H11G2SR2M FAIRCHILD

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 9

Technical content

Features

– Minimum 100V for H11G1M – Minimum 80V for H11G2M – Minimum 55V for H11G3M High sensitivity to low input current (Min. 500% CTR at I F = 1mA) Low leakage current at elevated temperature (Max. 100µA at 80°C) Underwriters Laboratory (UL) recognized File # E90700, Volume 2 IEC 60747-5-2 approved (ordering option V)

Applications

The H11GXM series are photodarlington-type optically coupled optocouplers. These devices have a gallium arsenide infrared emitting diode coupled with a silicon darlington connected phototransistor which has an inte- gral base-emitter resistor to optimize elevated tempera- ture characteristics. Schematic Package Outlines EMITTER COLLECTOR ANODE CATHODE

6 BASE

©2007 Fairchild Semiconductor Corporation www.fairchildsemi.com H11G1M, H11G2M, H11G3M Rev. 1.0.4 2 H11G1M, H11G2M, H11G3M — High Voltage Photodarlington Optocouplers Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Value Units TOTAL DEVICE T STG Storage Temperature -40 to +150 °C T OPR Operating Temperature -40 to +100 °C T SOL Lead Solder Temperature (Wave Solder) 260 for 10 sec °C P D Total Device Power Dissipation @ T A = 25°C 260 mW Derate Above 25°C 3.5 mW/°C EMITTER I F Forward Input Current 60 mA V R Reverse Input Voltage 6.0 V I F (pk) Forward Current – Peak (1µs pulse, 300pps) 3.0 A P D LED Power Dissipation @ T A = 25°C 100 mW Derate Above 25°C 1.8 mW/°C DETECTOR V CEO Collector-Emitter Voltage V H11G1M 100 H11G2M 80 H11G3M 55 P D Photodetector Power Dissipation @ T A = 25°C 200 mW Derate Above 25°C 2.67 mW/°C

©2007 Fairchild Semiconductor Corporation www.fairchildsemi.com H11G1M, H11G2M, H11G3M Rev. 1.0.4 3 H11G1M, H11G2M, H11G3M — High Voltage Photodarlington Optocouplers

Electrical Characteristics

A = 25°C unless otherwise specified.) Individual Component Characteristics Transfer Characteristics Isolation Characteristics *All Typical values at T A = 25°C Symbol Characteristic Test Conditions Device Min. Typ.* Max. Unit EMITTER V F Forward Voltage I F = 10mA All 1.3 1.50 V V F T A Forward Voltage Temp. Coefficient All -1.8 mV/°C BV R Reverse Breakdown Voltage I R = 10µA All 3.0 25 V C J Junction Capacitance V F = 0V, f = 1MHz All 50 pF V F = 1V, f = 1MHz 65 I R Reverse Leakage Current V R = 3.0V All 0.001 10 µA DETECTOR BV CEO Breakdown Voltage Collector to Emitter I C = 1.0mA, I F = 0 H11G1M 100 V H11G2M 80 H11G3M 55 BV CBO Collector to Base I C = 100µA H11G1M 100 V H11G2M 80 H11G3M 55 BV EBO Emitter to Base All 7 10 V I CEO Leakage Current Collector to Emitter V CE = 80V, I F = 0 H11G1M 100 nA V CE = 60V, I F = 0 H11G2M V CE = 30V, I F = 0 H11G3M V CE = 80V, I F = 0, T A = 80°C H11G1M 100 µA V CE = 60V, I F = 0, T A = 80°C H11G2M Symbol Characteristics Test Conditions Device Min. Typ.* Max. Units EMITTER CTR Current Transfer Ratio, Collector to Emitter I F = 10mA, V CE = 1V H11G1M/2M 100 (1000) mA (%) I F = 1mA, V CE = 5V H11G1M/2M 5 (500) H11G3M 2 (200) V CE(SAT) Saturation Voltage I F = 16mA, I C = 50mA H11G1M/2M 0.85 1.0 V I F = 1mA, I C = 1mA H11G1M/2M 0.75 1.0 I F = 20mA, I C = 50mA H11G3M 0.85 1.2 SWITCHING TIMES t ON Turn-on Time R L = 100 Ω , I F = 10mA, V CE = 5V, f 30Hz, Pulse Width 300µs All 5 µs t OFF Turn-off Time All 100 µs Symbol Characteristic Test Conditions Device Min. Typ.* Max. Units V ISO Isolation Voltage f = 60Hz, t = 1 sec. All 7500 V AC PEAK R ISO Isolation Resistance V I-O = 500 VDC All 10 Ω C ISO Isolation Capacitance f = 1MHz All 0.2 pF

©2007 Fairchild Semiconductor Corporation www.fairchildsemi.com H11G1M, H11G2M, H11G3M Rev. 1.0.4 4 H11G1M, H11G2M, H11G3M — High Voltage Photodarlington Optocouplers Safety and Insulation Ratings As per IEC 60747-5-2, this optocoupler is suitable for “safe electrical insulation” only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits. Symbol Parameter Min. Typ. Max. Unit Installation Classifications per DIN VDE 0110/1.89 Table 1 For Rated Main Voltage < 150Vrms I-IV For Rated Main voltage < 300Vrms I-IV Climatic Classification 55/100/21 Pollution Degree (DIN VDE 0110/1.89) 2 CTI Comparative Tracking Index 175 V PR Input to Output Test Voltage, Method b, V IORM x 1.875 = V PR , 100% Production Test with tm = 1 sec, Partial Discharge < 5pC 1594 V peak Input to Output Test Voltage, Method a, V IORM x 1.5 = V PR , Type and Sample Test with tm = 60 sec, Partial Discharge < 5pC 1275 V peak V IORM Max. Working Insulation Voltage 850 V peak V IOTM Highest Allowable Over Voltage 6000 V peak External Creepage 7 mm External Clearance 7 mm Insulation Thickness 0.5 mm RIO Insulation Resistance at Ts, V IO = 500V 10 Ω

©2007 Fairchild Semiconductor Corporation www.fairchildsemi.com H11G1M, H11G2M, H11G3M Rev. 1.0.4 5 H11G1M, H11G2M, H11G3M — High Voltage Photodarlington Optocouplers Typical Performance Curves Fig. 1 Output Current vs. Input Current IF – LED INPUT CURRENT(mA) 0.1 1 10 I C – NORMALIZED OUTPUT CURRENT 0.001 0.01 0.1 Normalized to: VCE = 5V IF = 1mA I C – NORMALIZED OUTPUT CURRENT Fig. 2 Normalized Output Current vs. Temperature TA – AMBIENT TEMPERATURE (˚C) -60 -40 -20 0 20 40 60 80 100 120 0.01 0.1 100 IF = 50mA IF = 5mA IF = 1mA IF = 0.5mA I C – NORMALIZED OUTPUT CURRENT VCE – COLLECTOR – EMITTER VOLTAGE (V) 11 0 0.01 0.1 100 IF = 50mA IF = 10mA IF = 2mA IF = 1mA IF = 0.5mA Normalized to: VCE = 5V IF = 1mA TA = 25˚C Normalized to: VCE = 5V IF = 1mA TA = 25˚C Fig. 3 Output Current vs. Collector - Emitter Voltage I CEO – DARK CURRENT (nA) TA – AMBIENT TEMPERATURE (˚C) 01 0 2 0 3 0 4 05 06 07 08 09 0 1 0 0 0.01 0.1 100 1000 Fig. 4 Collector-Emitter Dark Current vs. Ambient Temperature VCE = 30V VCE = 10V VCE = 80V Fig. 5 Input Current vs. Total Switching Speed (Typical Values) ton + toff – TOTAL SWITCHING SPEED (NORMALIZED) 0.1 1 10 IF – FORW ARD CURRENT (mA) 0.1 Normalized to: VCC = 5V IF = 10mA RL = 100Ω RL = 100Ω RL = 1kΩRL = 10Ω

©2007 Fairchild Semiconductor Corporation www.fairchildsemi.com H11G1M, H11G2M, H11G3M Rev. 1.0.4 6 H11G1M, H11G2M, H11G3M — High Voltage Photodarlington Optocouplers Package Dimensions 8.13–8.89 6.10–6.60 Pin 1 3.28–3.53 2.54 (Bsc)(0.86) 0.41–0.51 1.02–1.78 0.76–1.14 8.13–8.89 6.10–6.60 Pin 1 3.28–3.53 2.54 (Bsc)(0.86) 0.41–0.51 1.02–1.78 0.76–1.14 7.62 (Typ.) 15° (Typ.) 0.20–0.30 0.20–0.30 10.16–10.80 Through Hole 0.4" Lead Spacing Surface Mount Rcommended Pad Layout (1.78) (2.54) (1.52) (7.49) (10.54) (0.76) 8.13–8.89 Note: All dimensions in mm. 6.10–6.60 8.43–9.90 Pin 1 0.25–0.36 2.54 (Bsc) (0.86) 0.41–0.51 1.02–1.78 0.76–1.14 0.38 (Min.) 3.28–3.53 5.08 (Max.) 0.20–0.30 0.16–0.88 (8.13)

©2007 Fairchild Semiconductor Corporation www.fairchildsemi.com H11G1M, H11G2M, H11G3M Rev. 1.0.4 7 H11G1M, H11G2M, H11G3M — High Voltage Photodarlington Optocouplers

Ordering Information

Order Entry Identifier (Example) Description No option H11G1M Standard Through Hole Device S H11G1SM Surface Mount Lead Bend SR2 H11G1SR2M Surface Mount; Tape and Reel T H11G1TM 0.4" Lead Spacing V H11G1VM VDE 0884 TV H11G1TVM VDE 0884, 0.4" Lead Spacing SV H11G1SVM VDE 0884, Surface Mount SR2V H11G1SR2VM VDE 0884, Surface Mount, Tape and Reel H11G1 43 5 Definitions 1F airchild logo 2D evice number

3 VDE mark (Note: Only appears on parts ordered with VDE

option – See order entry table) 4 One digit year code, e.g., ‘7’ 5T wo digit work week ranging from ‘01’ to ‘53’

6 Assembly package code

©2007 Fairchild Semiconductor Corporation www.fairchildsemi.com H11G1M, H11G2M, H11G3M Rev. 1.0.4 8 H11G1M, H11G2M, H11G3M — High Voltage Photodarlington Optocouplers Carrier Tape Specification Reflow Profile 4.0 ± 0.1 Ø 1.5 MIN User Direction of Feed 2.0 ± 0.05 1.75 ± 0.10 11.5 ± 1.0 24.0 ± 0.3 12.0 ± 0.1 0.30 ± 0.05 21.0 ± 0.1 4.5 ± 0.20 0.1 MAX 10.1 ± 0.20 9.1 ± 0.20 Ø 1.5 ± 0.1/-0 300 280 260 240 220 200 180 160 140 120 100 Time (s) 0 60 180120 270 260°C >245°C = 42 Sec Time above 183°C = 90 Sec 360 1.822°C/Sec Ramp up rate

33 Sec

©2007 Fairchild Semiconductor Corporation www.fairchildsemi.com H11G1M, H11G2M, H11G3M Rev. 1.0.4 9 TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries,a n dis not intended to be an exhaustive list of all such trademarks. Auto-SPM™ Build it Now™ CorePLUS™ CorePOWER™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK EfficentMax™ EZSWITCH™* Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FETBench™ FlashWriter® * FPS™ F-PFS™ FRFET® Global Power Resource SM Green FPS™ Green FPS™ e-Series™ Gmax™ GTO™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ MotionMax™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® PDP SPM™ Power-SPM™ PowerTrench® PowerXS™ Programmable Active Droop™ QFET® QS™ Quiet Series™ RapidConfigure™ Saving our world, 1mW/W/kW at a time™ SmartMax™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™ -3 SuperSOT™ -6 SuperSOT™ -8 SupreMOS™ SyncFET™ Sync-Lock™ ® * TheP ower Franchise® TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ TriFault Detect™ TRUECURRENT™ * µSerDes™ UHC® Ultra FRFET™ UniFET™ VCX™ VisualMax™ XS™ *T rademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, faileda pplications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technicala n dproduct information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I40 First Production H11G1M, H11G2M, H11G3M — High Voltage Photodarlington Optocouplers