H11AV1 FAIRCHILD

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 10

Technical content

© 2003 Fairchild Semiconductor Corporation PHOTOTRANSISTOR OPTOCOUPLERS H11AV1-M H11AV1A-M H11AV2-M H11AV2A-M

DESCRIPTION

The general purpose optocouplers consist of a gallium arsenide infrared emitting diode driving a silicon phototransistor in a 6-pin dual in-line white package.

FEATURES

  • H11AV1 and H11AV2 feature 0.3" input-output lead spacing
  • H11AV1A and H11AV2A feature 0.4" input-output lead spacing
  • UL recognized (File #E90700, Vol. 2)
  • VDE recognized (File #102497) - Add option V (e.g., H11AV1AV-M)

APPLICATIONS

  • P ower supply regulators
  • Digital logic inputs
  • Microprocessor inputs SCHEMATIC PIN 1. ANODE 2. CATHODE 3. NO CONNECTION 4. EMITTER 5. COLLECTOR 6. BASE 3N C H11AV1S-M, H11AV2S-M H11AV1-M, H11AV2-M H11AV1A-M, H11AV2A-M

© 2003 Fairchild Semiconductor Corporation PHOTOTRANSISTOR OPTOCOUPLERS H11AV1-M H11AV1A-M H11AV2-M H11AV2A-M ABSOLUTE MAXIMUM RATINGS A = 25°C unless otherwise specified) Parameter Symbol Value Units TOTAL DEVICE Storage Temperature T STG -40 to +150 °C Operating Temperature T OPR -40 to +100 °C Wave solder temperature (see page 9 for reflow solder profiles) T SOL 260 for 10 sec °C Total Device Power Dissipation @ T A = 25°C Derate above 25°C P D 250 mW 2.94 mW/°C EMITTER DC/Average Forward Input Current I F 60 mA Reverse Input Voltage V R LED Power Dissipation @ T A = 25°C Derate above 25°C P D 120 mW 1.41 mW/°C DETECTOR Collector-Emitter Voltage V CEO 70 V Collector-Base Voltage V CBO 70 V Emitter-Collector Voltage V ECO Detector Power Dissipation @ T A = 25°C Derate above 25°C P D 150 mW 1.76 mW/°C

© 2003 Fairchild Semiconductor Corporation PHOTOTRANSISTOR OPTOCOUPLERS H11AV1-M H11AV1A-M H11AV2-M H11AV2A-M Note * Typical values at T A = 25°C

ELECTRICAL CHARACTERISTICS

A = 25°C unless otherwise specified) INDIVIDUAL COMPONENT CHARACTERISTICS Parameter Test Conditions Symbol Min Typ* Max Unit EMITTER Input Forward Voltage (I F = 10 mA) T A = 25°C V F 0.8 1.18 1.5 VT A T A = 100°C 0.7 1.05 1.4 Reverse Leakage Current (V R = 6.0 V) I R 10 µA DETECTOR Collector-Emitter Breakdown Voltage (I C = 1.0 mA, I F = 0) BV CEO 70 100 V Collector-Base Breakdown Voltage (I C = 100 µA, I F = 0) BV CBO 70 120 V Emitter-Collector Breakdown Voltage (I E = 100 µA, I F = 0) BV ECO 71 0 V Collector-Emitter Dark Current (V CE = 10 V, I F = 0) I CEO 1 50 nA Collector-Base Dark Current (V CB = 10 V) I CBO 0.5 nA Capacitance (V CE = 0 V, f = 1 MHz) C CE 8p F ISOLATION CHARACTERISTICS Characteristic Test Conditions Symbol Min Typ* Max Units Input-Output Isolation Voltage (f = 60 Hz, t = 1 sec) V ISO

7500 Vac(pk)

Isolation Resistance (V I-O = 500 VDC) R ISO Ω Isolation Capacitance (V I-O = 0 V, f = 1 MHz) C ISO 0.2 2 pF

© 2003 Fairchild Semiconductor Corporation PHOTOTRANSISTOR OPTOCOUPLERS H11AV1-M H11AV1A-M H11AV2-M H11AV2A-M * Typical values at T A = 25°C TRANSFER CHARACTERISTICS A = 25°C Unless otherwise specified.) DC Characteristic Test Conditions Symbol Device Min Typ* Max Unit Current Transfer Ratio, Collector to Emitter (I F = 10 mA, V CE = 10 V) CTR H11AV1 H11AV1A 100 300 % H11AV2 H11AV2A 50 Collector-Emitter Saturation Voltage (I C = 2 mA, I F = 20 mA) V CE (SAT) All 0.4 V AC Characteristic Non-Saturated Turn-on Time (I C = 2 mA, V CC = 10 V, R L = 100 Ω (Fig. 11) T ON All 15 µs Non Saturated Turn-off Time C = 2 mA, V CC = 10 V, R L = 100 Ω (Fig. 11) T ON All 15 µs

© 2003 Fairchild Semiconductor Corporation PHOTOTRANSISTOR OPTOCOUPLERS H11AV1-M H11AV1A-M H11AV2-M H11AV2A-M TYPICAL PERFORMANCE CURVES Fig. 2 Normalized CTR vs. Forward Current IF - FORWARD CURRENT (mA) 02468 1 0 1 2 14 16 18 20 NOR MALIZED CTR 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 VCE = 5.0V TA = 25°C Normalized to IF = 10 mA Fig. 3 Normalized CTR vs. Ambient Temperature TA - AMBIENT TEMPERATURE (°C) -60 -40 -20 0 20 40 60 80 100 NORMALIZED CTR 0.2 0.4 0.6 0.8 1.0 1.2 1.4 IF = 5 mA IF = 10 mA IF = 20 mA Normalized to IF = 10 mA TA = 25°C IF - LED FORWARD CURRENT (mA) VF - FORWARD VOLTAGE (V) Fig. 1 LED Forward Voltage vs. Forward Current 11 0 100 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 TA = 25°C TA = -55°C TA = 100°C Fig. 5 CTR vs. RBE (Saturated) RBE- BASE RESISTANCE (k Ω) NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN)) 10 100 1000 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 IF = 20 mA IF = 10 mA IF = 5 mA VCE= 0.3 V Fig. 4 CTR vs. RBE (Unsaturated) RBE- BASE RESISTANCE (kΩ) NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN)) 10 100 1000 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 VCE= 5.0 V IF = 20 mA IF = 10 mA IF = 5 mA 0.01 0.1 1 10 0.001 0.01 0.1 100 IF = 5 mA IF = 20 mA IF = 10 mA Fig. 6 Collector-Emitter Saturation Voltage vs Collector Current IC - COLLECTOR CURRENT (mA) VCE (SAT) - COLLECTOR-EMITTER SATURATION VOLTAGE (V) IF = 2.5 mA TA = 25˚C

Figure 11. Switching Time Test Circuit and Waveforms

© 2003 Fairchild Semiconductor Corporation PHOTOTRANSISTOR OPTOCOUPLERS H11AV1-M H11AV1A-M H11AV2-M H11AV2A-M NOTE All dimensions are in inches (millimeters) Package Dimensions (Through Hole) Package Dimensions (Surface Mount) Package Dimensions (0.4” Lead Spacing) Recommended Pad Layout for Surface Mount Leadform 0.350 (8.89) 0.320 (8.13) 0.260 (6.60) 0.240 (6.10) 0.320 (8.13) 0.070 (1.77) 0.040 (1.02) 0.014 (0.36) 0.010 (0.25) 0.200 (5.08) 0.115 (2.93) 0.100 (2.54) 0.015 (0.38) 0.020 (0.50) 0.012 (0.30) Pin 1 ID SEATING PLANE 0.350 (8.89) 0.320 (8.13) 0.260 (6.60) 0.240 (6.10) 0.390 (9.90) 0.332 (8.43) 0.070 (1.77) 0.040 (1.02) 0.014 (0.36) 0.010 (0.25) 0.320 (8.13) 0.035 (0.88) 0.006 (0.16) 0.012 (0.30) 0.008 (0.20) 0.200 (5.08) 0.115 (2.93) 0.025 (0.63) 0.020 (0.51) 0.020 (0.50) 0.016 (0.41) 0.100 [2.54] PIN 1 ID SEATING PLANE 0.350 (8.89) PIN 1 ID 0.320 (8.13) 0.260 (6.60) 0.240 (6.10) 0.070 (1.77) SEATING PLANE 0.010 (0.25) 0.200 (5.08) 0.115 (2.93) 0.020 (0.50) 0.016 (0.41) 0.100 [2.54] 0.100 (2.54) 0.015 (0.38) 0.012 (0.30) 0.008 (0.21) 0.425 (10.80) 0.400 (10.16) 0.070 (1.78) 0.060 (1.52) 0.030 (0.76) 0.100 (2.54) 0.305 (7.75) 0.425 (10.79)

© 2003 Fairchild Semiconductor Corporation PHOTOTRANSISTOR OPTOCOUPLERS H11AV1-M H11AV1A-M H11AV2-M H11AV2A-M

ORDERING INFORMATION

Order Entry Identifier Order Entry Identifier Option Example S Surface Mount Lead Bend H11AV1S-M SR2 Surface Mount; Tape and reel H11AV1SR2-M N/A 0.4" Lead Spacing H11AV1A-M V VDE 0884 H11AV1V-M N/A VDE 0884, 0.4" Lead Spacing H11AV1AV-M SV VDE 0884, Surface Mount H11AV1SV-M SR2V VDE 0884, Surface Mount, Tape & Reel H11AV1SR2V-M H11AV1 V X YY Q White Package 43 5 *Note – Parts built in the white package (M suffix) that do not have the ‘V’ option (see definition 3 above) that are marked with date code ‘325’ or earlier are marked in the portrait format. Definitions 1F airchild logo 2D evice number

3 VDE mark (Note: Only appears on parts ordered with VDE

option – See order entry table)

4 One digit year code

  • One digit for white package parts, e.g., ‘3’ 5T wo digit work week ranging from ‘01’ to ‘53’

6 Assembly package code

© 2003 Fairchild Semiconductor Corporation PHOTOTRANSISTOR OPTOCOUPLERS H11AV1-M H11AV1A-M H11AV2-M H11AV2A-M Reflow Profile Carrier Tape Specifications 4.0 ± 0.1 Ø 1.5 MIN User Direction of Feed 2.0 ± 0.05 1.75 ± 0.10 11.5 ± 1.0 24.0 ± 0.3 12.0 ± 0.1 0.30 ± 0.05 21.0 ± 0.1 4.5 ± 0.20 0.1 MAX 10.1 ± 0.20 9.1 ± 0.20 Ø 1.5 ± 0.1/-0 Ramp up = 2–10°C/sec • Peak reflow temperature: 245°C (package surface temperature)

  • Time of temperature higher than 183°C for 120–180 seconds
  • One time soldering reflow is recommended 230°C, 10–30 s Time (Minute) 300 250 200 150 100 Temperature (°C) Time above 183°C, 120–180 sec 245°C peak

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. Page 10 of 10 © 2003 Fairchild Semiconductor Corporation PHOTOTRANSISTOR OPTOCOUPLERS H11AV1-M H11AV1A-M H11AV2-M H11AV2A-M