HC51X ZEMIC
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 3
Technical content
Type HC51x Elevator Indicator Specifications and dimensions are subject to change without notice and do not constitute any liability whatsoever. Zemic Europe B.V. T: +31 76 50 39480 Nr. 2023.06 HC51x Datasheet Rev0 info@zemic.nl Page 1/3 www.zemiceurope.com Short Description
- Pre-calibrated indicator
- Suitable for elevator weighing systems
- Indicates when elevator is loaded for 90%
- Determines if the elevator is overloaded
- When loaded less than 15 kg, the elevator doesn’t move
- Four-digit semi alphanumeric display
- Easy installation, plug and play Available Models Model Power Supply Included in Compatible Elevator Kits HC510 220 VAC Cabin, Under Springs, Into Springs HC512(-V) 24 VDC Cabin, Under Springs, Into Springs
Type HC51x Elevator Indicator Specifications and dimensions are subject to change without notice and do not constitute any liability whatsoever. Zemic Europe B.V. T: +31 76 50 39480 Nr. 2023.06 HC51x Datasheet Rev0 info@zemic.nl Page 2/3 www.zemiceurope.com Technical Features Top-Sensors HC51x Indicator Power Supply HC510: 230VAC ± 10% / 50~60 Hz HC512: 24VDC ± 10% Power Consumption 6 W (max.) Maximum Current Switched by Relay Outputs 10 A / 28VDC Operating Mode continuous Number of Programmable Relay Outputs 3 Setting Threshold Range Loading Set in kg Passenger Availability 0-50 kg 90% 0-4000 kg 0-8000 kg 0-12000 kg 110% 0-4000 kg 0-8000 kg 0-12000 kg Maximum Load Sum of all connected individual loadcells Maximum Permissible Short-time Overload 150% Lower Limit of Transformations 5 kg Maximum Duration of the Conversion Cycle 2 seconds Display 4-digit LED, 14.2mm 7-segment Indicators Overload, Caution, Pre-caution Keypad 3-key flat tactile switches Operating Temperature Range -10 ~ +40˚C Storage Temperature Range -20 ~ +50˚C Humidity 0 ~ 90% @ 20˚C (rel.) Degree of Protection for IEC 60529 (DIN 40050) IP54 Indicator Connection Diagram HC510 version HC512-V version (-V indicates 10V analog output, marked above on left side) NO relay LP 1NO NC relay LP 1NC Input relay LP 1COM NO relay 90% 2NO NC relay 90% 2NC Input relay 90% 2COM NO relay 110% 3NO NC relay 110% 3NC Input relay 110% 3COM Ground sensors GND Sensor signal + SIG+ Sensor signal - SIG- Power sensors + EXC+ Power sensors - EXC- Power supply / GND AC / GND Ground / NA / NA Power supply AC / DC GND SIG+ SIG- EXC+ EXC- GND 24Vdc 1NO 1NC 1COM 2NO 2NC 2COM 3NO 3NC 3COM GND 10V GND SIG+ SIG- EXC+ EXC- 230Vac GND GND 230Vac 24Vdc 1NO 1NC 1COM 2NO 2NC 2COM 3NO 3NC 3COM
Type HC51x Elevator Indicator Specifications and dimensions are subject to change without notice and do not constitute any liability whatsoever. Zemic Europe B.V. T: +31 76 50 39480 Nr. 2023.06 HC51x Datasheet Rev0 info@zemic.nl Page 3/3 www.zemiceurope.com Dimensions in mm Top View Side View Front View HC510 Front View HC512-V Display Keys and Settings Indicator Status Key Functions 110% LED Overload Reset button / Scroll parameter / Increase value 90% LED 90% Load Select a digit / Scroll menu LED Child only in elevator Turn on and off the display / Enter 1234