Calculations R1 (Non-Invert) = VDD1 – VDF – VOL1 IF R1 (Invert) = VDD1 – VOH1 – VDF IF R2 = VDD2 = VOLX (@ IL – I2) IL Where: VDD1 = Input Supply Voltage VDD2 = Output Supply Voltage VDF = Diode Forward Voltage VOL1 = Logic “0” Voltage of Driver VOH1 = Logic “1” Voltage of Driver IF = Diode Forward Current VOLX = Saturation Voltage of Output Transistor IL = Load Current Through Resistor R2 I2 = Input Current of Output Gate Fig. 2 Non-Inverting Logic Interface Fig. 3 Inverting Logic Interface Fig. 1 Resistor Values for Logic Interface 1RIN OUT VDD1 DD2V IN OUT 1 8 DD2V INPUT R1 (V) OUTPUT CMOS @ 5V CMOS @ 10V 74XX 74LXX 74SXX 74LSXX 74HXX R2 (V) R2 (V) R2 (V) R2 (V) R2 (V) R2 (V) R2 (V) CMOS @ 5V NON-INV. 2000 1000 2200 750 1000 1000 1000 560 INV. 510 CMOS @ 10V NON-INV. 5100 INV. 4700 74XX NON-INV. 2200 INV. 180 74LXX NON-INV. 1800 INV. 100 74SXX NON-INV. 2000 INV. 360 74LSXX NON-INV. 2000 INV. 180 74HXX NON-INV. 2000 INV. 180

©2009 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.0.2 7 6N138M, 6N139M, HCPL2730M, HCPL2731M — Low Input Current High Gain Split Darlington Optocouplers Typical Performance Curves Fig. 4 LED Forward Current vs. Forward Voltage FORWARD VOLTAGE - VF (V) FORWARD CURRENT - I F (mA) 0.001 0.01 0.1 100 Fig. 5 LED Forward Voltage vs. Temperature TEMPERATURE - TA (˚C) -40 -20 0 20 40 60 80 100 FORWARD VOLTAGE - V F (V) 1.6 1.5 1.4 1.3 1.2 1.0 Fig. 6 Current Transfer Ratio vs. Forward Current (6N138M / 6N139M Only) TA = 100˚C TA = 85˚C TA = 70˚C TA = 25˚C TA = 0˚C TA = -40˚C IF = 1.6 mA TEMPERATURE - TA (˚C) -40 -20 0 20 40 60 80 100 1.4 1.2 1.0 0.8 0.6 0.4 IF = 1.6 mA VCC = 4.5V VO = 0.4V Normalized to TA = 25°C NCTR - NORMALIZED CURRENT TRANSFE R RATIO (%) Fig. 7 Normalized Current Transfer Ratio vs. Ambient Temperature (6N138M / 6N139M Only) RBE - BASE RESISTANCE (kΩ) CTR - CURRENT TRANSFER RATIO (%) Fig. 8 Current Transfer Ratio vs. Base-Emitter Resistance (6N138M / 6N139M Only) 11 0 100 1000 2400 2000 1600 1200 800 400 IF = 1.6mA VCC = 5 V VO = 0.4 V IF - INPUT DIODE FORWARD CURRENT (mA) Fig. 9 Output Current vs. Input Diode Forward Current (6N138M / 6N139M Only) 0.01 0.1 1 10 IO - OUTPUT CURRENT (mA) 100 VCC = 5V VO = 0.4V TA = 70˚C / 85°C / 100°C / 110°C TA = 25˚C TA = 0˚C TA = -40˚C TA = 110˚C IF - FORWARD CURRENT (mA) 0.01 0.1 1 10 100 CURRENT TRANSFER RATIO - CTR (%) 3500 3000 2500 2000 1500 1000 500 VCC = 5V VO = 0.4V TA = -40˚C TA = 0˚C TA = 25˚C TA = 70˚C TA = 110˚C TA = 100˚C TA = 85˚C

©2009 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.0.2 8 6N138M, 6N139M, HCPL2730M, HCPL2731M — Low Input Current High Gain Split Darlington Optocouplers Typical Performance Curves (Continued) Fig. 11 Logic Low Supply Current vs. Input Diode Forward Current (6N138M / 6N139M Only) IF - FORWARD CURRENT (mA) 02468 1 0 1 2 1 4 1 6 ICCL - LOGIC LOW SUPPL Y CURR ENT (mA) VCC = 5V VCC = 18V Fig. 12 Propagation Delay vs. Temperature (6N138M / 6N139M Only) TA - TEMPERATURE (°C) -40 -40 0 20 40 60 80 100 tP - PROP AG ATION DELA Y ( µs) tPLH ( IF=0.5mA, RL=4.7kΩ) tPLH ( IF=1.5mA, RL=2.2kΩ) tPHL ( IF=0.5mA, RL=4.7kΩ) tPHL ( IF=1.5mA, RL=2.2kΩ) VCC = 5 V Fig. 10 Output Current vs Output Voltage (6N138M / 6N139M Only) VO - OUTPUT VOLTAGE (V) 012 IO - OUTPUT CURRENT (mA) 100 VCC = 5V TA = 25˚C 0.5mA 1mA 1.5mA 2mA 2.5mA 3mA 3.5mA 5mA 4.5mA4m Limit of safe operating region A

©2009 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.0.2 9 6N138M, 6N139M, HCPL2730M, HCPL2731M — Low Input Current High Gain Split Darlington Optocouplers Test Circuits Pulse Gen CMV VFF B A +5 V OV IF FV Shield Noise O GND V BV CCV LR PLH OLV VO 5 V 1.5 V FI 1.5 V TPHLT Switch at A : I = 0 mAF Switch at B : I = 1.6 mAF tr VO OV OLV 5 V

0 V 10% 10%

90%CMV 10 V 4 5 Noise Shield +5 V OV VCC V01 V02 GND VF1 F2V FI + FI MONITOR LR 0.1 µF GND+ F2V VF1 +5 V CCV L V02 V R VO VCM A B Pulse Gen FI I MonitorF I/ƒ < 100µs 10% Duty Cycle tr = 5ns Generator Pulse Z = 50Ω O VF IF VO O

5 GND

V BV LR CCV +5 V 0.1 µF LC = 15 pF* Test Circuit for 6N138M, 6N139M 0.1 µF Test Circuit for HCPL2730M and HCPL2731M Test Circuit for 6N138M and 6N139M Test Circuit for HCPL2730M and HCPL2731M ft FFV mR Rm 90% Shield Noise Shield Noise C = 15 pF*L 0.1 µF I/ƒ < 100µs 10% Duty Cycle tr = 5ns Generator Pulse Z = 50Ω O Fig. 13 Switching Time Test Circuit Fig. 14 Common Mode Immunity Test Circuit

©2009 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.0.2 10 6N138M, 6N139M, HCPL2730M, HCPL2731M — Low Input Current High Gain Split Darlington Optocouplers Package Dimensions Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to ver ify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www .fairchildsemi.com/packaging/ Through Hole Surface Mount – 0.3" Lead Spacing (Option S) Note: All dimensions are in inches (millimeters) 0.4" Lead Spacing (Option TV) (Pending) 8-Pin Surface Mount DIP – Land Pattern (Option S) 0.200 (5.08) MAX 0.100 (2.54) TYP 0.022 (0.56) 0.016 (0.41) 0.020 (0.51) MIN 0.390 (9.91) 0.370 (9.40) 0.270 (6.86) 0.250 (6.35) 0.070 (1.78) 0.045 (1.14) 0.156 (3.94) 0.144 (3.68) 241 56 7 8 0.300 (7.62) TYP 0.154 (3.90) 0.120 (3.05) 0.016 (0.40) 0.008 (0.20) 15° MAX PIN 1 ID. SEATING PLANE 0.270 (6.86) 0.250 (6.35) 0.390 (9.91) 0.370 (9.40) 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0.020 (0.51) MIN 0.070 (1.78) 0.045 (1.14) 0.156 (3.94) TYP 0.405 (10.30) MAX. 0.315 (8.00) MIN 0.015 (0.40) MIN Both Sides 32 14 56 7 8 0.016 (0.40) 0.008 (0.20) PIN 1 ID. 0.200 (5.08) MAX 0.100 (2.54) TYP 0.022 (0.56) 0.031 (0.78) 0.016 (0.41) 0.020 (0.51) MIN 0.390 (9.91) 0.370 (9.40) 0.270 (6.86) 0.250 (6.35) 0.070 (1.78) 0.156 (3.94) 0.144 (3.68) 0.045 (1.14) 241 56 7 8 0.400 (10.16) TYP 0.154 (3.90) 0.120 (3.05) 0.016 (0.40) 0.008 (0.20) 0° to 15° PIN 1 ID. SEATING PLANE 0.070 (1.78) 0.060 (1.52) 0.030 (0.76) 0.100 (2.54) 0.295 (7.49) 0.415 (10.54) 0.200 (5.08) MAX

©2009 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.0.2 11 6N138M, 6N139M, HCPL2730M, HCPL2731M — Low Input Current High Gain Split Darlington Optocouplers

Ordering Information

No Suffix 6N138M Standard Through Hole Device, 50 pcs per tube S 6N138SM Surface Mount Lead Bend SD 6N138SDM Surface Mount; Tape and reel V 6N138VM IEC60747-5-2 approval pending (VDE) TV 6N138TVM IEC60747-5-2 approval pending (VDE); 0.4” lead spacing SV 6N138SVM IEC60747-5-2 approval pending (VDE); surface mount SDV 6N138SDVM IEC60747-5-2 approval pending (VDE); surface mount; tape and reel 43 5 Note: ‘HCPL ’ devices are marked only with the numerical characters (for example, HCPL2730 is marked as ‘2730’). The ‘M’ suffix on the part number is an order identifier only. It is used to identify orders for the white package version. The ‘M’ does not appear on the device’s top mark. Definitions 1F airchild logo 2D evice number

3 VDE mark (Note: Only appears on parts ordered with VDE

option – See order entry table) (pending approval) 4T wo digit year code, e.g., ‘07’ 5T wo digit work week ranging from ‘01’ to ‘53’

6 Assembly package code

©2009 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.0.2 12 6N138M, 6N139M, HCPL2730M, HCPL2731M — Low Input Current High Gain Split Darlington Optocouplers Carrier Tape Specifications (Option SD) Symbol Description Dimension in mm WT ape Width 16.0 ± 0.3 tT ape Thickness 0.30 ± 0.05 P0 Sprocket Hole Pitch 4.0 ± 0.1 D0 Sprocket Hole Diameter 1.55 ± 0.05 E Sprocket Hole Location 1.75 ± 0.10 FP ocket Location 7.5 ± 0.1 P2 2.0 ± 0.1 PP ocket Pitch 12.0 ± 0.1 A0 Pocket Dimensions 10.30 ±0.20 B0 10.30 ±0.20 K0 4.90 ±0.20 W1 Cover Tape Width 13.2 ± 0.2 dC over Tape Thickness 0.1 max Max. Component Rotation or Tilt 10° R Min. Bending Radius 30 d t 2 User Direction of Feed W E D F P P

©2009 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.0.2 13 6N138M, 6N139M, HCPL2730M, HCPL2731M — Low Input Current High Gain Split Darlington Optocouplers Reflow Profile Profile Freature Pb-Free Assembly Profile Temperature Min. (Tsmin) 150°C Temperature Max. (Tsmax) 200°C Time (tS) from (Tsmin to Tsmax) 60–120 seconds Ramp-up Rate (tL to tP) 3°C/second max. Liquidous Temperature (TL) 217°C Time (tL) Maintained Above (TL) 60–150 seconds Peak Body Package Temperature 260°C +0°C / –5°C Time (tP) within 5°C of 260°C 30 seconds Ramp-down Rate (TP to TL) 6°C/second max. Time 25°C to Peak Temperature 8 minutes max. Time (seconds) Temperature (°C) Time 25°C to Peak 260 240 220 200 180 160 140 120 100 T L ts tL tP TP Tsmax Tsmin 120 Preheat Area Max. Ramp-up Rate = 3°C/S Max. Ramp-down Rate = 6°C/S 240 360

©2009 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.0.2 14 TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries,a n dis not intended to be an exhaustive list of all such trademarks. AccuPower™ Auto-SPM™ Build it Now™ CorePLUS™ CorePOWER™ CROSSVOLT™ CTL™ Current Transfer Logic™ DEUXPEED EcoSPARK® EfficientMax™ EZSWITCH™* Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FETBench™ FlashWriter® * FPS™ F-PFS™ FRFET® Global Power Resource SM Green FPS™ Green FPS™ e-Series™ Gmax™ GTO™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ MotionMax™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® PDP SPM™ Power-SPM™ PowerTrench® PowerXS™ Programmable Active Droop™ QFET® QS™ Quiet Series™ RapidConfigure™ Saving our world, 1mW/W/kW at a time™ SignalWise™ SmartMax™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™ -3 SuperSOT™ -6 SuperSOT™ -8 SupreMOS™ SyncFET™ Sync-Lock™ ® * TheP ower Franchise® TinyBoost™ TinyBuck™ TinyCalc™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ TriFault Detect™ TRUECURRENT™ * µSerDes™ UHC® Ultra FRFET™ UniFET™ VCX™ VisualMax™ XS™ *T rademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, faileda pplications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technicala n dproduct information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Form First Production ative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I44 6N138M, 6N139M, HCPL2730M, HCPL2731M — Low Input Current High Gain Split Darlington Optocouplers