HCPL0452V Datasheet PDF & Specifications

Manufacturer Specifications

Compare HCPL0452V variants.

Select a manufacturer to view its specifications, local PDF, and searchable HTML text.

2 manufacturers / 2 documents

Manufacturer	Series	Package	Documents	Available	Select specification
Fairchild Semiconductor	-	-	1	PDF HTML	Viewing
ON Semiconductor	-	-	1	PDF HTML	View spec

Online Datasheet

Read the Fairchild Semiconductor document online.

HCPL0452V FAIRCHILD

Document overview

Manufacturer or author: Provided By digicamel.com
PDF pages: 12

Technical content

Features

High speed – 1 MBit/s 15kV/µs minimum commone mode transient immunity at V CM = 1500V (HCPL0453/0534) Open collector output Guaranteed performance over temperature: 0°C to 70°C U.L. recognized (File # E90700) VDE0884 recognized (ﬁle#136616) – approval pending for HCPL0530/0531/0453 – ordering option V, e.g., HCPL0500V BSI recognized (ﬁle# 8661, 8662) – HCPL0452/0500/0501 only

Applications

Pulse transformer replacement Output interface to CMOS-LSTTL-TTL Wide bandwidth analog coupling

Description

The HCPL05XX, and HCPL04XX optocouplers consist of an AlGaAs LED optically coupled to a high speed photo- detector transistor housed in a compact 8-pin small out- line package. A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. The HCPL04XX devices do not have the base bonded out to a lead for additional noise margin. The HCPL053X devices have two channels per package for optimum mounting density. Truth Table (positive Logic) Schematics LED V O ON LOW OFF HIGH 4 5 VF VCC VB VO GND N/C N/C HCPL0500, HCPL0501 *BASE NOT CONNECTED FOR HCPL0452, HCPL0453 4 5 VF1 VCC V01 V02 GND VF2 HCPL0530/HCPL0531/HCPL0534

©2003 Fairchild Semiconductor Corporation www.fairchildsemi.com HCPL0XXX Rev. 1.0.4 2 HCPL0XXX — High Speed Transistor Optocouplers Absolute Maximum Ratings A = 25°C unless otherwise speciﬁed) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Value Units T STG Storage Temperature -40 to +125 °C T OPR Operating Temperature -40 to +85 °C Reﬂow Temperature Proﬁle (Refer to page 11) EMITTER I F (avg) DC/Average Forward Input Current 25 mA I F (pk) Peak Forward Input Current (50% duty cycle, 1ms P .W.) 50 mA I F (trans) Peak Transient Input Current - ([ 1µs P .W., 300 pps) 1.0 A V R Reverse Input Voltage 5 V P D Input Power Dissipation 45 mW DETECTOR I O (avg) Average Output Current (Pin 6) 8 mA I O (pk) Peak Output Current 16 mA V EBR Emitter-Base Reverse Voltage (HCPL0500/HCPL0501 only) 5 V V CC Supply Voltage -0.5 to 30 V V O Output Voltage -0.5 to 20 V I B Base Current (HCPL0500/HCPL0501 only) 5 mA P D Output power dissipation 100 mW

Electrical Characteristics

A = 0 to 70°C unless otherwise speciﬁed) Individual Component Characteristics Transfer Characteristics *All typicals at T A = 25°C Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit EMITTER V F Input Forward Voltage I F = 16mA, T A = 25°C All 1.45 1.7 V I F = 16mA 1.8 BV R Input Reverse Breakdown Voltage I R = 10µA All 5.0 V V F T A Temperature Coefﬁcient of Forward Voltage I F = 16mA All -1.6 mV/°C DETECTOR I OH Logic High Output Current I F = 0mA, V O = V CC = 5.5V, T A = 25°C All 0.001 0.5 µA I F = 0mA, V O = V CC = 15V, T A = 25°C All 0.005 1 I F = 0 mA, V O = V CC = 15V All 50 I CCL Logic Low Supply Current I F = 16mA, V O = Open, V CC = 15V HCPL0452/3/ 120 200 µA HCPL0530/1 400 I CCH Logic High Supply Current I F = 0mA, V O = Open, V CC = 15V, T A = 25°C All 0.01 1 µA I F = 0mA, V O = Open, V CC = 15V HCPL0452/3/ HCPL0530/1 Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit COUPLED CTR Current Tranfer Ratio (Note 1) I F = 16mA, V O = 0.4V, V CC = 4.5V, T A = 25°C HCPL0500/0530 7 2.7 50 % HCPL0452/3 19 27 50 HCPL0501/0531 I F = 16mA, V O = 0.5V, V CC = 4.5V HCPL0500 5 30 HCPL0452/3 15 30 HCPL0501/0534 V OL Logic Low Output Voltage I F = 16mA, I O = 1.1mA, V CC = 4.5V, T A = 25°C HCPL0500 0.18 0.4 V HCPL0530 0.5 I F = 16mA, I O = 3mA, V CC = 4.5V, T A = 25°C HCPL0452/3 0.25 0.4 HCPL0501/0531/4 I F = 16mA, I O = 0.8mA, V CC = 4.5V HCPL0500 HCPL0530 0.13 0.5 I F = 16mA, I O = 2.4mA, V CC = 4.5V HCPL0452/3 0.23 0.5 HCPL0501/0531/4

©2003 Fairchild Semiconductor Corporation www.fairchildsemi.com HCPL0XXX Rev. 1.0.4 4 HCPL0XXX — High Speed Transistor Optocouplers (Continued) (T A = 0 to 70°C unless otherwise speciﬁed) Switching Characteristics TV CC = 5V) Isolation Characteristics *All typicals at T A = 25°C Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit T PHL Propagation Delay Time to Logic LOW T A = 25°C, R L = 4.1k Ω , I F = 16mA (Note 2) (Fig. 9) HCPL0500/0530 0.45 1.5 µs R L = 1.9k Ω , I F = 16mA, T A = 25°C (Note 3) (Fig. 9) HCPL0452/3 0.45 0.8 HCPL0501/0531/4 R L = 4.1k Ω , IF = 16mA (Note 2) (Fig. 9) HCPL0500/0530 2.0 RL = 1.9kΩ, IF = 16mA (Note 3) (Fig. 9) HCPL0452/3 1.0 HCPL0501/0531/4 TPLH Propagation Delay Time to Logic HIGH T A = 25°C, RL = 4.1kΩ, IF = 16mA (Note 2) (Fig. 9) HCPL0500/0530 0.5 1.5 µs RL = 1.9kΩ, IF = 16mA, TA = 25°C (Note 3) (Fig. 9) HCPL0452/3 0.3 0.8 HCPL0501/0531/4 RL = 4.1kΩ, IF = 16mA (Note 2) (Fig. 9) HCPL0500/0530 2.0 RL = 1.9kΩ, IF = 16mA (Note 3) (Fig. 9) HCPL0452/3 1.0 HCPL0501/0531/4 |CMH| Common Mode Transient Immunity at Logic HIGH I F = 0mA, VCM = 10VP-P, RL = 4.1kV, TA = 25°C (Note 4) (Fig. 10) HCPL0500 1,000 10,000 V/µs HCPL0530 IF = 0mA, VCM = 10VP-P, RL = 1.9kΩ TA = 25°C, (Note 4) (Fig. 10) HCPL0452 1,000 10,000 HCPL0501/31 HCPL0534 15,000 40,000 IF = 16mA, VCM = 1500VP-P, RL = 1.9Ω, TA = 25°C (Note 4) (Fig. 10) HCPL0453 15,000 40,000 |CML| Common Mode Transient Immunity at Logic LOW I F = 16mA, VCM = 10VP-P, RL = 4.1kΩ, TA = 25°C (Note 4) (Fig. 10) HCPL0500 1,000 10,000 V/µs HCPL0530 IF = 16 mA, VCM = 10 VP-P, RL = 1.9kΩ (Note 4) (Fig. 10) HCPL0452 1,000 10,000 HCPL0501/31 HCPL0534 15,000 40,000 IF = 16mA, TA = 25°C, VCM = 1500 VP-P, CL = 15pF) (Note 4) (Fig. 10) HCPL0453 15,000 40,000 Symbol Characteristics Test Conditions Min. Typ.* Max . Unit VISO Input-Output Isolation Voltage f = 60 Hz, t = 1.0 min., I I-O ≤ 2µA (Note 5, 6)

2500 Vac RMS

RISO Isolation Resistance V I-O = 500V (Note 5) 10 11 CISO Isolation Capacitance V I-O = 0 , f = 1.0MHz (Note 5) 0.2 pF

©2003 Fairchild Semiconductor Corporation www.fairchildsemi.com HCPL0XXX Rev. 1.0.4 5 HCPL0XXX — High Speed Transistor Optocouplers Notes 1 Current Transfer Ratio is designed as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%. 4. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common mode pulse signal V CM, to assure that the output will remain in a logic high state (i.e., V O>2.0 V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO<0.8 V). 5. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted together. 6. 2500 VAC RMS for 1 minute duration is equivalent to 3000 VAC RMS for 1 second duration.

©2003 Fairchild Semiconductor Corporation www.fairchildsemi.com HCPL0XXX Rev. 1.0.4 6 HCPL0XXX — High Speed Transistor Optocouplers Typical Performance Curves Fig. 1 Normalized CTR vs. Forward Current IF - FORWARD CURRENT (mA) 0.1 1 10 100 NORMALIZED CTR 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Fig. 2 Normalized CTR vs. Temperature TA - TEMPERATURE (°C) -60 -40 -20 0 20 40 60 80 100 NORMALIZED C TR 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Fig. 3 Output Current vs. Output Voltage VO - OUTPUT VOLTAGE (V) 02468 1 0 1 2 1 4 1 6 1 8 2 0 IO - OUTPUT CUR RENT (mA) IF = 5 mA IF = 10 mA IF = 15 mA IF = 20 mA IF = 25 mA IF = 30 mA IF = 35 mA IF = 40 mA Normalized to: IF = 16 mA VO = 0.4 V VCC = 5 V TA = 25°C Normalized to: TA = 25°C IF = 16mA VCC = 5 V VO = 0.4 V Fig. 4 Logic High Output Current vs. Temperature TA - TEMPERATURE (°C) -60 -40 -20 0 20 40 60 80 100 IOH - LOGIC HIGH O UTPUT CURRENT (nA) 0.1 100 1000 Fig. 5 Propagation Delay vs. Temperature TA - TEMPERATURE (°C) -60 -40 -20 0 20 40 60 80 100 Tp - PROPAGATION DELAY (ns) 100 200 300 400 500 600 700 800 RL = 1.9 K (TPHL) R = 4.1 K (TPLH)L RL = 1.9 K (TPLH) RL = 4.1 K (TPLH) Fig. 6 Propagation Delay vs. Load Resistance RL = LOAD RESISTANCE (kΩ ) 1 10 TP - PR OPAGATION DELA Y (ns) 100 1000 10000 IF - 16 mA (TPHL) IF - 10 mA (TPHL) IF - 10 mA (TPLH) IF - 16 mA (TPLH) TA = 25°C VCC = 5 V IF = 0 mA VCC = 5 V VO = 5 V IF = 16 mA VCC = 5 V VCC = 5 V TA = 25°C

©2003 Fairchild Semiconductor Corporation www.fairchildsemi.com HCPL0XXX Rev. 1.0.4 7 HCPL0XXX — High Speed Transistor Optocouplers Pulse Gen CMV VFF B A +5 V OV IF FV Shield Noise O GND V BV CCV LR PLH OLV VO 5 V 1.5 V FI 1.5 V TPHLT Switch at A : I = 0 mAF Switch at A : I = 16 mAF tr VO OV OLV 5 V

0 V 10% 10%

90%CMV 10 V 4 5 Noise Shield +5 V OV VCC V01 V02 GND VF1 F2V FI + 10% DUTY CYCLE I/f < 100µS FI MONITOR LR C = 1.5 µFL Pulse Generator tr = 5ns Z = 50O GND+ 4 5 F2V VF1 Shield Noise +5 V CC V L V V R VO VCM A B Pulse Gen FI I MonitorF I/f < 100µs 10% D.C. tr = 5ns Generator Pulse Z = 50O VF IF Shield Noise VO O

5 GND

V BV LR CCV +5 V 0.1 µF LC = 1.5 µF 0.1 µF Test Circuit for HCPL0452, HCPL0453, HCPL0500 and HCPL0501 Test Circuit for HCPL0530, HCPL0531 and HCPL0534 Test Circuit for HCPL0452, HCPL0453, HCPL0500 and HCPL0501 Test Circuit for HCPL0530, HCPL0531 and HCPL0534 ft 0.1 µF 0.1 µF FFV mR mR 90% Fig. 8 Common Mode Immunity Test Circuit Fig. 7 Switching Time Test Circuit

©2003 Fairchild Semiconductor Corporation www.fairchildsemi.com HCPL0XXX Rev. 1.0.4 8 HCPL0XXX — High Speed Transistor Optocouplers Package Dimensions 8-pin SOIC Surface Mount Recommended Pad Layout Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package speciﬁcations do not expand the terms of Fairchild’s worldwide terms and conditions, speciﬁcally the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www .fairchildsemi.com/packaging/ Lead Coplanarity: 0.004 (0.10) MAX 0.202 (5.13) 0.182 (4.63) 0.021 (0.53) 0.011 (0.28) 0.050 (1.27) Typ. 0.164 (4.16) 0.144 (3.66) 0.244 (6.19) 0.224 (5.69) 0.143 (3.63) 0.123 (3.13) 0.008 (0.20) 0.003 (0.08) 0.010 (0.25) 0.006 (0.16) SEATING P LANE 0.024 (0.61) 0.050 (1.27) Dimensions in inches (mm). 0.155 (3.94) 0.275 (6.99) 0.060 (1.52)

Ordering Information

Option Order Entry Identiﬁer Description V V VDE 0884 (approval pending for HCPL0530, HCPL0531 & HCPL0534) R2 R2 Tape and reel (2500 units per reel) R2V R2V VDE 0884 (approval pending for HCPL0530, HCPL0531 & HCPL0534), Tape and reel (2500 units per reel) Deﬁnitions

1 Fairchild logo

2 Device number

3 VDE mark (Note: Only appears on parts ordered

with VDE option – See order entry table) 4 One digit year code, e.g., ‘3’

5 Two digit work week ranging from ‘01’ to ‘53’

6 Assembly package code

©2003 Fairchild Semiconductor Corporation www.fairchildsemi.com HCPL0XXX Rev. 1.0.4 10 HCPL0XXX — High Speed Transistor Optocouplers Carrier Tape Speciﬁcations 4.0 ± 0.10 Ø1.5 MIN User Direction of Feed 2.0 ± 0.05 1.75 ± 0.10 5.5 ± 0.05 12.0 ± 0.3 8.0 ± 0.10

0.30 MAX

8.3 ± 0.10 3.50 ± 0.20 0.1 MAX 6.40 ± 0.20 5.20 ± 0.20 Ø1.5 ± 0.1/-0

©2003 Fairchild Semiconductor Corporation www.fairchildsemi.com HCPL0XXX Rev. 1.0.4 11 HCPL0XXX — High Speed Transistor Optocouplers Reﬂow Proﬁle Proﬁle Freature Pb-Free Assembly Proﬁle Temperature Min. (Tsmin) 150°C Temperature Max. (Tsmax) 200°C Time (tS) from (Tsmin to Tsmax) 60–120 seconds Ramp-up Rate (tL to tP) 3°C/second max. Liquidous Temperature (TL) 217°C Time (tL) Maintained Above (TL) 60–150 seconds Peak Body Package Temperature 260°C +0°C / –5°C Time (tP) within 5°C of 260°C 30 seconds Ramp-down Rate (TP to TL) 6°C/second max. Time 25°C to Peak Temperature 8 minutes max. Time (seconds) Temperature (°C) Time 25°C to Peak 260 240 220 200 180 160 140 120 100 T L ts tL tP TP Tsmax Tsmin 120 Preheat Area Max. Ramp-up Rate = 3°C/S Max. Ramp-down Rate = 6°C/S 240 360

©2003 Fairchild Semiconductor Corporation www.fairchildsemi.com HCPL0XXX Rev. 1.0.4 12 TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries,a n dis not intended to be an exhaustive list of all such trademarks. Auto-SPM™ Build it Now™ CorePLUS™ CorePOWER™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK EfficentMax™ EZSWITCH™* Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FETBench™ FlashWriter® * FPS™ F-PFS™ FRFET® Global Power Resource SM Green FPS™ Green FPS™ e-Series™ Gmax™ GTO™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ MotionMax™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® PDP SPM™ Power-SPM™ PowerTrench® PowerXS™ Programmable Active Droop™ QFET® QS™ Quiet Series™ RapidConfigure™ Saving our world, 1mW/W/kW at a time™ SmartMax™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™ -3 SuperSOT™ -6 SuperSOT™ -8 SupreMOS™ SyncFET™ Sync-Lock™ ® * TheP ower Franchise® TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ TriFault Detect™ TRUECURRENT™ * µSerDes™ UHC® Ultra FRFET™ UniFET™ VCX™ VisualMax™ XS™ *T rademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, faileda pplications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technicala n dproduct information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I40 First Production HCPL0XXX — High Speed Transistor Optocouplers

Selected Specification

Fairchild Semiconductor HCPL0452V overview.

Change manufacturer

Overview

HCPL0452V is listed in the IC category. Available datasheets include documents from Fairchild Semiconductor, ON Semiconductor. DigiCamel provides a local PDF and searchable HTML technical text for online reference.

Summary

High Speed Transistor Optocouplers

Description

The HCPL05XX, and HCPL04XX optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor housed in a compact 8-pin small outline package.

Source title HCPL0452V Datasheet(PDF) - Fairchild Semiconductor

Related Parts

More parts from the same family.

Browse manufacturer