6N137_08 FAIRCHILD

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 12

Technical content

Features

Very high speed – 10 MBit/s Superior CMR – 10 kV/µs Double working voltage-480V Fan-out of 8 over -40°C to +85°C Logic gate output Strobable output Wired OR-open collector U.L. recognized (File # E90700)

Applications

LSTTL to TTL, LSTTL or 5-volt CMOS Line receiver, data transmission Data multiplexing Switching power supplies Pulse transformer replacement Computer-peripheral interface

Description

The 6N137, HCPL2601, HCPL2611 single-channel and HCPL2630, HCPL2631 dual-channel optocouplers consist of a 850 nm AlGaAS LED, optically coupled to a very high speed integrated photo-detector logic gate with a strobable output. This output features an open collec- tor, thereby permitting wired OR outputs. The coupled parameters are guaranteed over the temperature range of -40°C to +85°C. A maximum input signal of 5mA will provide a minimum output sink current of 13mA (fan out of 8). An internal noise shield provides superior common mode rejection of typically 10kV/µs. The HCPL2601 and HCPL2631 has a minimum CMR of 5kV/µs. The HCPL2611 has a minimum CMR of 10kV/µs. Schematics Package Outlines A 0.1µF bypass capacitor must be connected between pins 8 and 5(1). 4 5 8N/C VCC VE VO GND N/C VF 4 5 VF1 VCC V01 V02 GND VF2 HCPL2630 HCPL2631 6N137 HCPL2601 HCPL2611 Truth Table (Positive Logic) Input Enable Output H H L L H H H L H L L H H NC L L NC H

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N137, HCPL2601, HCPL2611, HCPL2630, HCPL2631 Rev. 1.0.7 2 Single-Channel: 6N137, HCPL2601, HCPL2611 Dual-Channel: HCPL2630, HCPL2631 — High Speed 10MBit/s Logic Gate Optocouplers Absolute Maximum Ratings A = 25°C unless otherwise specified) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. *6.3mA is a guard banded value which allows for at least 20% CTR degradation. Initial input current threshold value is 5.0mA or less. Symbol Parameter Value Units T STG Storage Temperature -55 to +125 °C T OPR Operating Temperature -40 to +85 °C T SOL Lead Solder Temperature 260 for 10 sec °C EMITTER I F DC/Average Forward Single Channel 50 mA Input Current Dual Channel (Each Channel) 30 V E Enable Input Voltage Not to Exceed V CC by more than 500mV Single Channel 5.5 V V R Reverse Input Voltage Each Channel 5.0 V P I Power Dissipation Single Channel 100 mW Dual Channel (Each Channel) 45 DETECTOR V CC (1 minute max) Supply Voltage 7.0 V I O Output Current Single Channel 50 mA Dual Channel (Each Channel) 50 V O Output Voltage Each Channel 7.0 V P O Collector Output Single Channel 85 mW Power Dissipation Dual Channel (Each Channel) 60 Symbol Parameter Min. Max. Units I FL Input Current, Low Level 0 250 µA I FH Input Current, High Level *6.3 15 mA V CC Supply Voltage, Output 4.5 5.5 V V EL Enable Voltage, Low Level 0 0.8 V V EH Enable Voltage, High Level 2.0 V CC V T A Low Level Supply Current -40 +85 °C NF an Out (TTL load) 8

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N137, HCPL2601, HCPL2611, HCPL2630, HCPL2631 Rev. 1.0.7 3 Single-Channel: 6N137, HCPL2601, HCPL2611 Dual-Channel: HCPL2630, HCPL2631 — High Speed 10MBit/s Logic Gate Optocouplers

Electrical Characteristics

A = 0 to 70°C unless otherwise specified) Individual Component Characteristics Switching Characteristics A = -40°C to +85°C, V CC = 5V, I F = 7.5mA unless otherwise specified) Symbol Parameter Test Conditions Min. Typ.* Max. Unit EMITTER V F Input Forward Voltage I F = 10mA 1.8 V T A = 25°C 1.4 1.75 B VR Input Reverse Breakdown Voltage I R = 10µA 5.0 V C IN Input Capacitance V F = 0, f = 1MHz 60 pF V F T A Input Diode Temperature Coefficient I F = 10mA -1.4 mV/°C DETECTOR I CCH High Level Supply Current V CC = 5.5V, I F = 0mA, V E = 0.5V Single Channel 7 10 mA Dual Channel 10 15 I CCL Low Level Supply Current Single Channel V CC = 5.5V, I F = 10mA 91 3 m A Dual Channel V E = 0.5V 14 21 I EL Low Level Enable Current V CC = 5.5V, V E I EH High Level Enable Current V CC = 5.5V, V E V EH High Level Enable Voltage V CC = 5.5V, I F = 10mA 2.0 V V EL Low Level Enable Voltage V CC = 5.5V, I F = 10mA (3) 0.8 V Symbol AC Characteristics Test Conditions Min. Typ.* Max. Unit T PLH Propagation Delay Time to Output HIGH Level R L = 350 Ω C L = 15pF (4) (Fig. 12) T A = 25°C 20 45 75 ns 100 T PHL Propagation Delay Time to Output LOW Level T A = 25°C (5) 25 45 75 ns R L = 350 Ω , C L = 15pF (Fig. 12) 100 PHL PLH | Pulse Width Distortion (R L = 350 Ω , C L = 15pF (Fig. 12) 3 35 ns t r Output Rise Time (10–90%) R L = 350 Ω , C L = 15pF (6) (Fig. 12) 50 ns t f Output Rise Time (90–10%) R L = 350 Ω , C L = 15pF (7) (Fig. 12) 12 ns t ELH Enable Propagation Delay Time to Output HIGH Level I F = 7.5mA, V EH = 3.5V, R L = 350 Ω , C L = 15pF (8) (Fig. 13) 20 ns t EHL Enable Propagation Delay Time to Output LOW Level I F = 7.5mA, V EH = 3.5V, RL = 350Ω, CL = 15pF(9) (Fig. 13) 20 ns |CMH| Common Mode Transient Immunity (at Output HIGH Level) TA = 25°C, |VCM| = 50V (Peak), IF = 0mA, VOH (Min.) = 2.0V, RL = 350Ω(10) (Fig. 14) 6N137, HCPL2630 10,000 V/µs HCPL2601, HCPL2631 5000 10,000 |VCM| = 400V HCPL2611 10,000 15,000 V/µs |CML| Common Mode Transient Immunity (at Output LOW Level) RL = 350Ω, IF = 7.5mA, VOL (Max.) = 0.8V, TA = 25°C(11) (Fig. 14) 6N137, HCPL2630 10,000 HCPL2601, HCPL2631 5000 10,000 |VCM| = 400V HCPL2611 10,000 15,000

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N137, HCPL2601, HCPL2611, HCPL2630, HCPL2631 Rev. 1.0.7 4 Single-Channel: 6N137, HCPL2601, HCPL2611 Dual-Channel: HCPL2630, HCPL2631 — High Speed 10MBit/s Logic Gate Optocouplers Electrical Characteristics (Continued) Transfer Characteristics (TA = -40 to +85°C unless otherwise specified) Isolation Characteristics (TA = -40°C to +85°C unless otherwise specified.) *All Typicals at VCC = 5V, TA = 25°C Notes: 1. The V CC supply to each optoisolator must be bypassed by a 0.1µF capacitor or larger. This can be either a ceramic or solid tantalum capacitor with good high frequency characteristic and should be connected as close as possible to the package V CC and GND pins of each device. 2. Each channel. 3. Enable Input – No pull up resistor required as the device has an internal pull up resistor. 4. t PLH – Propagation delay is measured from the 3.75mA level on the HIGH to LOW transition of the input current pulse to the 1.5 V level on the LOW to HIGH transition of the output voltage pulse. 5. t PHL – Propagation delay is measured from the 3.75mA level on the LOW to HIGH transition of the input current pulse to the 1.5 V level on the HIGH to LOW transition of the output voltage pulse. 6. t r – Rise time is measured from the 90% to the 10% levels on the LOW to HIGH transition of the output pulse. 7. t f – Fall time is measured from the 10% to the 90% levels on the HIGH to LOW transition of the output pulse. 8. t ELH – Enable input propagation delay is measured from the 1.5V level on the HIGH to LOW transition of the input voltage pulse to the 1.5V level on the LOW to HIGH transition of the output voltage pulse. 9. t EHL – Enable input propagation delay is measured from the 1.5V level on the LOW to HIGH transition of the input voltage pulse to the 1.5V level on the HIGH to LOW transition of the output voltage pulse. 10. CMH – The maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the HIGH state (i.e., VOUT > 2.0V). Measured in volts per microsecond (V/µs). 11. CML – The maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the LOW output state (i.e., VOUT < 0.8V). Measured in volts per microsecond (V/µs). 12. Device considered a two-terminal device: Pins 1, 2, 3 and 4 shorted together, and Pins 5, 6, 7 and 8 shorted together. Symbol DC Characteristics Test Conditions Min. Typ.* Max. Unit IOH HIGH Level Output Current V CC = 5.5V, VO = 5.5V, IF = 250µA, VE = 2.0V(2) 100 µA VOL LOW Level Output Current V CC = 5.5V, IF = 5mA, VE = 2.0V, ICL = 13mA(2) .35 0.6 V IFT Input Threshold Current V CC = 5.5V, VO = 0.6V, VE = 2.0V, IOL = 13mA 3 5 mA Symbol Characteristics Test Conditions Min. Typ.* Max. Unit II-O Input-Output Insulation Leakage Current Relative humidity = 45%, TA = 25°C, t = 5s, VI-O = 3000 VDC(12) 1.0* µA VISO Withstand Insulation Test Voltage RH < 50%, TA = 25°C, II-O ≤ 2µA, t = 1 min.(12)

2500 V RMS

RI-O Resistance (Input to Output) V I-O = 500V(12) 1012 Ω CI-O Capacitance (Input to Output) f = 1MHz (12) 0.6 pF

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N137, HCPL2601, HCPL2611, HCPL2630, HCPL2631 Rev. 1.0.7 5 Single-Channel: 6N137, HCPL2601, HCPL2611 Dual-Channel: HCPL2630, HCPL2631 — High Speed 10MBit/s Logic Gate Optocouplers Typical Performance Curves Fig.1 Low Level Output Voltage vs. Ambient Temperature TA – AMBIENT TEMPERATURE (°C) TA – AMBIENT TEMPERATURE (°C) TA – AMBIENT TEMPERATURE (°C) -40 -20 0 20 40 60 80 V OL – LOW LEVEL OUTPUT VO LTAGE (V) TP – PROPAGATION DE LAY (ns) IF – FORWARD CURRENT (mA) IOL LOW LEVEL OUTPUT CURR ENT (mA) V O – OUTPUT VOLTAGE (V) IF – FORWARD CURRENT (mA) IF - FORWARD CURRENT (mA) IOL = 16mA Fig. 4 Low Level Output Current vs. Ambient Temperature -40 -20 0 20 40 60 80 -40 -20 0 20 40 60 80 IF = 5mA IF = 10mA IF = 15mA Fig. 5 Input Threshold Current vs. Ambient Temperature IFT – INPUT THRESHOLD CURRENT (mA) RL = 350Ω RL = 1kΩ RL = 4kΩ Fig. 6 Output Voltage vs. Input Forward Current RL = 350Ω RL = 1kΩ RL = 4kΩ IOL = 6.4mA IOL = 9.6mA IOL = 12.8 mA Conditions: IF = 5 mA VE = 2 V VCC = 5.5V Conditions: VCC = 5.0 V VO = 0.6 V Fig. 2 Input Diode Forward Voltage vs. Forward Current VF – FORWARD VOLTAGE (V) Conditions: VCC = 5 V VE = 2 V VOL = 0.6 V Fig.3 Switching Time vs. Forward Current 01 2 345 6 79 1 1 13 15 VCC = 5 V RL = 1 kΩ (TPLH) RL = 4 kΩ (TPLH) RL = 350 Ω (TPLH) RL = 1 kΩ RL = 4 kΩ RL = 350 kΩ (TPHL) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 100 120 0.001 0.01 0.1

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N137, HCPL2601, HCPL2611, HCPL2630, HCPL2631 Rev. 1.0.7 6 Single-Channel: 6N137, HCPL2601, HCPL2611 Dual-Channel: HCPL2630, HCPL2631 — High Speed 10MBit/s Logic Gate Optocouplers Typical Performance Curves (Continued) Fig. 7 Pulse Width Distortion vs. Temperature TA – TEMPERATURE (°C) TA – TEMPERATURE (°C) TA – TEMPERATURE (°C) TA – TEMPERATURE (°C) T A – TEMPERATURE (°C) -60 -40 -20 0 20 40 60 80 100 -60 -40 -20 0 20 40 60 80 100 -60 -40 -20 0 20 40 60 80 100 -60 -40 -20 0 20 40 60 80 100 -60 -40 -20 0 20 40 60 80 100 PWD – PULSE WIDTH DISTORTIO N (ns) TE – ENABLE PROPAGATION DELAY (ns) IOH – HIGH LEVEL OUTPUT CU RRENT ( µA) TP – PROPAGATION DE LAY (ns) Tr/Tf – RISE AND FALL TIME (ns) RL = 4 kΩ RL = 1 kΩ RL = 350Ω F Conditions: I = 7.5mA VCC = 5A Fig. 8 Rise and Fall Time vs. Temperature LR = 4 kΩ (tr) Conditions: IF = 7.5 mA VCC = 5 V RL = 1 kΩ (tr) RL = 350Ω (tr) RL = 1 kΩ RL = 4 kΩ (tf) RL = 350Ω Fig. 9 Enable Propagation Delay vs. Temperature RL = 4 kΩ (TELH) RL = 1 kΩ (TELH) RL = 350Ω (TELH) RL = 350Ω RL = 1 kΩ RL = 4 kΩ (TEHL) Fig. 10 Switching Time vs. Temperature RL = 1 kΩ TPLH RL = 350Ω TPLH RL = 4 kΩ TPLH RL = 1 kΩ RL = 4 kΩ RL = 350Ω TPHL Fig. 11 High Level Output Current vs. Temperature VCC = 5.5 V Conditions: VO = 5.5 V VE = 2.0 V IF = 250 µA 100 200 300 400 500 600 100 120 100 120

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N137, HCPL2601, HCPL2611, HCPL2630, HCPL2631 Rev. 1.0.7 7 Single-Channel: 6N137, HCPL2601, HCPL2611 Dual-Channel: HCPL2630, HCPL2631 — High Speed 10MBit/s Logic Gate Optocouplers Test Circuits PHLt FI = 7.5 mA 1.5 V 90% 10% 7.5 mA +5V 1.5 V 3.0 V 1.5 V 4 5 Pulse Generator tr = 5ns Z = 50Ω O +5V GND PLHt I = 3.75 mAF Output O(V ) Input (I )F Output (V )O ft rt CCV Output (V )O LR CL(I ) Input F Monitor OZ = 50Ω Pulse Generator tr = 5ns (V ) E Input Monitor GND VCC O(V ) Output LR LC (V ) Output O Input (V )E EHLtt ELH bypass .1 µf bypass .1 µf Fig. 12 Test Circuit and Waveforms for tPLH, tPHL, tr and tf Fig. 13 Test Circuit tEHL and tELH

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N137, HCPL2601, HCPL2611, HCPL2630, HCPL2631 Rev. 1.0.7 8 Single-Channel: 6N137, HCPL2601, HCPL2611 Dual-Channel: HCPL2630, HCPL2631 — High Speed 10MBit/s Logic Gate Optocouplers Test Circuits (Continued) +5V Peak GND VCC O(V ) Output 350Ω VCM FFV A B Pulse Gen IF CMV OV Switching Pos. (A), I = 0F OV (Max) CM 0.5 V OV Switching Pos. (B), I = 7.5 mAF H CML V (Min)O bypass .1 µf Fig. 14 Test Circuit Common Mode Transient Immunity

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N137, HCPL2601, HCPL2611, HCPL2630, HCPL2631 Rev. 1.0.7 9 Single-Channel: 6N137, HCPL2601, HCPL2611 Dual-Channel: HCPL2630, HCPL2631 — High Speed 10MBit/s Logic Gate Optocouplers Package Dimensions Through Hole Surface Mount Note: All dimensions are in inches (millimeters) 0.4" Lead Spacing 8-Pin DIP – Land Pattern 0.200 (5.08) 0.140 (3.55) 0.100 (2.54) TYP 0.022 (0.56) 0.016 (0.41) 0.020 (0.51) MIN 0.390 (9.91) 0.370 (9.40) 0.270 (6.86) 0.250 (6.35) 0.070 (1.78) 0.045 (1.14) 241 56 7 8 0.300 (7.62) TYP 0.154 (3.90) 0.120 (3.05) 0.016 (0.40) 0.008 (0.20) 15° MAX PIN 1 ID. SEATING P LANE Lead Coplanarity : 0.004 (0.10) MAX 0.270 (6.86) 0.250 (6.35) 0.390 (9.91) 0.370 (9.40) 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0.020 (0.51) MIN 0.070 (1.78) 0.045 (1.14) 0.300 (7.62) TYP 0.405 (10.30) MAX. 0.315 (8.00) MIN 0.045 (1.14) 32 14 56 7 8 0.016 (0.41) 0.008 (0.20) PIN 1 ID. 0.200 (5.08) 0.140 (3.55) 0.100 (2.54) TYP 0.022 (0.56) 0.016 (0.41) 0.004 (0.10) MIN 0.390 (9.91) 0.370 (9.40) 0.270 (6.86) 0.250 (6.35) 0.070 (1.78) 0.045 (1.14) 241 56 7 8 0.400 (10.16) TYP 0.154 (3.90) 0.120 (3.05) 0.016 (0.40) 0.008 (0.20) 0° to 15° PIN 1 ID. SEATING PLANE 0.070 (1.78) 0.060 (1.52) 0.030 (0.76) 0.100 (2.54) 0.295 (7.49) 0.415 (10.54)

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N137, HCPL2601, HCPL2611, HCPL2630, HCPL2631 Rev. 1.0.7 10 Single-Channel: 6N137, HCPL2601, HCPL2611 Dual-Channel: HCPL2630, HCPL2631 — High Speed 10MBit/s Logic Gate Optocouplers

Ordering Information

Option Example Part Number Description S 6N137S Surface Mount Lead Bend SD 6N137SD Surface Mount; Tape and Reel W 6N137W 0.4" Lead Spacing V 6N137V VDE0884 WV 6N137WV VDE0884; 0.4” Lead Spacing SV 6N137SV VDE0884; Surface Mount SDV 6N137SDV VDE0884; Surface Mount; Tape and Reel 43 5 Definitions 1F airchild logo 2D evice number

3 VDE mark (Note: Only appears on parts ordered with VDE option –

See order entry table) 4T wo digit year code, e.g., ‘03’ 5T wo digit work week ranging from ‘01’ to ‘53’

6 Assembly package code

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N137, HCPL2601, HCPL2611, HCPL2630, HCPL2631 Rev. 1.0.7 11 Single-Channel: 6N137, HCPL2601, HCPL2611 Dual-Channel: HCPL2630, HCPL2631 — High Speed 10MBit/s Logic Gate Optocouplers Tape Specifications Reflow Profile 4.0 ± 0.1 Ø1.55 ± 0.05 User Direction of Feed 4.0 ± 0.1 1.75 ± 0.10 7.5 ± 0.1 16.0 ± 0.3 12.0 ± 0.1 0.30 ± 0.05 13.2 ± 0.2 4.90 ± 0.20 0.1 MAX 10.30 ± 0.20 10.30 ± 0.20 Ø1.6 ± 0.1

  • Peak reflow temperature: 225 C (package surface temperature)
  • Time of temperature higher than 183 C for 60–150 seconds
  • One time soldering reflow is recommended

215 C, 10–30 s

225 C peak

Time (Minute) 300 250 200 150 100 Temperature (°C) Time above 183 C, 60–150 sec Ramp up = 3 C/sec

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N137, HCPL2601, HCPL2611, HCPL2630, HCPL2631 Rev. 1.0.7 12 TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries,a n dis not intended to be an exhaustive list of all such trademarks. Build it Now™ CorePLUS™ CorePOWER™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK EfficentMax™ EZSWITCH™ * Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FlashWriter®* FPS™ F-PFS™ FRFET® Global Power Resource SM Green FPS™ Green FPS™e-Series™ GTO™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ MotionMax™ Motion-SPM™ OPTOLOGIC OPTOPLANAR® PDP SPM™ Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ Quiet Series™ RapidConfigure™ Saving our world, 1mW at a time™ SmartMax™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™ -3 SuperSOT™ -6 SuperSOT™ -8 SupreMOS™ SyncFET™ TheP ower Franchise® TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC® Ultra FRFET™ UniFET™ VCX™ VisualMax™ *E ZSWITCH™ and FlashWriter ® are trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICHCOVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technicala nd product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Prod uct Status Definition Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I35 Single-Channel: 6N137, HCPL2601, HCPL2611 Dual-Channel: HCPL2630, HCPL2631 — High Speed 10MBit/s Logic Gate Optocouplers