HC4052

HD74HC4052 HITACHI

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 16

Technical content

Features

• High Speed Operation
• Wide Operating Voltage
• Low Quiescent Supply Current

Inhibit C* 1 B A HD74HC4052 HD74HC4053 L LLLY 0 X0 Z0 Y0 X0 LL L H Y 1 X1 Z0 Y0 X1 LL H L Y 2 X2 Z0 Y1 X0 L L HHY 3 X3 Z0 Y1 X1 LH L L Z 1 Y0 X0 LH L H Z 1 Y0 X1 LH H L Z 1 Y1 X0 LH H H Z 1 Y1 X1 H XXX— — Note: 1. Not applicable for HD74HC4052 X = Dont’t Care Pin Arrangement HD74HC4052 Y Y Inhibit VEE GND VCC X A B X X X A Y Inhibit Y B (Top view)

Y Z Inhibit VEE GND VCC Y X X A B C Y X X A B Y Z Inhibit Y C (Top view) Block Diagram HD74HC4052 Inh A B GND V EE X Y VCC Level Converter Binary to 1-of-4 Decoder with Inhibit

A B C GND V EE X Z Y VCC Level Converter Binary to 1-of-2 Decoder with Inhibit Absolute Maximum Ratings Item Symbol Rating Unit Supply voltage V CC –0.5 to +7.0 V VCC – VEE –0.5 to +7.0 V Control input voltage V IN GND – 0.5 to VCC + 0.5 V Switch I/O voltage V I/O VEE –0.5 to VCC + 0.5 V Supply current (V CC )I CC +50 mA (GND) I GND –50 mA Switch I/O current (per pin) I I/O –25 mA Control input diode current I IK –20 mA Switch I/O diode current I IOK –20 mA Power dissipation P T 500 mW Storage temperature range Tstg –65 to +150 °C

Recommended Operating Range Item Symbol Min Typ Max Unit Supply voltage V CC – VEE 2— 6V GND – VEE –4 — 0 V Control input voltage V IN 0— V CC V Switch I/O voltage V I/O VEE —V CC V Operating temperature Topr –40 — +85 °C Input rise/fall time VCC = 2.0 V t r, tf 0 — 1000 ns VCC = 4.5 V 0 — 500 ns VCC = 6.0 V 0 — 400 ns

DC Characteristics (VSS = VEE = GND) Ta = 25°C Ta = –40 to +85°C Item Symbol V CC (V) Min Typ Max Min Max Unit Test Conditions Control input voltage VIH 2.0 1.5 — — 1.5 — V 6.0 4.2 — — 4.2 — 6.0 — — 1.8 — 1.8 ON resistance R ON 2.0 — 2000 5000 — 6250 W VINH = VIL 4.5 — 120 180 — 225 V I/O = VCC to VEE 6.0 — 100 170 — 210 I I/O £ 2 mA 2.0 — 200 800 — 1000 W VINH = VIL 4.5 — 80 150 — 190 V I/O = VCC to VEE 6.0 — 70 140 — 175 V I/O £ 2 mA DON resistance DR ON 2 . 0 —5 0——— W VINH = VIL between any two 4.5 — 13 40 — 50 V I/O = VCC to VEE channels 6.0 — 10 20 — 25 I I/O £ 2 mA OFF channel leakage current (switch off) I S (OFF) 6.0 — — –0.1 — –1.0 mAV INH = VIL OFF channel leakage current (switch on) I S (ON) 6.0 — — –0.1 — –1.0 mAV INH = VIL Control input current Iin 6.0 — — –0.1 — –1.0 mA Vin = V CC or VSS Quiescent supply current ICC 6.0 — — 4.0 — 40 mA Vin = V CC or VSS

AC Characteristics (CL = 50 pF, Input tr = tf = 6 ns, VSS = VEE = GND) Ta = 25°C Ta = –40 to +85°C Item Symbol V CC (V) Min Typ Max Min Max Unit Test Conditions Propagation delay tPLH 2.0 — 25 60 — 75 ns R L = 10 kW time 4.5 — 6 12 — 15 Switch input to 6.0 — 5 10 — 13 switch output tPHL 2.0 — 25 60 — 75 ns 4.5 — 6 12 — 15 6.0 — 5 10 — 13 Propagation delay tPLH 2.0 — 50 153 — 191 ns R L = 10 kW time 4.5 — 16 30 — 38 Control input to 6.0 — 14 26 — 33 switch output tPHL 2.0 — 50 153 — 191 ns 4.5 — 16 30 — 38 6.0 — 14 26 — 33 Output enable t ZH 2.0 — 50 153 — 191 ns R L = 1 kW time 4.5 — 14 30 — 38 6.0 — 12 26 — 33 tZL 2.0 — 50 153 — 191 ns 4.5 — 14 30 — 38 6.0 — 12 26 — 33 Output disable t HZ 2.0 — 40 153 — 191 ns R L = 1 kW time 4.5 — 17 30 — 38 6.0 — 14 26 — 33 tLZ 2.0 — 40 153 — 191 ns 4.5 — 17 30 — 38 6.0 — 14 26 — 33 Control input capacitance Cin — — 5 10 — 10 pF Switch input capacitance Cin 5.0 — 5 — — — pF Output capacitance Cout 5.0 — 12 — — — pF HD74HC4052 (Common pin) 5.0 — 6 — — — HD74HC4053 Feed through Cin–out 5.0 — 0.6 — — — pF HD74HC4052 capacitance 5.0 — 0.5 — — — HD74HC4053

AC Characteristics (CL = 50 pF, Input tr = tf = 6 ns, VSS = VEE = GND) (cont) Ta = 25°C Ta = –40 to +85°C Item Symbol V CC (V) Min Typ Max Min Max Unit Test Conditions Power dissipation CPD 5.0 — 32.0 — — — pF HD74HC4052 capacitance 5.0 — 17.0 — — — HD74HC4053 Sine wave distortion 4.5 — 0.1 — — — % f in = 1 kHz, Vin = 4 VP-P R L = 10 kW , CL = 50 pF Frequency response channel “ON” (Sine wave input) 4.5 — 95 — — — MHz f in = 1 MHz, 20 log10 VOS /VIS = –3 dB R L = 50 W , CL = 10 pF Feed through attenuation 4.5 — –50 — — — dB R L = 600 W , CL = 50 pF, fin = 1 MHz Cross talk between 2.0 — 25 — — — mV R L = 600 W , CL = 15 pF, control input and 4.5 — 50 — — — f in = 1 MHz switch I/O 6.0 — 75 — — — Cross talk between any two switches 4.5 — 50 — — — dB R L = 600 W , CL = 50 pF, fin = 1 MHz Maximum control 2.0 — 20 — — — MHz R L = 1 kW , CL = 15 pF frequency 4.5 — 30 — — — Vout = 1/2 (V CC ) 6 . 0 —3 0——— AC Characteristics Test Circuit Maximum Control Frequency VCC VCC Vout VSSVEE VCC Vout Vcc/2 VC 0 V RL= 1kΩ CL= 15pF VC Vin • VCC

Cross talk (Between Any Two Switches) VCC fin R in= 600Ω RL= 600Ω CL= 50pF VCC (ON)Vin 0.1µF Vout1 VCC /2 VCC /2 VSSVEE Vin (Sine Wave) (Vin=0dBm,f=1MHz)VCC R in= 600Ω RL= 600Ω CL= 50pF VCC (OFF) Vout2 VSSVEE Cross talk (Control Input to Switch Output) VCC VC Vin R in= 600Ω RL= 600Ω CL= 50pF VCC Vout VCC /2 V CC /2 VSSVEE VCC 90% tftr 10% (f=1MHz) tr=tr=6ns VSS Feed through Attenuation VCC fin R in= 600Ω RL= 600Ω CL= 50pF VCC (OFF)Vin 0.1µF Vout VCC /2 V CC /2 VSSVEE Vin (Sine Wave) (Vin=0dBm,f=1MHz)

RL= 10kΩ CL= 50pF VCC (ON)Vin 10µF Vout VCC /2 VSSVEE Vin (Sine Wave) (Vin=4Vp-p,f=1kHz) Cin, Cout, Cin–out (Input, Output and Feed through Capacitance) Input Pin Commom Pin VCC (OFF) C in C out C in-out VSSVEE Commom Pin VCC (OFF) C in C out C in-out VSSVEE Frequency Response Channel ON VCC fin RL= 50Ω CL= 10pF VCC (ON)Vin 0.1µF Vout VCC /2 VSSVEE fin (Sine Wave) (Vout=0dBm,f=1MHz)

R ON : ON Resistance VCC Vin VI-O Vout VCC (ON)I/O O/I VSSVEE V IS (OFF): OFF Channel Leakage Current (Switch OFF) VCC Vin=VCC or VSS Vout=VSS or VCC VCC (OFF)I/O VSSVEE A IS (ON): OFF Channel Leakage Current (Switch ON) VCC Vin=VCC or VSS Vout OPEN VCC (ON)I/O VSSVEE A

tPLH , tPHL : Propagation Delay Time (Switch Input to Switch Output) VCC Vin Vout VCC Vin Vout VOL VOH VSS RL= 10kΩ CL= 50pF VCC (ON) VSSVEE tftr tPLH tPHL 90% 10% 50% 50% tPLH , tPHL : Propagation Delay Time (Control Input to Switch Output) VCC VCC or VSS (Switch Input) VSS or VCC VC= Vin Vout Common Pin VCC VC Vout VOL VOH VSS RL= 10kΩ CL= 50pF VCC VSSVEE tPLH tPHL 50% 50% tZH , tZL /tHZ , tLZ : Output Enable and Disable Time VCC VCC VINH Vout Vout VOH VOL VOL VOH VSS VCC VSS VINH =Vin Vout RL= 1kΩ CL= 50pF VCC VSSVEE VSS VCC tf tZH tZL tLZ tHZ tr 90% 50% 10% 50% 50% 10% 90%

(reference value) DP-16 Conforms Conforms 1.07 g Unit: mm 6.30 19.20 16 9 1.3

20.00 Max

7.40 Max

7.62 0.25 + 0.13

0.51 Min

2.54 Min5.06 Max 0° – 15°

1.11 Max

(reference value) FP-16DA Conforms 0.24 g Unit: mm *Dimension including the plating thickness Base material dimension *0.22 – 0.05 *0.42 – 0.08 0.12 0.15 M

2.20 Max

5.5 10.06

0.80 Max

10.5 Max

+ 0.20 – 0.307.80 0.70 – 0.20 0° – 8° 0.10 – 0.10 1.15 1.27 0.40 – 0.06 0.20 – 0.04

(reference value) FP-16DN Conforms Conforms 0.15 g Unit: mm *Dimension including the plating thickness Base material dimension 1.27 16 9 1 8 0.15 0.25 M 1.75 Max 3.95 *0.22 – 0.03 9.9 0° – 8°

10.3 Max

+ 0.10 – 0.306.10 + 0.67 – 0.20 0.60 + 0.11 – 0.04 0.14 *0.42 – 0.08

0.635 Max

0.40 – 0.06 0.20 – 0.03 1.08

1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail- safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 Copyright © Hitachi, Ltd., 1999. All rights reserved. Printed in Japan. Hitachi Asia Pte. Ltd.

16 Collyer Quay #20-00

Tel: 535-2100 Fax: 535-1533 URL NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HXHitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Europe GmbH Electronic components Group Dornacher Stra§e 3 D-85622 Feldkirchen, Munich Germany Fax: <49> (89) 9 29 30 00 Hitachi Semiconductor (America) Inc.

179 East Tasman Drive,

San Jose,CA 95134 For further information write to: