HC4052

74HC4052 PHILIPS

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 27

Technical content

Product specification Supersedes data of 2003 May 16

2004 Nov 11

74HC4052; 74HCT4052 Dual 4-channel analog multiplexer, demultiplexer

2004 Nov 11 2

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052

FEATURES

• Wide analog input voltage range from−5 V to +5 V
• Low ON-resistance: –8 0 Ω (typical) at VCC − VEE = 4.5 V –7 0 Ω (typical) at VCC − VEE = 6.0 V –6 0 Ω (typical) at VCC − VEE = 9.0 V
• Logic level translation: to enable 5 V logic to communicate with±5 V analog signals
• Typical “break before make” built in
• Complies with JEDEC standard no. 7A
• ESD protection: – HBM EIA/JESD22-A114-B exceeds 2000 V – MM EIA/JESD22-A115-A exceeds 200 V.
• Specified from−40 °C to +85°C and−40 °C to +125°C.

APPLICATIONS

• Analog multiplexing and demultiplexing
• Digital multiplexing and demultiplexing
• Signal gating.

DESCRIPTION

The 74HC4052 and 74HCT4052 are high-speed Si-gate CMOS devices and are pin compatible with the HEF4052B. They are specified in compliance with JEDEC standard no. 7A. The 74HC4052 and 74HCT4052 are dual 4-channel analog multiplexers or demultiplexers with common select logic. Each multiplexer has four independent inputs/outputs (pins nY0 to nY3) and a common input/output (pin nZ). The common channel select logics include two digital select inputs (pins S0 and S1) and an active LOW enable input (pin E). When pinE = LOW, one of the four switches is selected (low-impedance ON-state) with pins S0 and S1. When pin E = HIGH, all switches are in the high-impedance OFF-state, independent of pins S0 and S1. V CC and GND are the supply voltage pins for the digital control inputs (pins S0, S1, andE). The VCC to GND ranges are 2.0 V to 10.0 V for 74HC4052 and 4.5 V to 5.5 V for 74HCT4052. The analog inputs/outputs (pins nY0 to nY3 and nZ) can swing between V CC as a positive limit and VEE as a negative limit. VCC − VEE may not exceed 10.0 V. For operation as a digital multiplexer/demultiplexer, VEE is connected to GND (typically ground). FUNCTION TABLE Note 1. H = HIGH voltage level L = LOW voltage level X = don’t care. INPUT (1) CHANNEL BETWEEN ES 1 S 0 L L L nY0 and nZ L L H nY1 and nZ L H L nY2 and nZ L H H nY3 and nZ H X X none

2004 Nov 11 3

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 QUICK REFERENCE DATA VEE = GND = 0 V; Tamb =2 5°C; tr =tf= 6 ns. Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW). PD =C PD × VCC 2 × fi× N+ Σ[(CL +C S)× VCC 2 × fo] where: fi= input frequency in MHz; fo = output frequency in MHz; C L = output load capacitance in pF; C S = maximum switch capacitance in pF; VCC = supply voltage in Volts; N = number of inputs switching; Σ[(C L +C S)× VCC 2 × fo] = sum of the outputs. 2. For 74HC4052 the condition is VI= GND to VCC For 74HCT4052 the condition is VI= GND to VCC − 1.5 V.

ORDERING INFORMATION

SYMBOL PARAMETER CONDITIONS TYPICAL UNIT 74HC4052 74HCT4052 tPZH /tPZL turn-on timeE or Sn to Vos C L = 15 pF; RL =1k Ω ; VCC =5V 28 18 ns tPHZ /tPLZ turn-off timeE or Sn to Vos C L = 15 pF; RL =1k Ω ; VCC =5V 21 13 ns C I input capacitance 3.5 3.5 pF C PD power dissipation capacitance per switch notes 1 and 2 57 57 pF C S maximum switch capacitance independent (Y) 5 5 pF common (Z) 12 12 pF TYPE NUMBER PACKAGE TEMPERATURE RANGE PINS PACKAGE MATERIAL CODE 74HC4052D −40 °C to +125°C 16 SO16 plastic SOT109-3 74HCT4052D −40 °C to +125°C 16 SO16 plastic SOT109-3 74HC4052DB −40 °C to +125°C 16 SSOP16 plastic SOT338-1 74HCT4052DB −40 °C to +125°C 16 SSOP16 plastic SOT338-1 74HC4052N −40 °C to +125°C 16 DIP16 plastic SOT38-9 74HCT4052N −40 °C to +125°C 16 DIP16 plastic SOT38-9 74HC4052PW −40 °C to +125°C 16 TSSOP16 plastic SOT403-1 74HC4052BQ −40 °C to +125°C 16 DHVQFN16 plastic SOT763-1 74HCT4052BQ −40 °C to +125°C 16 DHVQFN16 plastic SOT763-1

2004 Nov 11 4

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 PINNING PIN SYMBOL DESCRIPTION 1 2Y0 independent input or output 2 2Y2 independent input or output 3 2Z common input or output 4 2Y3 independent input or output 5 2Y1 independent input or output E enable input (active LOW) 7V EE negative supply voltage

8 GND ground (0 V)

9 S1 select logic input

10 S0 select logic input

11 1Y3 independent input or output 12 1Y0 independent input or output 13 1Z common input or output 14 1Y1 independent input or output 15 1Y2 independent input or output 16 V CC positive supply voltage handbook, halfpage 4052 MNB039 2Y0 2Y2 2Y3 2Y1 E VEE GND S1 1Y3 1Y0 1Y1 1Y2 VCC Fig.1 Pin configuration DIP16, SO16 and (T)SSOP16. Fig.2 Pin configuration DHVQFN16. (1) The die substrate is attached to this pad using conductive die attach material. It can not be used as a supply pin or input. 001aac117 4052 VCC (1) VEE S0 E 1Y3 2Y1 1Y0 2Y3 1Z 2Z 1Y1 2Y2 1Y2 GND 2Y0 VCC Transparent top view 7 10 6 11 5 12 4 13 3 14 2 15 terminal 1 index area

2004 Nov 11 5

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 handbook, halfpage MNB040 E 2Y3 2Y2 2Y1 2Y0 1Y3 1Y2 1Y1 1Y0 Fig.3 Logic symbol. handbook, halfpage MNB041 9 1 10 0 6 G4 MDX 34 × Fig.4 IEC logic symbol. handbook, full pagewidth MNB042 1 - OF - 4 DECODER LOGIC LEVEL CONVERSION VEEGND VCC 1316 E 1Y0 1Y1 1Y2 1Y3 2Y0 2Y1 2Y2 2Y34 Fig.5 Functional diagram.

2004 Nov 11 6

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 handbook, full pagewidth MNB043 from logic VCC VEE VEE VCC VCC VEE nYn nZ VCC Fig.6 Schematic diagram (one switch). LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to VEE = GND (ground = 0 V); note 1. Notes 1. To avoid drawing VCC current out of pins nZ, when switch current flows in pins nYn, the voltage drop across the bidirectional switch must not exceed 0.4 V. If the switch current flows into pins nZ, no VCC current will flow out of pins nYn. In this case there is no limit for the voltage drop across the switch, but the voltages at pins nYn and nZ may not exceed V CC or VEE . 2. For DIP16 packages: above 70°C derate linearly with 12 mW/K. For SO16 packages: above 70°C derate linearly with 8 mW/K. For SSOP16 and TSSOP16 packages: above 60°C derate linearly with 5.5 mW/K. For DHVQFN16 packages: above 60°C derate linearly with 4.5 mW/K. SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCC supply voltage −0.5 +11.0 V IIK input diode current V I<− 0.5 V or VI> VCC + 0.5 V −± 20 mA ISK switch diode current V S <− 0.5 V or VS > VCC + 0.5 V −± 20 mA IS switch current −0.5 V< VS < VCC + 0.5 V −± 25 mA IEE VEE current −± 20 mA ICC ;IGND VCC or GND current −± 50 mA Tstg storage temperature −65 +150 °C Ptot power dissipation T amb = −40 °C to +125°C; note − 500 mW PS power dissipation per switch − 100 mW

2004 Nov 11 7

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER CONDITIONS 74HC4052 74HCT4052 UNIT VCC supply voltage see Figs 7 and 8 VI input voltage GND − VCC GND − VCC V VS switch voltage V EE − VCC VEE − VCC V Tamb operating ambient temperature see DC and AC characteristics per device t r, tf input rise and fall times VCC = 2.0 V − 6.0 1000 − 6.0 500 ns VCC = 4.5 V − 6.0 500 − 6.0 500 ns VCC = 6.0 V − 6.0 400 − 6.0 500 ns VCC = 10.0 V − 6.0 250 − 6.0 500 ns handbook, halfpage 04 1 2 MNB044 operating area VCC − GND (V) VCC − VEE (V) Fig.7 Guaranteed operating area as a function of the supply voltages for 74HC4052. handbook, halfpage 04 1 2 8 MNB045 operating area VCC − GND (V) VCC − VEE (V) Fig.8 Guaranteed operating area as a function of the supply voltages for 74HCT4052.

2004 Nov 11 8

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 DC CHARACTERISTICS Family 74HC4052 Visis the input voltage at pins nYn or nZ, whichever is assigned as an input; Vos is the output voltage at pins nZ or nYn, whichever is assigned as an output; voltages are referenced to GND (ground = 0 V). SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V) V EE (V) Tamb = −40 °C to +85°C ; note 1 VIH HIGH-level input voltage 2.0 − 1.5 1.2 − V 4.5 − 3.15 2.4 − V 6.0 − 4.2 3.2 − V 9.0 − 6.3 4.7 − V VIL LOW-level input voltage 2.0 −− 0.8 0.5 V 4.5 −− 2.1 1.35 V 6.0 −− 2.8 1.8 V 9.0 −− 4.3 2.7 V ILI input leakage current VI=V CC or GND 6.0 0 −−± 1.0 µA 10.0 0 −−± 2.0 µA IS(OFF) analog switch OFF-state current VI=V IH or VIL; VS =V CC − VEE ; see Fig.9 per channel 10.0 0 −−± 1.0 µA all channels 10.0 0 −−± 2.0 µA IS(ON) analog switch ON-state current VI=V IH or VIL; VS =V CC − VEE ; see Fig.10 10.0 0 −−± 2.0 µA ICC quiescent supply current VI=V CC or GND; Vis=V EE or VCC ; Vos =V CC or VEE 6.0 0 −− 80.0 µA 10.0 0 −− 160.0 µA

2004 Nov 11 9

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 Note 1. All typical values are measured at Tamb =2 5°C. Tamb = −40 °C to +125°C VIH HIGH-level input voltage 2.0 − 1.5 −− V 4.5 − 3.15 −− V 6.0 − 4.2 −− V 9.0 − 6.3 −− V VIL LOW-level input voltage 2.0 −− − 0.5 V 4.5 −− − 1.35 V 6.0 −− − 1.8 V 9.0 −− − 2.7 V ILI input leakage current VI=V CC or GND 6.0 0 −−± 1.0 µA 10.0 0 −−± 2.0 µA IS(OFF) analog switch OFF-state current VI=V IH or VIL; VS =V CC − VEE ; see Fig.9 per channel 10.0 0 −−± 1.0 µA all channels 10.0 0 −−± 2.0 µA IS(ON) analog switch ON-state current VI=V IH or VIL; VS =V CC − VEE ; see Fig.10 10.0 0 −−± 2.0 µA ICC quiescent supply current VI=V CC or GND; Vis=V EE or VCC ; Vos =V CC or VEE 6.0 0 −− 160 µA 10.0 0 −− 320.0 µA SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V) V EE (V)

2004 Nov 11 10

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 Family 74HCT4052 Visis the input voltage at pins nYn or nZ, whichever is assigned as an input; Vos is the output voltage at pins nZ or nYn, whichever is assigned as an output; voltages are referenced to GND (ground = 0 V). Note 1. All typical values are measured at Tamb =2 5°C. SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V) V EE (V) Tamb = −40 °C to +85°C ; note 1 VIH HIGH-level input voltage VIL LOW-level input voltage ILI input leakage current VI=V CC or GND 5.5 0 −−± 1.0 µA IS(OFF) analog switch OFF-state current VI=V IH or VIL; VS =V CC − VEE ; see Fig.9 per channel 10.0 0 −−± 1.0 µA all channels 10.0 0 −−± 2.0 µA IS(ON) analog switch ON-state current VI=V IH or VIL; VS =V CC − VEE ; see Fig.10 10.0 0 −−± 2.0 µA ICC quiescent supply current VI=V CC or GND; Vis=V EE or VCC ; Vos =V CC or VEE 5.5 0 −− 80.0 µA ΔICC additional quiescent supply current per input V I=V CC − 2.1 V; other inputs at VCC or GND 4.5 to 5.5 0 − 45 202.5 µA Tamb = −40 °C to +125°C VIH HIGH-level input voltage VIL LOW-level input voltage ILI input leakage current VI=V CC or GND 5.5 0 −−± 1.0 µA IS(OFF) analog switch OFF-state current VI=V IH or VIL; VS =V CC − VEE ; see Fig.9 per channel 10.0 0 −−± 1.0 µA all channels 10.0 0 −−± 2.0 µA IS(ON) analog switch ON-state current VI=V IH or VIL; VS =V CC − VEE ; see Fig.10 10.0 0 −−± 2.0 µA ICC quiescent supply current VI=V CC or GND; Vis=V EE or VCC ; Vos =V CC or VEE 5.5 0 −− 160.0 µA ΔICC additional quiescent supply current per input V I=V CC − 2.1 V; other inputs at VCC or GND 4.5 to 5.5 0 −− 220.5 µA

2004 Nov 11 11

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 handbook, full pagewidth MNB048 AA nYn nZ VI = VCC or VEE VO = VEE or VCC LOW (from select input) VEE Fig.9 Test circuit for measuring OFF-state current. handbook, full pagewidth MNB049 A nYn nZ VI = VEE or VCC VO (open circuit) HIGH (from select input) VEE Fig.10 Test circuit for measuring ON-state current.

2004 Nov 11 12

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 Resistance RON for 74HC4052 and 74HCT4052 Vis is the input voltage at pins nYn or nZ, whichever is assigned as an input; see notes 1 and 2; see Fig.11. Notes 2. When supply voltages (VCC − VEE ) near 2.0 V the analog switch ON-resistance becomes extremely non-linear. When using a supply of 2 V, it is recommended to use these devices only for transmitting digital signals. 3. All typical values are measured at Tamb =2 5°C. SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V) V EE (V) IS (µA) Tamb = −40 °C to +85°C ; note 3 R ON(peak) ON-resistance (peak) Vis=V CC to VEE ; VI=V IH or VIL 2.0 0 100 −−−Ω 4.5 0 1000 − 100 225 Ω 6.0 0 1000 − 90 200 Ω 4.5 −4.5 1000 − 70 165 Ω R ON(rail) ON-resistance (rail) Vis=V EE ; VI=V IH or VIL 2.0 0 100 − 150 −Ω 4.5 0 1000 − 80 175 Ω 6.0 0 1000 − 70 150 Ω 4.5 −4.5 1000 − 60 130 Ω Vis=V CC ; VI=V IH or VIL 2.0 0 100 − 150 −Ω 4.5 0 1000 − 90 200 Ω 6.0 0 1000 − 80 175 Ω 4.5 −4.5 1000 − 65 150 Ω ΔR ON maximum ON-resistance difference between any two channels V is=V CC to VEE ; VI=V IH or VIL 2.0 0 − −−−Ω 4.5 0 −− 9 −Ω 6.0 0 −− 8 −Ω 4.5 −4.5 −− 6 −Ω Tamb = −40 °C to +125°C R ON(peak) ON-resistance (peak) Vis=V CC to VEE ; VI=V IH or VIL 2.0 0 100 −−−Ω 4.5 0 1000 −− 270 Ω 6.0 0 1000 −− 240 Ω 4.5 −4.5 1000 −− 195 Ω R ON(rail) ON-resistance (rail) Vis=V EE ; VI=V IH or VIL 2.0 0 100 −−−Ω 4.5 0 1000 −− 210 Ω 6.0 0 1000 −− 180 Ω 4.5 −4.5 1000 −− 160 Ω Vis=V CC ; VI=V IH or VIL 2.0 0 100 −−−Ω 4.5 0 1000 −− 240 Ω 6.0 0 1000 −− 210 Ω 4.5 −4.5 1000 −− 180 Ω

2004 Nov 11 13

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 handbook, full pagewidth MNB046 V nYn nZ IisVis = 0 to VCC − VEE HIGH (from select input) VEE Fig.11 Test circuit for measuring RON . handbook, halfpage 100 1.8 3.6 5.4 7.2 MNB047 R ON (Ω ) Vis (V) (1) (2) (3) Fig.12 Typical RON as a function of input voltage Vis. Vis=0V t oV CC − VEE (1) VCC = 4.5 V (2) VCC =6V (3) VCC =9V

2004 Nov 11 14

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 AC CHARACTERISTICS Type 74HC4052 GND = 0 V; tr =tf= 6 ns; CL =5 0p F . Note 1. All typical values are measured at Tamb =2 5°C. SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V) V EE (V) Tamb = −40 °C to +85°C; note1 tPHL /tPLH propagation delay Vis to Vos R L = ∞ ; see Fig.19 2.0 0 − 14 75 ns 4.5 0 − 51 5 n s 6.0 0 − 41 3 n s 4.5 −4.5 − 41 0 n s tPZH /tPZL turn-on timeE, Sn to Vos R L = ∞ ; see Figs 20, 22 and 21 2.0 0 − 105 405 ns 4.5 0 − 38 81 ns 6.0 0 − 30 69 ns 4.5 −4.5 − 26 58 ns tPHZ /tPLZ turn-off timeE, Sn to Vos R L =1k Ω ; see Figs 20, 22 and 21 2.0 0 − 74 315 ns 4.5 0 − 27 63 ns 6.0 0 − 22 54 ns 4.5 −4.5 − 22 48 ns Tamb = −40 °C to +125°C tPHL /tPLH propagation delay Vis to Vos R L = ∞ ; see Fig.19 2.0 0 −− 90 ns 4.5 0 −− 18 ns 6.0 0 −− 15 ns 4.5 −4.5 −− 12 ns tPZH /tPZL turn-on timeE, Sn to Vos R L = ∞ ; see Figs 20, 22 and 21 2.0 0 −− 490 ns 4.5 0 −− 98 ns 6.0 0 −− 83 ns 4.5 −4.5 −− 69 ns tPHZ /tPLZ turn-off timeE, Sn to Vos R L =1k Ω ; see Figs 20, 22 and 21 2.0 0 −− 375 ns 4.5 0 −− 75 ns 6.0 0 −− 64 ns 4.5 −4.5 −− 57 ns

2004 Nov 11 15

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 Type 74HCT4052 GND = 0 V; tr =tf= 6 ns; CL =5 0p F . Note 1. All typical values are measured at Tamb =2 5°C. SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V) V EE (V) Tamb = −40 °C to +85°C ; note 1 tPHL /tPLH propagation delay Visto Vos R L = ∞ ; see Fig.19 4.5 0 − 51 5 n s 4.5 −4.5 − 41 0 n s tPZH /tPZL turn-on timeE, Sn to Vos R L =1k Ω ; see Figs 20, 22 and 21 4.5 0 − 41 88 ns 4.5 −4.5 − 28 60 ns tPHZ tPLZ turn-off timeE, Sn to Vos R L =1k Ω ; see Figs 20, 22 and 21 4.5 0 − 26 63 ns 4.5 −4.5 − 21 48 ns Tamb = −40 °C to +125°C tPHL /tPLH propagation delay Vis to Vos R L = ∞ ; see Fig.19 4.5 0 −− 18 ns 4.5 −4.5 −− 12 ns tPZH /tPZL turn-on timeE, Sn to Vos R L =1k Ω ; see Figs 20, 22 and 21 4.5 0 −− 105 ns 4.5 −4.5 −− 72 ns tPHZ /tPLZ turn-off timeE, Sn to Vos R L =1k Ω ; see Figs 20, 22 and 21 4.5 0 −− 75 ns 4.5 −4.5 −− 57 ns

2004 Nov 11 16

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 Type 74HC4052 and 74HCT4052 Recommended conditions and typical values; GND = 0 V; Tamb =2 5°C; CL =5 0p F .Visis the input voltage at pins nYn or nZ, whichever is assigned as an input. Vos is the output voltage at pins nYn or nZ, whichever is assigned as an output. Notes 1. Adjust input voltage Vis to 0 dBm level (0 dBm = 1 mW into 600Ω ). 2. Adjust input voltage Vis to 0 dBm level at Vos for 1 MHz (0 dBm = 1 mW into 50Ω ). SYMBOL PARAMETER TEST CONDITIONS TYP. UNIT OTHER Vis(p-p) (V) VCC (V) VEE (V) dsin sine-wave distortion f = 1 kHz; RL =1 0kΩ ; see Fig.13 f = 10 kHz; RL =1 0kΩ ; see Fig.13 α OFF(feedthr) switch OFF signal feed-through R L = 600Ω ; f = 1 MHz; see Figs 14 and 15 note 1 2.25 −2.25 −50 dB 4.5 −4.5 −50 dB α ct(s) crosstalk between two switches/multiplexers R L = 600Ω ; f = 1 MHz; see Fig.16 note 1 2.25 −2.25 −60 dB 4.5 −4.5 −60 dB Vct(p-p) crosstalk voltage between control and any switch (peak-to-peak value) R L = 600Ω ; f = 1 MHz;E or Sn, square-wave between VCC and GND, tr =tf= 6 ns; see Fig.17 − 4.5 0 110 mV 4.5 −4.5 220 mV fmax minimum frequency response (−3dB) R L =5 0Ω ; see Figs 13 and 18 note 2 2.25 −2.25 170 MHz 4.5 −4.5 180 MHz C S maximum switch capacitance independent (Y) −−− 5p F common (Z) −−− 12 pF handbook, full pagewidth MNB052 10 µF R L VosVis C L dB nZ/nYnnYn/nZ GNDchannel ON Fig.13 Test circuit for measuring sine-wave distortion and minimum frequency response.

2004 Nov 11 17

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 Fig.14 Test circuit for measuring switch OFF signal feed-through. handbook, full pagewidth MNB053 0.1 µF R L VosVis C L dB nZ/nYnnYn/nZ GNDchannel OFF handbook, full pagewidth0 -□0 -□0 -□0 -□0 -□00 □□□□ Fig.15 Typical switch OFF signal feed-through as a function of frequency. Test conditions: VCC = 4.5 V; GND = 0 V; VEE = −4.5 V; RL =5 0Ω ;Rsource=1k Ω. handbook, full pagewidth MNB054 R L R L0.1 µF nZ/nYnnYn/nZ channel ON (a) C L GND Vis R LR L nZ/nYnnYn/nZ channel OFF (b) C L GND Vos dB Fig.16 Test circuits for measuring crosstalk between any two switches/multiplexers. (a) channel ON condition. (b) channel OFF condition.

2004 Nov 11 18

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 handbook, full pagewidth DUT MNB055 2R L2R L 2R L2R L nZ/nYnnYn/nZ C L oscilloscope VCC VCC GND VEE V(p−p) Sn or E Fig.17 Test circuit for measuring crosstalk between control and any switch. The crosstalk is defined as follows (oscilloscope output): handbook, full pagewidth5 □□□□ Fig.18 Typical frequency response. Test conditions: VCC = 4.5 V; GND = 0 V; VEE = −4.5 V; RL =5 0Ω ; Rsource=1k Ω.

2004 Nov 11 19

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 AC WAVEFORMS handbook, halfpage MNB056 tPLH tPHL 50% 50%Vis input Vos output GND VI VOH VOL Fig.19 Waveforms showing the input (Vis) to output (Vos) propagation delays. handbook, full pagewidth MNB057 tPLZ tr tf tPHZ switch OFF switch ON switch ON Vos output Vos output E, Sn input VM 10% 90% 90% 10% tPZL tPZH 50% 50% Fig.20 Waveforms showing the turn-on and turn-off times. For 74HC4052: VM = 50 %; VI= GND to VCC . For 74HCT4052: VM = 1.3 V; VI= GND to 3 V.

2004 Nov 11 20

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 handbook, full pagewidth MNB059 tTHL (tf)t TLH (tr) VM tW positive input pulse negative input pulse 0 V amplitude90% 10% tTLH (tr)t THL (tf) VM tW 0 V amplitude90% 10% Fig.21 Input pulse definitions. FAMILY AMPLITUDE V M tr and tf fmax ; PULSE WIDTH OTHER 74HC4052 V CC 50 % < 2n s 6n s 74HCT4052 3.0 V 1.3 V < 2n s 6n s handbook, full pagewidth open switch VCC VEE GND VCC Vis VI VO MNB058 D.U.T. C LR T R L PULSE GENERATOR Fig.22 Test circuit for measuring AC performance. TEST SWITCH V is tPZH VEE VCC tPZL VCC VEE tPHZ VEE VCC tPLZ VCC VEE other open pulse Definitions for test circuit: R L = load resistance C L = load capacitance including jig and probe capacitance. R T = termination resistance should be equal to the output impedance ZO of the pulse generator. tr =tf= 6 ns; when measuring fmax , there is no constraint to tr and tf with 50 % duty factor.

2004 Nov 11 21

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 PACKAGE OUTLINES REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOT38-9 97-07-24 03-03-12 M H c M E A L seating plane w Me D Z E pin 1 index b 0 5 10 mm scale Note 1. Plastic or metal protrusions of 0.25 mm (0.01 inch) maximum per side are not included. UNIT A max. b1 (1) (1) (1) b2 cD E e M H ZL mm DIMENSIONS (mm dimensions are derived from the original inch dimensions) A 1 min. A 2 max. b max.wM Ee1 1.65 1.40 0.51 0.41 0.36 0.20 19.3 18.8 6.45 6.24 3.81 7.62 9.40 inches 0.065 0.055 0.020 0.016 0.014 0.008 1.14 0.76 0.045 0.030 0.76 0.74 0.254 0.246 0.150 0.300 0.37 DIP16: plastic dual in-line package; 16 leads (300 mil) SOT38-9 (e1)

2004 Nov 11 22

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 X w M q AA 1 A 2 bp D H E Lp detail X E Z e c L v M A (A )3 A y pin 1 index UNIT A max. A 1 A 2 A 3 bp cD (1) E (1) (1)eH E LL p Zywv q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm inches 1.75 0.25 0.10 1.55 1.40 0.25 0.49 0.36 0.25 0.19 10.0 9.8 4.0 3.8 1.27 6.2 5.8 0.7 0.3 8 o o 0.25 0.1 DIMENSIONS (inch dimensions are derived from the original mm dimensions) Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. 1.0 0.4 SOT109-3 98-12-23 03-02-19 MS-012AC 0.069 0.010 0.004 0.061 0.055 0.01 0.019 0.014 0.0100 0.0075 0.39 0.38 0.16 0.15 0.05 1.05 0.0410.244 0.228 0.028 0.0120.01 0.25 0.01 0.0040.039 0.016 0 2.5 5 mm scale SO16: plastic small outline package; 16 leads; body width 3.9 mm; body thickness 1.47 mmSOT109-3

2004 Nov 11 23

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 UNIT A 1 A 2 A 3 bp cD (1) E (1) eH E LL p QZ ywv q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.21 0.05 1.80 1.65 0.25 0.38 0.25 0.20 0.09 6.4 6.0 5.4 5.2 0.65 1.257.9 7.6 1.03 0.63 0.9 0.7 1.00 0.55 o o0.130.2 0.1 DIMENSIONS (mm are the original dimensions) Note 1. Plastic or metal protrusions of 0.25 mm maximum per side are not included. SOT338-1 99-12-27 03-02-19 (1) w M bp D H E E Z e c v M A X A y 1 8 16 9 q AA 1 A 2 Lp Q detail X L (A )3 MO-150 pin 1 index 0 2.5 5 mm scale SSOP16: plastic shrink small outline package; 16 leads; body width 5.3 mm SOT338-1 A max.

2004 Nov 11 24

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 UNIT A 1 A 2 A 3 bp cD (1) E (2) (1)eH E LL p QZ ywv q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.05 0.95 0.80 0.30 0.19 0.2 0.1 5.1 4.9 4.5 4.3 0.65 6.6 6.2 0.4 0.3 0.40 0.06 o o0.13 0.10.21 DIMENSIONS (mm are the original dimensions) Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. 0.75 0.50 SOT403-1 MO-153 99-12-27 03-02-18 w M bp D Z e 0.25 16 9 q AA 1 A 2 Lp Q detail X L (A )3 H E E c v M A XA y 0 2.5 5 mm scale TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm SOT403-1 A max. 1.1 pin 1 index

2004 Nov 11 25

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 terminal 1 index area 0.51 A 1 EhbUNIT ye 0.2 c REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 3.6 3.4 D h 2.15 1.85 2.6 2.4 1.15 0.85 2.50.30 0.18 0.05 0.00 0.05 0.1 DIMENSIONS (mm are the original dimensions) 0.5 0.3 L 0.1 v 0.05 w 0 2.5 5 mm scale SOT763-1 DHVQFN16: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 16 terminals; body 2.5 x 3.5 x 0.85 mm A (1) max. A c detail X yy1 Ce L Eh D h e b 15 10 X D E C B A terminal 1 index area AC C Bv M w M E (1) Note 1. Plastic or metal protrusions of 0.075 mm maximum per side are not included. D (1) 02-10-17 03-01-27

2004 Nov 11 26

Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 DATA SHEET STATUS Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. LEVEL DATA SHEET STATUS (1) PRODUCT STATUS (2)(3) DEFINITION I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.

© Koninklijke Philips Electronics N.V. 2004 SCA76 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 Printed in The Netherlands R44/04/pp27 Date of release:2004 Nov 11 Document order number: 9397 750 14189