HCPL2503M FAIRCHILD

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 13

Technical content

Features

High speed –1 MBit/s Superior CMR – 10kV/µs Dual-Channel HCPL2530M, HCPL2531M (Preliminary) CTR guaranteed 0–70°C U.L. recognized (File # E90700, Vol. 2) 5,000Vrms (1 minute) isolation rating Superior CMR of 15,000V/µs min. (HCPL4503M) >8mm creepage and clearance (option T) No base connection for improved noise immunity (HCPL4502M, HCPL4503M)

Applications

Pulse transformer replacement Output interface to CMOS-LSTTL-TTL Wide bandwidth analog coupling

Description

The HCPL4502M, HCPL4503M, HCPL2503M, 6N135M, 6N136M, HCPL2530M and HCPL2531M optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor. A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. An internal noise shield provides superior common mode rejection of up to 50,000V/µs. Schematics Package Outlines 4 5 VF1 VCC V01 V02 GND VF2 HCPL2530M/HCPL2531M 4 5 VF VCC VB VO GNDN/C N/C 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Pin 7 is not connected in HCPL4502M and HCPL4503M

©2008 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N13XM, HCPLXXXM Rev. 1.0.1 2 Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor Optocouplers PRELIMINARY Absolute Maximum Ratings A = 25°C unless otherwise specified) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Notes: 1. Derate linearly above 70°C free-air temperature at a rate of 0.8mA/°C. 2. Derate linearly above 70°C free-air temperature at a rate of 1.6mA/°C. 3. Derate linearly above 70°C free-air temperature at a rate of 0.9 mW/°C. 4. Derate linearly above 70°C free-air temperature at a rate of 2.0 mW/°C. Symbol Parameter Condition Value Units T STG Storage Temperature -40 to +125 °C T OPR Operating Temperature -40 to +100 °C T SOL Lead Solder Temperature (Wave) 260 for 10 sec °C EMITTER I F (avg) DC/Average Forward Input Current Each Channel (1) 25 mA I F (pk) Peak Forward Input Current Each Channel (2) 50% duty cycle, 1ms P .W. 50 mA I F (trans) Peak Transient Input Current Each Channel 1µs P .W., 300pps 1.0 A V R Reverse Input Voltage Each Channel P D Input Power Dissipation Each Channel 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M 100 mW HCPL2530M, HCPL2531M (3) DETECTOR I O (avg) Average Output Current Each Channel 8 mA I O (pk) Peak Output Current Each Channel 16 mA V EBR Emitter-Base Reverse Voltage 6N135M, 6N136M and HCPL2503M only 5 V V CC Supply Voltage -0.5 to 30 V V O Output Voltage -0.5 to 20 V I B Base Current 6N135M, 6N136M and HCPL2503M only 5 mA PD Output Power Dissipation Each Channel 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M (4) 100 mW HCPL2530M, HCPL2531M 35 mW

©2008 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N13XM, HCPLXXXM Rev. 1.0.1 3 Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor Optocouplers PRELIMINARY

Electrical Characteristics

A = 0 to 70°C Unless otherwise specified) Individual Component Characteristics *All Typicals at T A = 25°C Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit EMITTER V F Input Forward Voltage I F = 16mA, T A =25°C All 1.45 1.7 V I F = 16mA All 1.8 B VR Input Reverse Breakdown Voltage I R = 10 µA All 5.0 V V F T A Temperature Coefficient of Forward Voltage I F = 16mA All -1.6 mV/°C DETECTOR I OH Logic High Output Current I F = 0mA, V O = V CC = 5.5V, T A =25°C All 0.003 0.5 µA I F = 0mA, V O = V CC = 15V, T A =25°C 6N135M 6N136M HCPL4502M HCPL4503M HCPL2503M 0.005 1 I F = 0mA, V O = V CC = 15V All 50 I CCL Logic Low Supply Current I F = 16mA, V O = Open, V CC = 15V 6N135M 6N136M HCPL4502M HCPL4503M HCPL2503M 145 200 µA I = I = 16mA, V O = Open, V CC = 15V HCPL2530M HCPL2531M 250 400 I CCH Logic High Supply Current I F = 0mA, V O = Open, V CC = 15V, T A =25°C 6N135M 6N136M HCPL4502M HCPL4503M HCPL2503M 1µ A I F = 0mA, V O = Open, V CC = 15V 6N135M 6N136M HCPL4502M HCPL4503M HCPL2503M I F = 0mA, V O = Open, V CC = 15V HCPL2530M HCPL2531M 0.02 4

©2008 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N13XM, HCPLXXXM Rev. 1.0.1 4 Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor Optocouplers PRELIMINARY (Continued) (T A = 0 to 70°C unless otherwise specified) Transfer Characteristics *All Typicals at T A = 25°C Note: 5. Current Transfer Ratio is defined as a ratio of output collector current, I O , to the forward LED input current, I F times 100%. Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit COUPLED CTR Current Transfer Ratio (5) I F = 16mA, V O = 0.4 V, V CC = 4.5V, T A =25°C 6N135M HCPL2530M 71 8 5 0 % 6N136M HCPL4502M HCPL4503M HCPL2531M 19 30 50 % HCPL2503M 12 27 % I F = 16mA, V CC = 4.5V V OL = 0.4V 6N135M 5 21 % V OL = 0.5V HCPL2530M V OL = 0.4V 6N136M HCPL4502M HCPL4503M 15 30 % V OL = 0.5V HCPL2531M V OL = 0.4V HCPL2503M 9 30 % V OL Logic LOW Output Voltage I F = 16mA, I O = 1.1mA, V CC = 4.5V, T A =25°C 6N135M 0.10 0.4 V HCPL2530M 0.10 0.5 I F = 16mA, I O = 3mA, V CC = 4.5V, T A =25°C 6N136M HCPL2503M HCPL4503M 0.15 0.4 HCPL2531M 0.15 0.5 I F = 16mA, I O = 0.8mA, V CC = 4.5V 6N135M HCPL2530M 0.5 I F = 16mA, I O = 2.4mA, V CC = 4.5V HCPL4502M HCPL4503M HCPL2531M 0.5

©2008 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N13XM, HCPLXXXM Rev. 1.0.1 5 Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor OptocouplersPRELIMINARY Electrical Characteristics (Continued) (TA = 0 to 70°C unless otherwise specified) Switching Characteristics (VCC = 5V) ** All Typicals at TA = 25°C Notes: 8. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common mode pulse signal V CM, to assure that the output will remain in a logic high state (i.e., V O > 2.0V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO < 0.8V). Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit TPHL Propagation Delay Time to Logic LOW T A = 25°C, RL = 4.1kΩ, IF = 16mA(6) (Fig. 7) 6N135M HCPL2530M 0.45 1.5 µs RL = 1.9kΩ, IF = 16mA, TA = 25°C(7) (Fig. 7) 6N136M HCPL4502M HCPL4503M HCPL2503M HCPL2531M 0.45 0.8 µs R L = 4.1kΩ, IF = 16mA(6) (Fig. 7) 6N135M HCPL2530M 2.0 µs RL = 1.9kΩ, IF = 16mA(7) (Fig. 7) 6N136M HCPL4502M HCPL4503M HCPL2503M HCPL2531M 1.0 µs T PLH Propagation Delay Time to Logic HIGH T A = 25°C, (RL = 4.1kΩ, IF = 16mA(6) (Fig. 7) 6N135M HCPL2530M 0.5 1.5 µs RL = 1.9kΩ, IF = 16mA(7) (Fig. 7) TA = 25°C 6N136M HCPL4502M HCPL4503M HCPL2503M HCPL2531M 0.3 0.8 µs R L = 4.1kΩ, IF = 16mA(6) (Fig. 7) 6N135M HCPL2530M 2.0 µs RL = 1.9kΩ, IF = 16mA(7) (Fig. 7) 6N136M HCPL4502M HCPL4503M HCPL2503M HCPL2531M 1.0 µs |CM H| Common Mode Transient Immunity at Logic High I F = 0mA, VCM = 10VP-P, RL = 4.1kΩ, TA = 25°C(8) (Fig. 8) 6N135M HCPL2530M 10,000 V/µs IF = 0mA, VCM = 10VP-P, RL = 1.9kΩ, TA = 25°C(8) (Fig. 8) 6N136M HCPL4502M HCPL2503M HCPL2531M 10,000 V/µs I F = 0mA, VCM = 1,500VP-P, RL = 1.9kΩ, TA = 25°C(8) (Fig. 8) HCPL4503M 15,000 30,000 |CML| Common Mode Transient Immunity at Logic Low I F = 16mA, VCM = 10VP-P, RL = 4.1kΩ, TA = 25°C(8) (Fig. 8) 6N135M HCPL2530M 10,000 V/µs IF = 16mA, VCM = 10VP-P, RL = 1.9kΩ(8) (Fig. 8) 6N136M HCPL4502M HCPL2503M HCPL2531M 10,000 V/µs IF = 0mA, VCM = 1,500VP-P, RL = 1.9kΩ, TA = 25°C(8) (Fig. 8) HCPL4503M 15,000 30,000

©2008 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N13XM, HCPLXXXM Rev. 1.0.1 6 Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor OptocouplersPRELIMINARY Electrical Characteristics (Continued) (TA = 0 to 70°C unless otherwise specified) Isolation Characteristics (TA = 0 to 70°C Unless otherwise specified) Notes: 9. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted together. 10. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together. 11. 5,000Vrms for 1 minute duration is equivalent to 6,000Vrms for 1 second duration. Symbol Characteristics Test Conditions Min Typ** Max Unit VISO Withstand Insulation Test Voltage RH ≤ 50%, TA = 25°C, II-O ≤ 10µA, t = 1 min., f = 50Hz(9)(11) 5,000 V RMS RI-O Resistance (Input to Output) V I-O = 500VDC(9) 1011 Ω CI-O Capacitance (Input to Output) f = 1MHz, V I-O = 0V(9) 1p F HFE DC Current Gain I O = 3mA, VO = 5V(9) 150 II-I Input-Input Insulation Leakage Current RH ≤ 45%, VI-I = 500VDC(10) t = 5 s, (HCPL2530M/2531M only) 0.005 µA RI-I Input-Input Resistance V I-I = 500 VDC(10) (HCPL2530M/2531M only) 1011 Ω CI-I Input-Input Capacitance f = 1MHz (10) (HCPL2530M/2531M only) 0.03 pF

©2008 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N13XM, HCPLXXXM Rev. 1.0.1 7 Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor OptocouplersPRELIMINARY Typical Performance Curves Fig. 1 Normalized CTR vs. Forward Current IF - FORWARD CURRENT (mA) 0.1 1 10 100 NORMALIZED CTR 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Fig. 2 Normalized CTR vs. Temperature TA - TEMPERATURE (°C) -40 -20 0 20 40 60 80 100 NORMALIZED CTR 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Fig. 3 Output Current vs. Output Voltage VO – OUTPUT VOLTAGE (V) 02468 1 0 1 2 1 41 61 82 0 IO – OUTPUT CU RRENT (mA) Normalized to: IF = 16 mA VO = 0.4 V VCC = 5 V TA = 25°C Normalized to: TA = 25°C IF = 16mA VCC = 4.5V VO = 0.4V Fig. 4 Logic High Output Current vs. Temperature TA – TEMPERATURE (°C) -40 -20 0 20 40 60 80 100 IOH – LOGIC HIGH OUTP UT CURRENT (nA) 0.1 100 Fig. 5 Propagation Delay vs. Temperature TA – TEMPERATURE (°C) -40 -20 0 20 40 60 80 100 Tp – PROPAGATION DELA Y (ns) 100 200 300 400 500 600 700 800 RL = 1.9kΩ (tPHL) R = 4.1kΩ (tPHL)L RL = 1.9kΩ (tPLH) RL = 4.1kΩ (tPLH) Fig. 6 Propagation Delay vs. Load Resistance RL – LOAD RESISTANCE (kΩ) 1 10 TP - PROP AG ATION DELA Y (ns) 100 1000 IF = 16mA (tPLH) IF = 10mA (tPHL) IF = 10mA (tPLH) IF = 16mA (tPHL) TA = 25°C VCC = 5 V IF = 0 mA VCC = 5.5V VO = 5.5V Frequency = 10kHz Duty Cycle = 10% IF = 16mA VCC = 5 V IF 35mA 30mA 25mA 20mA 15mA 10mA 5mA = 40mA Frequency = 10kHz Duty Cycle = 10% I F = 16mA VCC = 5 V

©2008 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N13XM, HCPLXXXM Rev. 1.0.1 8 Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor OptocouplersPRELIMINARY Test Circuits Pulse Gen CMV VFF B A +5 V OV IF FV Shield Noise O GND V BV CCV LR PLH OLV VO 5 V 1.5 V FI 1.5 V TPHLT Switch at A : I = 0 mAF Switch at A : I = 16 mAF tr VO OV OLV 5 V

0 V 10% 10%

90%CMV 10 V 4 5 Noise Shield +5 V OV VCC V01 V02 GND VF1 F2V FI + 10% DUTY CYCLE I/f < 100µS FI MONITOR LR C = 1.5 µFL Pulse Generator tr = 5ns Z = 50O Ω GND+ 4 5 F2V VF1 Shield Noise +5 V CC V L V V R VO VCM A B Pulse Gen FI I MonitorF I/f < 100µs 10% D.C. tr = 5ns Generator Pulse Z = 50O VF I Ω F Shield Noise VO O

5 GND

V BV LR CCV +5 V 0.1 µF LC = 1.5 µF Test Circuit for 6N135M, 6N136M, HCPL2503M, HCPL4502M and HCPL4503M Test Circuit for HCPL2530M and HCPL2531M 0.1 µF ft 0.1 µF 0.1 µF FFV mR mR 90% Fig. 7 Switching Time Test Circuit Fig. 8 Common Mode Immunity Test Circuit Test Circuit for 6N135M, 6N136M, HCPL2503M, HCPL4502M and HCPL4503M Test Circuit for HCPL2530M and HCPL2531M

©2008 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N13XM, HCPLXXXM Rev. 1.0.1 9 Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor OptocouplersPRELIMINARY Package Dimensions Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ Through Hole Surface Mount Note: All dimensions are in inches (millimeters) 0.4" Lead Spacing 8-Pin DIP – Land Pattern (option S) 0.200 (5.08) 0.140 (3.55) 0.100 (2.54) TYP 0.022 (0.56) 0.016 (0.41) 0.020 (0.51) MIN 0.390 (9.91) 0.370 (9.40) 0.270 (6.86) 0.250 (6.35) 0.070 (1.78) 0.045 (1.14) 241 56 7 8 0.300 (7.62) TYP 0.154 (3.90) 0.120 (3.05) 0.016 (0.40) 0.008 (0.20) 15° MAX PIN 1 ID. SEATING PLANE Lead Coplanarity : 0.004 (0.10) MAX 0.270 (6.86) 0.250 (6.35) 0.390 (9.91) 0.370 (9.40) 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0.020 (0.51) MIN 0.070 (1.78) 0.045 (1.14) 0.300 (7.62) TYP 0.405 (10.30) MAX. 0.315 (8.00) MIN 0.045 [1.14] 32 14 56 7 8 0.016 (0.41) 0.008 (0.20) PIN 1 ID. 0.200 (5.08) 0.140 (3.55) 0.100 (2.54) TYP 0.022 (0.56) 0.016 (0.41) 0.004 (0.10) MIN 0.390 (9.91) 0.370 (9.40) 0.270 (6.86) 0.250 (6.35) 0.070 (1.78) 0.045 (1.14) 241 56 7 8 0.400 (10.16) TYP 0.154 (3.90) 0.120 (3.05) 0.016 (0.40) 0.008 (0.20) 0° to 15° PIN 1 ID. SEATING PLANE 0.070 (1.78) 0.060 (1.52) 0.030 (0.76) 0.100 (2.54) 0.295 (7.49) 0.415 (10.54)

©2008 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N13XM, HCPLXXXM Rev. 1.0.1 10 Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor OptocouplersPRELIMINARY

Ordering Information

Option Example Part Number Description No option 6N135M Standard through hole lead form S 6N135SM Surface mount lead bend SD 6N135SDM Surface mount; tape and reel T 6N135TM 0.4" lead spacing V 6N135VM IEC60747-5-2 (approval pending) TV 6N135TVM IEC60747-5-2 (approval pending); 0.4" lead spacing SV 6N135SVM IEC60747-5-2 (approval pending); surface mount SDV 6N135SDVM IEC60747-5-2 (approval pending); surface mount; tape and reel 43 5 Definitions 1F airchild logo 2D evice number

3 IEC60747-5-2 mark (Note: Only appears on parts ordered with this

option – See order entry table) 4T wo digit year code, e.g., ‘08’ 5T wo digit work week ranging from ‘01’ to ‘53’

6 Assembly package code

©2008 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N13XM, HCPLXXXM Rev. 1.0.1 11 Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor OptocouplersPRELIMINARY Carrier Tape Specifications Symbol Description Dimension in mm WT ape Width 16.0 ± 0.3 tT ape Thickness 0.30 ± 0.05 P0 Sprocket Hole Pitch 4.0 ± 0.1 D0 Sprocket Hole Diameter 1.55 ± 0.05 E Sprocket Hole Location 1.75 ± 0.10 FP ocket Location 7.5 ± 0.1 P2 2.0 ± 0.1 PP ocket Pitch 12.0 ± 0.1 A0 Pocket Dimensions 10.30 ±0.20 B0 10.30 ±0.20 K0 4.90 ±0.20 W1 Cover Tape Width 13.2 ± 0.2 dC over Tape Thickness 0.1 max Max. Component Rotation or Tilt 10° R Min. Bending Radius 30 d t 2 User Direction of Feed W E D F P P

©2008 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N13XM, HCPLXXXM Rev. 1.0.1 12 Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor OptocouplersPRELIMINARY Reflow Profile

  • Peak reflow temperature: 260 C (package surface temperature)
  • Time of temperature higher than 183 C for 160 seconds or less
  • One time soldering reflow is recommended

245 C, 10–30 s

Time (Minute) 300 250 200 150 100 Temperature (°C) Time above 183 C, <160 sec Ramp up = 2–10 C/sec

260 C peak

©2008 Fairchild Semiconductor Corporation www.fairchildsemi.com 6N13XM, HCPLXXXM Rev. 1.0.1 13 TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries,a n dis not intended to be an exhaustive list of all such trademarks. Build it Now™ CorePLUS™ CorePOWER™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK EfficentMax™ EZSWITCH™ * Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FlashWriter®* FPS™ F-PFS™ FRFET® Global Power Resource SM Green FPS™ Green FPS™ e-Series™ GTO™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ MotionMax™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® PDP SPM™ Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ Quiet Series™ RapidConfigure™ Saving our world, 1mW/W/kW at a time™ SmartMax™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™ -3 SuperSOT™ -6 SuperSOT™ -8 SupreMOS™ SyncFET™ TheP ower Franchise® TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC® Ultra FRFET™ UniFET™ VCX™ VisualMax™ *E ZSWITCH™ and FlashWriter ® are trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, faileda pplications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technicala n dproduct information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Ful First Production lP roduction Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I36 Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor OptocouplersPRELIMINARY