HC51 EUROQUARTZ
Document overview
- PDF pages: 1
Technical content
Page 1
HC51 SERIES CRYSTALS
DESCRIPTION
HC51 crystals are long-established standard crystals in the industry. Basic specification HC51 crystals provide low frequencies at relatively low cost and have the advantage of low ESR values. A holder variant is the HC48 which has larger diameter leads specifically for socket mounting.
FEATURES
- Low frequencies with low ESR values.
- Available with close tolerances
- Fully customisable specification
- Industry-standard package with options
- Wide frequency range
GENERAL SPECIFICATION
Frequency Range:
100kHz to 70MHz
Calibration Tolerance at 25ºC:
from ±10ppm to ±100ppm
Frequency stability over temp:
from ±10ppm to ±100ppm
Load Capacitance:
8pF to 50pF, or Series
Ageing:
±3ppm max 1st year, ±1ppm max per year after
Drive level:
1mW max
Static capacitance (C0):
9pF max
Holder:
Resistance-weld, hermetic seal
Part Numbers for Holder Variants \*
Holder Type
Holder Designation
Standard 2 lead:
HC51
‘Plug-in’ for use in socket: HC48
OSCILLATION MODE & ESR

PART NUMBER GENERATION
HC51 crystal part numbers are derived as follows:
Example: 1.000MHz HC51/50/100/10/30pF/ATF

Frequency Holder (HC51 or HC48) Calibration Tolerance (±ppm) Temperature Stability (±ppm) Temperature Range (±ppm) Circuit Condition Crystal Cut and Mode
THROUGH-HOLE CRYSTALS
OUTLINES & DIMENSIONS

FREQUENCY STABILITY OVER TEMPERATURE

ü Indicates this stability is available over the stated operating temp. range
CUSTOM PRODUCTION
Euroquartz maintain stocks of certain frequency and specificationHC51 and HC48 crystals. Custom parts are manufactured to order on short lead times. Contact Euroquartz technical sales with your requirement.