GW-CAMLBA-EM AMSOSRAM

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 19

Technical content

GW CAMLBA.EM DATASHEETDATASHEET 1 | Version 1.6 | 2026-05-05 www.osram-os.com GW CAMLBA.EM Datasheet Published by ams-OSRAM AG Tobelbader Strasse 30, 8141 Premstaetten, Austria Phone +43 3136 500-0 ams-osram.com © All rights reserved

GW CAMLBA.EM DATASHEETDATASHEET 2 | Version 1.6 | 2026-05-05 SOLERIQ™ S 12 GW CAMLBA.EM The SOLERIQ™ S products were specifically designed for ap- plications requiring large flux packages out of a compact area.

Applications

  • Indoor lighting

Features

  • Package: Chip-on-Board - Typ. Radiation: 120° (Lambertian emitter) - Color temperature: 3000K - 5000K - CRI: 80 (min.) - ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) - Luminous Flux: typ. 3260 lm @ 3000 K, 25 °C - Luminous efficacy: typ. 124 lm/W @ 3000 K, 25 °C

GW CAMLBA.EM DATASHEETDATASHEET 3 | Version 1.6 | 2026-05-05

Ordering Information

Type Color temperature Luminous Flux 1) Ordering Code IF = 240 mA ΦV GW CAMLBA.EM-TQUP-30S3 3000 K 3040 ... 4840 lm Q65113A0943 GW CAMLBA.EM-TQUP-35S3 3500 K 3040 ... 4840 lm Q65113A0975 GW CAMLBA.EM-TQUP-40S3 4000 K 3040 ... 4840 lm Q65113A0942 GW CAMLBA.EM-TQUP-50S3 5000 K 3040 ... 4840 lm Q65113A0941

GW CAMLBA.EM DATASHEETDATASHEET 4 | Version 1.6 | 2026-05-05 Maximum Ratings Parameter Symbol Values Operating Temperature Top min. max. -40 °C 105 °C Storage Temperature Tstg min. max. -40 °C 105 °C Junction Temperature Tj max. 125 °C Forward Current TJ = 25 °C IF max. 320 mA Reverse voltage 2) VR Not designed for reverse operation ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) VESD 2 kV

GW CAMLBA.EM DATASHEETDATASHEET 5 | Version 1.6 | 2026-05-05 Characteristics IF = 240 mA; TJ = 25 °C Parameter Symbol Values Viewing angle at 50% IV 2φ typ. 120 ° Forward Voltage 3) VF typ. 108.50 V Reverse current 2) IR Not designed for reverse operation Color Rendering Index 4) CRI min. 80 Electrical thermal resistance junction/solderpoint with efficiency ηe = 41.36 % RthJS elec. typ. 0.94 K / W

GW CAMLBA.EM DATASHEETDATASHEET 6 | Version 1.6 | 2026-05-05 Brightness Groups Group Luminous Flux 1) Luminous Flux 1) IF = 240 mA IF = 240 mA min. max. ΦV ΦV TQ 3040 lm 3300 lm TR 3300 lm 3590 lm TS 3590 lm 3900 lm TT 3900 lm 4190 lm TU 4190 lm 4500 lm UP 4500 lm 4840 lm

GW CAMLBA.EM DATASHEETDATASHEET 7 | Version 1.6 | 2026-05-05 Chromaticity Coordinate Groups 5) Chromaticity Coordinate Groups Group Cx Cy CCT 30A 0.4296 0.4043 3000 0.4382 0.4105 3000 0.4382 0.4021 3000 30B 0.4296 0.3959 3000 0.4296 0.4043 3000 0.4382 0.4021 3000 35A 0.4033 0.3939 3500 0.4124 0.4008 3500 0.4121 0.3919 3500 Group Cx Cy CCT 35B 0.4030 0.3850 3500 0.4033 0.3939 3500 0.4121 0.3919 3500 40A 0.3775 0.3805 4000 0.3867 0.3875 4000 0.3861 0.3787 4000 40B 0.3769 0.3717 4000 0.3775 0.3805 4000 0.3861 0.3787 4000 Group Cx Cy CCT 50A 0.3408 0.3555 5000 0.3480 0.3623 5000 0.3484 0.3547 5000 50B 0.3408 0.3555 5000 0.3484 0.3547 5000 0.3412 0.3479 5000

GW CAMLBA.EM DATASHEETDATASHEET 8 | Version 1.6 | 2026-05-05 Group Name on Label Example: TQ-30A Brightness Color Chromaticity TQ 30A

GW CAMLBA.EM DATASHEETDATASHEET 9 | Version 1.6 | 2026-05-05 Relative Spectral Emission 6) Φrel = f (λ); IF = 240 mA; TJ = 25 °C GW CAMLBA.EM (SA) 350 400 450 500 550 600 6507 00 7508 00 /g79/n m 0,0 0,2 0,4 0,6 0,8 1,0/g41rel :V /g79 :w hite Radiation Characteristics 6) Irel = f (ϕ); TJ = 25 °C GW CAMLBA.EM (SA) -100° -90° -80° -70° -60° -50° -40° -30° ϕ /° 0,0 0,2 0,4 0,6 0,8 1,0 Irel :0 °

GW CAMLBA.EM DATASHEETDATASHEET 10 | Version 1.6 | 2026-05-05 Forward current 6) IF = f(VF); TJ = 25 °C GW CAMLBA.EM(SA) 95,6 110,598 100 102 104 106 108 VF /V 320 100 150 200 250 300 IF /m A Relative Luminous Flux 6), 7) Φv/Φv(240 mA) = f(IF); TJ = 25 °C GW CAMLBA.EM(SA) 20 320100 150 200 250 IF /m A 0,0 0,2 0,4 0,6 0,8 1,0 1,2ΦV ΦV(240mA) Chromaticity Coordinate Shift 6) ΔCx, ΔCy = f(IF); TJ = 25 °C GW CAMLBA.EM(SA) 20 320100 150 200 250 IF /m A -0,03 -0,02 -0,01 0,00 0,01 0,02 0,03∆Cx ∆Cy : ∆ Cx : ∆ Cy

GW CAMLBA.EM DATASHEETDATASHEET 11 | Version 1.6 | 2026-05-05 Forward Voltage 6) ΔVF = VF - VF(25 °C) = f(Tj); IF = 240 mA GW CAMLBA.EM(SA) 02 04 06 08 0 100 Tj /° C -2,5 -2,0 -1,5 -1,0 -0,5 0,0 0,5 1,0∆VF /V Relative Luminous Flux 6) Φv/Φv(25 °C) = f(Tj); IF = 240 mA GW CAMLBA.EM(SA) 02 04 06 08 0 100 Tj /° C 0,0 0,2 0,4 0,6 0,8 1,0 1,2Φv Φv(25°C) Chromaticity Coordinate Shift 6) ΔCx, ΔCy = f(Tj); IF = 240 mA GW CAMLBA.EM(SA) 02 04 06 08 0 100 Tj /° C -0,03 -0,02 -0,01 0,00 0,01 0,02 0,03∆Cx ∆Cy : ∆ Cx : ∆ Cy

GW CAMLBA.EM DATASHEETDATASHEET 12 | Version 1.6 | 2026-05-05 Max. Permissible Forward Current 8) IF = f(T) 02 04 06 08 0 100 Ts /° C 100 150 200 250 300 350IF /m A Do notu se below 20 mA

GW CAMLBA.EM DATASHEETDATASHEET 13 | Version 1.6 | 2026-05-05 Dimensional Drawing 9) Dimensional Drawing 9) Further Information: Approximate Weight: 1,869.6 mg

GW CAMLBA.EM DATASHEETDATASHEET 14 | Version 1.6 | 2026-05-05 Tray 9) 20 pieces per tray Barcode-Product-Label (BPL)

GW CAMLBA.EM DATASHEETDATASHEET 15 | Version 1.6 | 2026-05-05 Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this data sheet fall into the class moderate risk (exposure time 0.25 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye ex- ists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. When looking at bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoy- ance, visual impairment, and even accidents, depending on the situation. Subcomponents of this device contain, in addition to other substances, metal filled materials including silver. Metal filled materials can be affected by environments that contain traces of aggressive substances. There- fore, we recommend that customers minimize device exposure to aggressive substances during storage, production, and use. Devices that showed visible discoloration when tested using the described tests above did show no performance deviations within failure limits during the stated test duration. Respective failure limits are described in the IEC60810. This device is designed for specific/recommended applications only. Please consult OSRAM Opto Semiconductors Sales Staff in advance for detailed information on other non-recommended applications (e.g. automotive). Change management for this component is aligned with the requirements of the lighting market. For further application related information please visit https://ams-osram.com/support/application-notes

GW CAMLBA.EM DATASHEETDATASHEET 16 | Version 1.6 | 2026-05-05 Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version on our website. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Product and functional safety devices/applications or medical devices/applications Our components are not developed, constructed or tested for the application as safety relevant component or for the application in medical devices. Our products are not qualified at module and system level for such application. In case buyer – or customer supplied by buyer – considers using our components in product safety devices/ applications or medical devices/applications, buyer and/or customer has to inform our local sales partner immediately and we and buyer and /or customer will analyze and coordinate the customer-specific request between us and buyer and/or customer.

GW CAMLBA.EM DATASHEETDATASHEET 17 | Version 1.6 | 2026-05-05 Glossary 1) Brightness: Brightness values are measured during a current pulse of typically 10 ms, with a tolerance of +/- 7%. 2) Reverse Operation: Not designed for reverse operation. Continuous reverse operation can cause mi- gration and damage of the device. 3) Forward Voltage: The Forward voltage is measured during a current pulse duration of typically 1 ms with a tolerance of ± 0.05V . 4) Color reproduction index: Color reproduction index values (CRI-RA) are measured during a current pulse of typically 10 ms and with a tolerance of ±2. 5) Chromaticity coordinate groups: Chromaticity coordinate groups are measured during a current pulse duration of typically 10ms with a tolerance of ±0.005. 6) Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devic- es, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could dif- fer from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 7) Characteristic curve: In the range where the line of the graph is broken, you must expect higher differ- ences between single devices within one packing unit. 8) Thermal Resistance: Rth max is based on statistic values (6σ) used for Derating. 9) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±0.1 and dimensions are specified in mm.

GW CAMLBA.EM DATASHEETDATASHEET 18 | Version 1.6 | 2026-05-05

Revision History

1.0 2020-09-04 Initial Version 1.0 2020-09-04 Initial Version 1.1 2022-04-14 New Layout 1.2 2022-09-28 Applications 1.3 2023-02-07 Ordering Information 1.4 2023-04-11 Tray 1.5 2025-05-05 Dimensional Drawing 1.6 2026-05-05 Certificate Logo

GW CAMLBA.EM DATASHEETDATASHEET 19 | Version 1.6 | 2026-05-05 Published by ams-OSRAM AG Tobelbader Strasse 30, 8141 Premstaetten, Austria Phone +43 3136 500-0 ams-osram.com © All rights reserved