H7710 HAMAMATSU

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 2

Technical content

Type No. H7710-11 H7710-12 H7710-13 H7710-14 H7710-15 H8567-01 H8567-02 H8567-03 H8567-04 H8567-05 185 nm to 750 nm 185 nm to 900 nm 185 nm to 900 nm 185 nm to 830 nm 185 nm to 650 nm High sensitivity in UV to visible range For general applications in UV to near IR range High sensitivity in UV to near IR range Low dark current in UV to near IR range For general applications in UV to visible range Spectral Response Features Product Variations Specifications The H7710/H8567 series photosensor modules contain a high-voltage power supply circuit and a 13-mm (1/2") diameter side-on photomultiplier tube in a compact aluminum housing. The 13-mm (1/2") side-on photomultiplier tube has a reflection mode photocathode that delivers high quantum efficiency at wavelengths above 600 nm, an adequate gain of up to 10 7 and fast time response. A high S/N ratio can be obtained even when measuring extremely low level light at high speeds. The H7710 series uses a Cockcroft-Walton circuit with low power consumption, while the H8567 series has a high-voltage power supply circuit comprised of a Cockcroft-Walton circuit and an active divider circuit to shorten the settling time. Select the desired type that meets your application. Five types are available according to the required spectral response range. Flexible cables are used for easy installation in equipment. Compact Side-on PMT Photosensor Modules H7710/H8567 Series *1: Measured at the peak sensitivity wavelength *2: Control voltage = +1.0 V *3: After 30 minute storage in darkness *4: Cable RG-174/U, Cable length 450 mm, Load resistance = 1 MΩ, Load capacitance = 22 pF *5: The time required for the output to reach a stable level following a change in the control voltage from +1.0 V to +0.5 V. Parameter H7710 / H8567 Series Input Voltage Max. Input Voltage Max. Input Current Max. Output Signal Current Max. Control Voltage Recommended Control Voltage Adjustment Range Effective Area Sensitivity Adjustment Range Peak Sensitivity Wavelength Rise Time * Ripple Noise *2 *4 (peak to peak) Settling Time *5 Operating Ambient Temperature Storage Temperature Weight +11.5 to +15.5 +18 +1.2 (Input impedance H7710 Series: 1 MΩ, H8567 Series: 100 kΩ) +0.25 to +1.0 3.7 × 13.0 1: 104 450 350 500 0.4 105 1000 2000 4.2 × 10 1.4 -20 to +50 100 420 120 100 700 5.2 × 10 400 200 300 0.3 400 2000 5.2 × 10 530 140 200 0.15 300 700 2.5 × 10 0.1 Suffix -13 -03 -11 -01 -12 -02 -14 -04 —-15 -05 340 300 3.6 × 10 0.5 Unit V V mA µA V V mm nm µA/lm mA/W A/lm A/W nA ns mV s g Luminous Sensitivity Blue Sensitivity Index (CS 5-58) Red/White Ratio Radiant Sensitivity * Luminous Sensitivity *2 Radiant Sensitivity *1 *2 Dark Current *2 *3 Min. Typ. Min. Typ. Typ. Max. Max. H7710 Series H8567 Series H7710 Series H8567 Series H7710 Series H8567 Series 0.6 +5 to +50 0.6 0.2 +5 to +45 CathodeAnode

Characteristics (Cathode radiant sensitivity, PMT gain) Sensitivity Adjustment Method Dimensional Outlines (Unit: mm) TPMOB0138EB TPMOB0139EB TPMOB0140EB TPMOC0146EB TPMOA0013ED TPMOA0018ED Details of input window Voltage Programming Resistance Programming WAVELENGTH (nm) CATHODE RADIANT SENSITIVITY (mA/W) 100 1000 100 200 300 400 500 600 700 900 800 0.1 H7710-11 H8567-01 Type H7710-15 H8567-05 Type WAVELENGTH (nm) CATHODE RADIANT SENSITIVITY (mA/W) 1000 100 200 300 400 500 600 700 900 800 100 0.1 H7710-12 H8567-02 Type H7710-13 H8567-03 Type H7710-14 H8567-04 Type CONTROL VOLTAGE (V) PMT GAIN 107 108 106 105 104 103 102 H7710-15 H8567-05 Type H7710-11 H8567-01 Type +15 V GND +15 V GND SIGNAL OUTPUT GND COAXIAL CABLE RED (LOW VOLTAGE INPUT) BLACK (GND) BLUE (Vref OUTPUT) WHITE (Vcontrol INPUT) SIGNAL OUTPUT PHOTOSENSOR MODULE POWER SUPPLY POWER SUPPLYPHOTOSENSOR MODULE +0.25 V to +1.0 V COAXIAL CABLE RED (LOW VOLTAGE INPUT) BLACK (GND) BLUE (Vref OUTPUT) WHITE (Vcontrol INPUT) POTENTIOMETER (10 kΩ) MONITOR CW

  • Electrically insulate the reference voltage output.
  • Adjust the control voltage to adjust the sensitivity. When using a potentiometer, adjust sensitivity while monitoring the control voltage. 19.7 53.2 ± 0.5 EFFECTIVE AREA (3.7 × 13.0) 50.8 ± 0.5 450 ± 20 49.0 ± 0.5 9.5 2.1 3.512.0 ± 0.2 FRONT VIEW SIDE VIEW MOUNTING THREADED HOLE (4-M2 DEPTH: 4) 19.0 ± 0.5 8.8 WINDOW (7 × 16) COAX CABLE OTHER WIRES : RG-174/U : AWG 26 PHOTOCATHODE 20.5 8.8 6.0 1.5 3.7 WINDOW EFFECTIVE AREA (3.7 × 13.0) PHOTOCATHODEWINDOW 9 TOP VIEW FRONT VIEW Current Output Type Photosensor Modules