HCPL0531

HCPL0452 FAIRCHILD

Document overview

• Manufacturer or author: Provided By digicamel.com
• PDF pages: 9

Technical content

Features

High speed – 1 MBit/s 15kV/µs minimum common mode transient immunity at V CM = 1500V (HCPL0453/0534) Open collector output Guaranteed performance over temperature: 0°C to 70°C U.L. recognized (File # E90700) VDE0884 recognized (file#136616) – approval pending for HCPL0530/0531/0453 – ordering option V, e.g., HCPL0500V BSI recognized (file# 8661, 8662) – HCPL0452/0500/0501 only

Applications

Pulse transformer replacement Output interface to CMOS-LSTTL-TTL Wide bandwidth analog coupling

Description

The HCPL05XX, and HCPL04XX optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor housed in a compact 8-pin small outline package. A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. The HCPL04XX devices do not have the base bonded out to a lead for additional noise mar- gin. The HCPL053X devices have two channels per package for optimum mounting density. Truth Table (positive Logic) Package Dimensions LED V O ON LOW OFF HIGH NOTE All dimensions are in inches (millimeters) Lead Coplanarity : 0.004 (0.10) MAX 0.202 (5.13) Pin 1 0.019 (0.48) 0.182 (4.63) 0.021 (0.53) TYP 0.244 (6.19) 0.224 (5.69) 0.143 (3.63) 0.123 (3.13) 0.008 (0.20) 0.003 (0.08) 0.010 (0.25) 0.006 (0.16) SEATING PLANE 0.164 (4.16) 0.144 (3.66) 1 4 5 VF VCC VB VO GND N/C N/C HCPL0500, HCPL0501 *BASE NOT CONNECTED FOR HCPL0452, HCPL0453 4 5 VF1 VCC V01 V02 GND VF2 HCPL0530/HCPL0531/HCPL0534

www.fairchildsemi.com HCLP0XXX Rev. 1.0.3 HCLP0XXX High Speed Transistor Optocouplers Absolute Maximum Ratings A = 25°C unless otherwise specified)

Electrical Characteristics

A = 0 to 70°C Unless otherwise specified) Individual Component Characteristics Symbol Parameter Value Units T STG Storage Temperature -40 to +125 °C T OPR Operating Temperature -40 to +85 °C Reflow Temperature Profile (Refer to page 9) EMITTER I F (avg) DC/Average Forward Input Current 25 mA I F (pk) Peak Forward Input Current (50% duty cycle, 1 ms P .W.) 50 mA I F (trans) Peak Transient Input Current - ([ 1 µs P .W., 300 pps) 1.0 A V R Reverse Input Voltage 5 V P D Input Power Dissipation 45 mW DETECTOR I O (avg) Average Output Current (Pin 6) 8 mA I O (pk) Peak Output Current 16 mA V EBR Emitter-Base Reverse Voltage (HCPL0500/HCPL0501 only) 5 V V CC Supply Voltage -0.5 to 30 V V O Output Voltage -0.5 to 20 V I B Base Current (HCPL0500/HCPL0501 only) 5 mA P D Output power dissipation 100 mW Symbol Parameter Test Conditions Device Min Typ** Max Unit V F EMITTER F = 16 mA, T A = 25°C) All 1.45 1.7 V Input Forward Voltage (I F = 16 mA) 1.8 BV R Input Reverse Breakdown Voltage (I R = 10 µA) All 5.0 V V F T A )T emperature coefficient of forward voltage F = 16 mA) All -1.6 mV/°C I OH DETECTOR F = 0 mA, V O = V CC = 5.5V) A = 25°C) All 0.001 0.5 µA Logic high output current (I F = 0 mA, V O = V CC = 15 V) A =25°C) All 0.005 1 F = 0 mA, V O = V CC = 15 V) All 50 I CCL Logic low supply current (I F = 16 mA, V O = Open) CC = 15 V) HCPL0452/3/ 120 200 µA HCPL0530/1 400 I CCH Logic high supply current (I F = 0 mA, V O = Open) CC = 15 V) (T A = 25°C) All 0.01 1 µA F = 0 mA, V O = Open) CC = 15 V) HCPL0452/3/ HCPL0530/1

www.fairchildsemi.com HCLP0XXX Rev. 1.0.3 HCLP0XXX High Speed Transistor Optocouplers Transfer Characteristics A = 0 to 70°C Unless) All typicals at T A = 25°C Switching Characteristics A = 0 to 70°C unless otherwise specified., V CC = 5 V) Symbol Parameter Test Conditions Device Min Typ Max Unit CTR COUPLED F = 16 mA, V O = 0.4 V) CC = 4.5 V, T A = 25°C) HCPL0500/0530 7 2.7 50 % HCPL0452/3 19 27 50 HCPL0501/0531 Current tranfer ratio (Note 1) F = 16 mA, V O = 0.5V) CC = 4.5 V) HCPL0500 5 30 HCPL0452/3 15 30 HCPL0501/0534 V OL Logic low output voltage (I F = 16 mA, I O = 1.1 mA) CC = 4.5 V, T A = 25°C) HCPL0500 0.18 0.4 V HCPL0530 0.5 F = 16 mA, I O = 3 mA) CC = 4.5 V, T A = 25°C) HCPL0452/3 0.25 0.4 HCPL0501/0531/4 F = 16 mA, I O = 0.8 mA) CC = 4.5) HCPL0500 HCPL0530 0.13 0.5 F = 16 mA, I O = 2.4 mA) CC = 4.5) HCPL0452/3 0.23 0.5 HCPL0501/0531/4 Symbol Parameter Test Conditions Device Min Typ** Max Unit T PHL Propagation delay time to logic low T A = 25°C, (R L = 4.1 k Ω , I F = 16mA) (Note 2) (Fig. 9) HCPL0500/0530 0.45 1.5 µs L = 1.9 k Ω , I F = 16mA) (Note 3) (Fig. 9) T A = 25°C HCPL0452/3 0.45 0.8 HCPL0501/0531/4 L = 4.1 k Ω , I F = 16mA) (Note 2) (Fig. 9) HCPL0500/0530 2.0 L = 1.9 k Ω , I F = 16mA) (Note 3) (Fig. 9) HCPL0452/3 1.0 HCPL0501/0531/4 T PLH Propagation delay time to logic high T A = 25°C, (R L = 4.1 k Ω , I F = 16mA) (Note 2) (Fig. 9) HCPL0500/0530 0.5 1.5 µs L = 1.9 k Ω , I F = 16mA) (Note 3) (Fig. 9) T A = 25°C HCPL0452/3 0.3 0.8 HCPL0501/0531/4 L = 4.1 k Ω , I F = 16mA) (Note 2) (Fig. 9) HCPL0500/0530 2.0 L = 1.9 kΩ, IF = 16mA) (Note 3) (Fig. 9) HCPL0452/3 1.0 HCPL0501/0531/4 |CMH| Common mode transient immunity at logic high F = 0 mA, VCM = 10 VP-P, RL = 4.1kV) (Note 4) (Fig. 10) TA = 25°C HCPL0500 1,000 10,000 V/µs HCPL0530 (IF = 0 mA, VCM = 10 VP-P) TA = 25°C, (RL = 1.9kΩ) (Note 4) (Fig. 10) HCPL0452 1,000 10,000 HCPL0501/31 HCPL0534 15,000 40,000 (IF = 16 mA, VCM = 1500 VP-P, RL = 1.9Ω, TA = 25°C) (Note 4) (Fig. 10) HCPL0453 15,000 40,000 |CML| Common mode transient immunity at logic low F = 16 mA, VCM = 10 VP-P, RL = 4.1kΩ) (Note 4) (Fig. 10) TA = 25°C HCPL0500 1,000 10,000 V/µs HCPL0530 (IF = 16 mA, VCM = 10 VP-P) TA = 25°C, (RL = 1.9kΩ) (Note 4) (Fig. 10) HCPL0452 1,000 10,000 HCPL0501/31 HCPL0534 15,000 40,000 (IF = 16 mA, TA = 25°C, VCM = 1500 VP-P, CL = 15pF) (Note 4) (Fig. 10) HCPL0453 15,000 40,000

4 www.fairchildsemi.com HCLP0XXX Rev. 1.0.3 HCLP0XXX High Speed Transistor Optocouplers Isolation Characteristics (TA = 0°C to +70°C Unless otherwise specified.) All typicals at TA = 25°C NOTES 1 Current Transfer Ratio is designed as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%. 4. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO>2.0 V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO<0.8 V). 5. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted togeth er. 6. 2500 VAC RMS for 1 minute duration is equivalent to 3000 VAC RMS for 1 second duration. Symbol Characteristics Test Conditions Min Typ Max Unit VISO Input-Output Isolation Voltage (note 5, 6) (f = 60 Hz, t = 1.0 min) (II-O ≤ 2 µA) 2500 — — VacRMS RISO Isolation Resistance (note 5) (VI-O = 500 V)(9) 1011 — — _ CISO Isolation Capacitance (note 5) (VI-O = 0 , f = 1.0 MHz)(9) — 0.2 — pF

5 www.fairchildsemi.com HCLP0XXX Rev. 1.0.3 HCLP0XXX High Speed Transistor Optocouplers Typical Performance Curves Fig. 1 Normalized CTR vs. Forward Current IF - FORWARD CURRENT (mA) 0.1 1 10 100 NORMALIZED CTR 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Fig. 2 Normalized CTR vs. Temperature TA - TEMPERATURE (°C) -60 -40 -20 0 20 40 60 80 100 NORMALIZED CTR 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Fig. 3 Output Current vs. Output Voltage VO - OUTPUT VOLTAGE (V) 02468 1 0 1 2 1 4 1 6 1 8 2 0 IO - OUTPUT CURRENT (mA) IF = 5 mA IF = 10 mA IF = 15 mA IF = 20 mA IF = 25 mA IF = 30 mA IF = 35 mA IF = 40 mA Normalized to: IF = 16 mA VO = 0.4 V VCC = 5 V TA = 25°C Normalized to: T A = 25°C IF = 16mA VCC = 5 V VO = 0.4 V Fig. 4 Logic High Output Current vs. Temperature TA - TEMPERATURE (°C) -60 -40 -20 0 20 40 60 80 100 IOH - LOGIC HIGH OUTPUT CURRENT (nA) 0.1 100 1000 Fig. 5 Propagation Delay vs. Temperature TA - TEMPERATURE (°C) -60 -40 -20 0 20 40 60 80 100 Tp - PROPAGATION DELAY (ns) 100 200 300 400 500 600 700 800 RL = 1.9 K (TPHL) R = 4.1 K (TPLH)L RL = 1.9 K (TPLH) RL = 4.1 K (TPLH) Fig. 6 Propagation Delay vs. Load Resistance RL = LOAD RESISTANCE (k ) 1 10 TP - PR OPAGATION DELAY (ns) 100 1000 10000 IF - 16 mA (TPHL) IF - 10 mA (TPHL) IF - 10 mA (TPLH) IF - 16 mA (TPLH) TA = 25°C VCC = 5 V IF = 0 mA VCC = 5 V VO = 5 V IF = 16 mA VCC = 5 V VCC = 5 V TA = 25°C

6 www.fairchildsemi.com HCLP0XXX Rev. 1.0.3 HCLP0XXX High Speed Transistor Optocouplers Pulse Gen CMV VFF B A +5 V OV IF FV Shield Noise O GND V BV CCV LR PLH OLV VO 5 V 1.5 V FI 1.5 V TPHLT Switch at A : I = 0 mAF Switch at A : I = 16 mAF tr VO OV OLV 5 V

0 V 10% 10%

90%CMV 10 V 4 5 Noise Shield +5 V OV VCC V01 V02 GND VF1 F2V FI + 10% DUTY CYCLE I/f < 100∝S FI MONITOR LR C = 1.5 ∝FL Pulse Generator tr = 5ns Z = 50O GND+ 4 5 F2V VF1 Shield Noise +5 V CC V L V V R VO VCM A B Pulse Gen FI I MonitorF I/f < 100∝s 10% D.C. tr = 5ns Generator Pulse Z = 50O VF IF Shield Noise VO O

5 GND

V BV LR CCV +5 V 0.1 ∝F LC = 1.5 ∝F 0.1 ∝F Test Circuit for HCPL0452, HCPL0453, HCPL0500 and HCPL0501 Test Circuit for HCPL0530, HCPL0531 and HCPL0534 Test Circuit for HCPL0452, HCPL0453, HCPL0500 and HCPL0501 Test Circuit for HCPL0530, HCPL0531 and HCPL0534 ft 0.1 ∝F 0.1 ∝F FFV mR mR 90% Fig. 8 Common Mode Immunity Test Circuit Fig. 7 Switching Time Test Circuit

7 www.fairchildsemi.com HCLP0XXX Rev. 1.0.3 HCLP0XXX High Speed Transistor Optocouplers

Ordering Information

Identifier Description V V VDE 0884 (approval pending for HCPL0530, HCPL0531 & HCPL0534) R1 R1 Tape and reel (500 units per reel) R1V R1V VDE 0884 (approval pending for HCPL0530, HCPL0531 & HCPL0534), Tape and reel (500 units per reel) R2 R2 Tape and reel (2500 units per reel) R2V R2V VDE 0884 (approval pending for HCPL0530, HCPL0531 & HCPL0534), Tape and reel (2500 units per reel) Definitions

1 Fairchild logo

2 Device number

3 VDE mark (Note: Only appears on parts ordered with

VDE option – See order entry table) 4 One digit year code, e.g., ‘3’

5 Two digit work week ranging from ‘01’ to ‘53’

6 Assembly package code

8 www.fairchildsemi.com HCLP0XXX Rev. 1.0.3 HCLP0XXX High Speed Transistor Optocouplers Carrier Tape Specifications Reflow Profile 4.0 ± 0.10 Ø1.5 MIN User Direction of Feed 2.0 ± 0.05 1.75 ± 0.10 5.5 ± 0.05 12.0 ± 0.3 8.0 ± 0.10

0.30 MAX

8.3 ± 0.10 3.50 ± 0.20 0.1 MAX 6.40 ± 0.20 5.20 ± 0.20 Ø1.5 ± 0.1/-0 300 280 260 240 220 200 180 160 140 120 100 Time (s) 0 60 180120 270 260°C >245°C = 42 Sec Time above 183°C = 90 Sec 360 1.822°C/Sec Ramp up rate

33 Sec

9 www.fairchildsemi.com HCLP0XXX Rev. 1.0.3 HCLP0XXX High Speed Transistor Optocouplers Rev. I19 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILDíS WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILDíS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms ACEx™ ActiveArray™ Bottomless™ Build it Now™ CoolFET™ CROSSVOLT™ DOME™ EcoSPARK™ E2CMOS™ EnSigna™ FACT™ FAST® FASTr™ FPS™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ I 2C™ i-Lo™ ImpliedDisconnect™ IntelliMAX™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ ScalarPump™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TCM™ TinyLogic TINYOPTO™ TruTranslation™ UHC™ UniFET™ UltraFET® VCX™ Wire™ FACT Quiet Series™ Across the board. Around the world.™ The Power Franchise Programmable Active Droop™ Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.