DATASHEET SEARCH SITE
Document overview
- PDF pages: 2
Technical content
Page 1
Metal Package PMT
Photosensor Modules H12056 Series

The H12056 series is a photosensor module containing a metal package PMT, shutter circuit and a high-voltage power supply circuit. This module has shutter function to avert the PMT from excessive light without switching OFF the PMT voltage completely like the case of opening / closing machine to change the measurement samples. Three types of photocathodes are available, including a super bialkali photocathode that has higher sensitivity than conventional bialkali photocathodes, a multialkali photocathode with sensitivity extending to the near infrared region, and a red sensitivity enhanced multialkali photocathode. Hamamatsu also provides "P" type with low dark count
selected for photon counting measurement.
Product Variations
| Type No. | Spectral Response | Features |
|---|---|---|
| H12056-110 | 230 nm to 700 nm | Super bialkali photocathode, high sensitivity in visible range |
| H12056-01 | 230 nm to 870 nm | For UV to near IR range |
| H12056-20 | 230 nm to 920 nm | Infrared-extended multialkali photocathode with enhanced sensitivity |
| H12056P-110 | 230 nm to 700 nm | For photon counting |
This product can't be used at vacuum environment or reduced pressure environment.
Specifications
(at +25 °C)
| Parameter | H12056 Series | Unit | |||||
|---|---|---|---|---|---|---|---|
| Suffix | -110 / -110P | -01 | -20 | — | |||
| Input Voltage | +4.5 to +5.5 | V | |||||
| Max. Input Voltage | +5.5 | V | |||||
| Max. Input Current *1 | 10 | mA | |||||
| Max. Output Signal Current *2 | 100 | µA | |||||
| Max. Control Voltage | +1.1 (Input Impedance 1 MΩ) | V | |||||
| Recommended Control Voltage Adjustment Range | +0.5 to +1.1 (Input Impedance 1 MΩ) | V | |||||
| Effective Area | 8 | mm | |||||
| Peak Sensitivity Wavelength | 400 | 400 | 630 | nm | |||
| Cathode | Luminous Sensitivity | Min. | 80 | 100 | 350 | µA/lm | |
| Typ. | 105 | 200 | 500 | ||||
| Blue Sensitivity Index (CS 5-58) | Typ. | 13.5 | — | — | — | ||
| Red / White Ratio | Typ. | — | 0.2 | 0.45 | — | ||
| Radiant Sensitivity *3 | Typ. | 110 | 77 | 78 | mA/W | ||
| Anode | Standard Type | Luminous Sensitivity *2 | Min. | 80 | 100 | 350 | A/lm |
| Typ. | 210 | 400 | 1000 | ||||
| Radiant Sensitivity *2 *3 | Typ. | 2.2 × 105 | 1.5 × 105 | 1.5 × 105 | A/W | ||
| Dark Current *2 *4 | Typ. | 1 | 1 | 10 | nA | ||
| Max. | 10 | 10 | 100 | ||||
| P Type Dark Count *2 *4 | Typ. | 50 | — | — | s-1 | ||
| Max. | 100 | — | — | ||||
| Rise Time *2 | 0.57 | ns | |||||
| Ripple Noise *2 *5 (peak to peak) | Max. | 0.6 | mV | ||||
| Settling Time *6 | Max. | 10 | s | ||||
| Operating Ambient Temperature *7 | +5 to +50 | °C | |||||
| Storage Temperature *7 | -20 to +50 | °C | |||||
| Weight | Typ. | 70 | g | ||||
\*1: At +5 V input voltage, +1.0 V control voltage, and output current equal to dark current \*2: Control voltage = +1.0 V \*3: Measured at the peak sensitivity wavelength \*4: After 30 minutes storage in darkness. \*5: Cable RG-174/U, Cable length 450 mm, Load resistance = 1 MΩ, Load capacitance = 22 pF \*6: The time required for the output to reach a stable level following a change in the control voltage from +1.0 V to +0.5 V. \*7: No condensation
Page 2
HAMAMATSU PHOTONICS K.K.
Characteristics (Cathode radiant sensitivity, Gain)


WAVELENGTH (nm)
CONTROL VOLTAGE (V)
Shutter Characteristic

TPMOC0244EA
Dimensional Outlines (Unit: mm)

TOP VIEW
BOTTOM VIEW

1SHUTTER PULSE INPUT 2Vref OUTPUT (+1.2 V) 3Vcont INPUT (+0.5 V to +1.1 V) 4LOW VOLTAGE INPUT (+5 V) 5GND 6SIGNAL GND 7SIGNAL OUTPUT
SIDE VIEW
TPMOA0076EA
HAMAMATSU PHOTONICS K.K.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Electron Tube Division
AUG. 2012
Sensitivity Adjustment Method
VOLTAGE PROGRAMMING
POWER SUPPLY
PHOTOSENNSOR MODULE SIGNAL OUTPUT LOW VOLTAGE INPUT (RED)
+5 V
GND (BLACK)
GND
Vref OUTPUT (BLUE)


the control voltage so it does not exceed +1.1 V.
TPMOC0243EA
Switching Noise Characteristic

OUTPUT 2 mV/div.
SHUTTER SIGNAL INPUT 5 V/div.
2 ms/div.
Options (Optical Fiber Adapter)
(Unit: mm)
E5776 (FC Type)

0.5
GASKET (Supplied)
FRONT VIEW
SIDE VIEW
TACCA0055EA
E5776-51 (SMA Type)

0.5
GASKET (Supplied)
FRONT VIEW
SIDE VIEW
TACCA0239EA
314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: infos@hamamatsu.fr United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: info@hamamatsu.co.uk
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: info@hamamatsu.it
TPMO1053E01
China: Hamamatsu Photonics (China) Co., Ltd.: 1201 Tower B, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: hpc@hamamatsu.com.cn