DATASHEET SEARCH SITE
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 16
Technical content
GENERALPLUS TECHNOLOGY INC. reserves the right to change this documentation without prior notice. Information provided by GENERALPLUS TECHNOLOGY INC. is believed to be accurate and reliable. However, GENERALPLUS TECHNOLOGY INC. makes no warranty for any errors which may appear in this document. Contact GENERALPLUS TECHNOLOGY INC. to obtain the latest version of device specifications before placing your order. No responsibility is assumed by GENERALPLUS TECHNOLOGY INC. for any infringement of patent or other rights of third parties which may result from its use. In addition, GENERALPLUS products are not authorized for use as critical components in life support devices/systems or aviation devices/systems, where a malfunction or failure of the product may reasonably be expected to result in significant injury to the user, without the express written approval of Generalplus. DATA SHEET Aug. 16, 2016 Version 1.1 GGPPYY00002299CC GGPPYY00002299DD LLiinneeaarr RReegguullaattoorr
© Generalplus Technology Inc. Proprietary & Confidential 2 Aug. 16, 201 6 Version: 1.1 Table of Contents PAGE
© Generalplus Technology Inc. Proprietary & Confidential 3 Aug. 16, 201 6 Version: 1.1 LINEAR REGULATOR 1. GENERAL DESCRIPTION GPY0029C and GPY0029D are voltage regulator s with ultra -low quiescent current and manufactured by CMOS process. They are able to operate through a +7.0V input range and delivers up to 300mA driving current. GPY0029C features a low voltage detection (RESET pin, active low ) to assure its operation under a low voltage condition; it is an open-drain output. In GPY0029D, it has a chip enable input (active high) and during shutdown mode (EN=Low), GPY0029D only consumes less than 0.1uA. 2. APPLICATION Battery-powered equipment Hand-held communication equipment Audio/Video system Toy 3. FEATURES Low Quiescent Current (Typ. 4.0A @ VIN = 5.0V) High Current Driving Capability 5.0V)(SOT-89) 5.0V)(SOT-25) Over Current Limitation (Typ. 480mA @ VIN = 5.0V ) Thermal Shutdown Protection (Typ. 150℃) Small Dropout Voltage (Typ. 40mV @ IOUT = 1.0mA) Low Temperature-Drift Coefficient of Output Voltage (Typ. ±50ppm/ Excellent Line Regulation (Typ. 0.15%/V) High Accuracy Output Voltage (±3%) RESET output pin for low VOUT detection Only One Capacitor Required (Capacitance Range:1F ~ 47F, ESR Range: 0 ~ 2 Ω) SOT-89 and SOT-25 Package or Dice Form 4. BLOCK DIAGRAM VREF & OVP CKT. Current Sensing VDD OTA Buffer COUT Poly Fuse Trim PAD VOUT LDO CMP1 RESET VOUT=VREF x (1+R2/R1) VREF GND GND External Device GND EN
© Generalplus Technology Inc. Proprietary & Confidential 4 Aug. 16, 201 6 Version: 1.1 5. SIGNAL DESCRIPTIONS 5.1. 4-PIN Only for Chip On Board (GPY0029C-COB) Mnemonic PIN No. PAD No. Type Description RESET 1 5 O Open Drain Reset Output, Low Reset GND 2 4 G Chip Ground VOUT 3 2 O Output Regulated Voltage VIN 4 1 I Input Voltage FB 3 3 I Regulator Feedback Input. FB pad must be bonded to VOUT pin 5.2. 3-PIN (GPY0029C-SOT-89) Mnemonic PIN No. Type Description GND 1 G Chip Ground VIN 2 I Input Voltage VOUT 3 O Output Regulated Voltage 5.3. 5-PIN (GPY0029D-SOT-25) Mnemonic PIN No. Type Description VIN 1 P Input Voltage GND 2 G Chip Ground EN 3 I Chip Enable (Active High). It should be a pull-low 100kΩ resistor to GND when the control signal is floating. NC 4 NC No connection. VOUT 5 O Output Regulated Voltage 5.4. PIN Configuration Customize COB-4pin SOT-89 GPY0029B / 29B-30 COB 1 2 GPY0029B / 29B-30 1 2 3 Customize COB-4pin SOT-25 GPY0029C - XX GPY0029C - XX GPY0029D - XX
© Generalplus Technology Inc. Proprietary & Confidential 5 Aug. 16, 201 6 Version: 1.1 6. ELECTRICAL SPECIFICATIONS 6.1. Absolute Maximum Ratings Characteristic Symbol Rating Unit Input Voltage VIN +7.0V V Output Voltage VOUT -0.3 ~ (VIN + 0.3) V Operating Temperature TOPT 0 - 70 ℃ Storage Temperature TSTG -40 - 125 ℃ Power Consumption PWATT 500 ~ 625 (COB) 570 (SOT-89) 400 (SOT-25) mW Note1: Stresses beyond those given in the “Absolute Maximum Ratings” table may cause permanent damage to the device. For normal operational conditions, see Electrical Characteristic. Note2: PWATT = (VIN - VOUT) x IOUT 6.2. Thermal Characteristics Characteristics Symbol Value Unit 6.3. DC Characteristic for GPY0029C-XX Item Test Conditions Symbol Min. Typ. Max. Unit Input Voltage VIN 2.4 - 7.0 V Output Voltage Accuracy IOUT = 1mA VOUT -3 - +3 % Output Current VIN = VOUT + 0.4V and VIN ≧ 3.7V IOUT 300 - - mA Current Limit VIN ≧ 3.7V ILIM 400 480 - mA Load Regulation VIN = 5.0V, 1mA ≦ IOUT ≦ 300mA △ VOUT - 40 60 mV Line Regulation IOUT = 1mA, VOUT + 0.5V ≦ VIN ≦ 7.0V VoutΔVin ΔVout - 0.15 - %/V Dropout Voltage IOUT = 1mA, Vin = VOUT (normal), VDIF = VIN - VOUT , VOUT = 3.3V VDIF - 40 60 mV Quiescent Current IOUT = 0 ISS - 4.0 7.5 A Temperature Coefficient IOUT = 10mA, O C ≦ TOPT ≦ 70 O C , VOUT = 3.3V ΔT ΔVout - ±50 - ppm/℃ RESET Output Low Voltage RESET Output Sinking 2mA VOL - 50 100 mV Output High Leakage Current VRESET = 5V IRESET - - 100 nA Threshold to Output Voltage Rising edge, referred to VOUT VRSTH - VOUT x 0.87 - V Threshold to Output Voltage Falling edge, referred to VOUT VRSTL - VOUT x 0.80 - V Power-ON Reset Delay Time See Timing Diagram TDPOR - 0.1 - mS VOUT Reset Delay Time See Timing Diagram TDL - 0.2 - mS Thermal Shutdown Temperature IOUT = 1mA TOTP 130 150 170 ℃ Thermal Shutdown Hysteresis IOUT = 1mA THYS - 25 - ℃ Note1: VOUT (normal) @ VIN = 5.0V, IOUT = 1mA, Vout = 3.0V / 3.3V, TOPT = 25 OC
© Generalplus Technology Inc. Proprietary & Confidential 6 Aug. 16, 201 6 Version: 1.1 6.4. DC Characteristic for GPY0029D-XX Item Test Conditions Symbol Min. Typ. Max. Unit Input Voltage VIN 2.4 - 7.0 V Output Voltage Accuracy IOUT = 1mA VOUT -3 - +3 % Output Current VIN = VOUT + 0.4V and VIN ≧ 3.7V IOUT 300 - - mA Current Limit VIN ≧ 3.7V ILIM 400 480 - mA Load Regulation VIN = 5.0V, 1mA ≦ IOUT ≦ 300mA △ VOUT - 40 60 mV Line Regulation IOUT = 1mA, VOUT + 0.5V ≦ VIN ≦ 7.0V VoutΔVin ΔVout - 0.15 - %/V Dropout Voltage IOUT = 1mA, Vin = VOUT (normal), VDIF = VIN - VOUT , VOUT = 3.3V VDIF - 40 60 mV Quiescent Current VEN = 5.0V. Enable and IOUT = 0 ISS - 4.0 7.5 A VEN = 3.0V. Enable and IOUT = 0 - 7.5 15 VEN = 1.2V. Enable and IOUT = 0 - 15 30 Shutdown Current VEN = 0V. Shutdown. SHDN - 0.1 1 A Temperature Coefficient IOUT = 10mA, O C ≦ TOPT ≦ 70 O C , VOUT = 3.3V ΔT ΔVout - ±50 - ppm/℃ EN Input Bias Current VEN = VIN = 5.0V IEN - - 100 nA Thermal Shutdown Temperature IOUT = 1mA TOTP 130 150 170 ℃ Thermal Shutdown Hysteresis IOUT = 1mA THYS - 25 - ℃ Note1: VOUT (normal) @ VIN = 5.0V, IOUT = 1mA, Vout = 3.0V / 3.3V, TOPT = 25℃.
© Generalplus Technology Inc. Proprietary & Confidential 7 Aug. 16, 201 6 Version: 1.1 6.5. Typical Operating Characteristics 2.850 2.900 2.950 3.000 3.050 3.100 3.150 3.200 3.250 3.300 3.350 Intput Voltage (V) Output Voltage (V) Iout=1mA Iout=50mA Iout=150mA Iout=300mA 6.5.2. Load transient response; IOUT = 50mA to 300mA 6.5.3. Load transient response; IOUT = 1mA to 50mA 6.5.4. Load transient response; IOUT = 0mA to 300mA 6.5.5. Line transient response; IOUT = 1mA 6.5.6. Line transient response; IOUT = 50mA CH1: IOUT CH2: VOUT CH1: IOUT CH2: VOUT CH1: 500mV CH2: 50.0mV M 100μs CH1: 100mV CH2: 20.0mV M 100μs (ΔVOUT = 32mV) (ΔVOUT = 26mV) VIN = 5.0V; IOUT =50mA to 300mA & tr=tf=10μs; COUT=1μF VIN = 5.0V; IOUT =1mA to 50mA & tr=tf=10μs; COUT=1μF (ΔVOUT = 9mV) 50mA 300mA 1mA 50mA CH1: IOUT CH2: VOUT CH1: 500mV CH2: 50.0mV M 100μs (ΔVOUT = 44mV) (ΔVOUT = 44mV) VIN = 5.0V; IOUT =50mA to 300mA & tr=tf=10μs; COUT=1μF 0mA 300mA (ΔVOUT = 10mV) CH1: VIN CH2: VOUT (ΔVOUT = 32mV) (ΔVOUT = 76mV) VIN = 4.5V to 5.0V; IOUT =50mA & tr=tf=10μs; COUT=10μF 4.5V 5.0V CH1: 200mV CH2: 50.0mV M 100μs CH1: VIN CH2: VOUT (ΔVOUT = 25mV) (ΔVOUT = 34mV) VIN = 4.5V to 5.0V; IOUT =1mA & tr=tf=10μs; COUT=10μF 4.5V 5.0V CH1: 200mV CH2: 50.0mV M 100μs
© Generalplus Technology Inc. Proprietary & Confidential 8 Aug. 16, 201 6 Version: 1.1 6.6. Application Circuit 6.6.1. 4-PIN COB (with Reset Function) Note1: FB pad must be bonded to VOUT pin in COB. 6.6.2. 3-PIN COB or SOT-89 Package (no Reset Function) Note1: FB pad must be bonded to VOUT pin in COB or package. 6.6.3. 5-PIN SOT-25 Package (with Enable Function) VIN VOUT/FB RESET GND GND VIN GND VOUT RESET 10μF 10μF GPY0029C - XX RRST 100kΩ (Close to VIN pin) (Close to VOUT pin) VIN VOUT/FB GND GND VIN GND VOUT 10μF 10μF GPY0029C - XX (Close to VIN pin) (Close to VOUT pin) VIN VOUT/FB EN GND GND VIN GND VOUT 10μF 10μF GPY0029D - XX EN REN 100kΩ (Close to VIN pin) (Close to VOUT pin)
© Generalplus Technology Inc. Proprietary & Confidential 9 Aug. 16, 201 6 Version: 1.1 6.7. Reset Timing Diagram VIN VOUT 3.3V TDL t t TDPOR 3.3Vx87% 3.3Vx80% TDL VRESET t
© Generalplus Technology Inc. Proprietary & Confidential 10 Aug. 16, 201 6 Version: 1.1 7. PACKAGE/PAD LOCATIONS 7.1. PAD Assignment and Locations VOUT ( 0 , 0 ) GNDRESET VIN FB This IC substrate should be connected to VSS Note1: To ensure IC functions properly, please bond all of VDD and VSS pins. Note2: FB pad must be bonded to VOUT pin in COB or SOT89 package. 7.2. Ordering Information Product Number Output Voltage (V) Package Type Package Marking GPY0029C - 15 - C 1.5 Chip form (VOUT = 1.5V ±3%) N/A GPY0029C - 28 - C 2.8 Chip form (VOUT = 2.8V ±3%) N/A GPY0029C - 30 - C 3.0 Chip form (VOUT = 3.0V ±3%) N/A GPY0029C - C 3.3 Chip form (VOUT = 3.3V ±3%) N/A GPY0029C - 15 - HE011 1.5 Package form – SOT-89 (VOUT = 1.5V ±3%) Y29C15 GPY0029C - 28 - HE011 2.8 Package form – SOT-89 (VOUT = 2.8V ±3%) Y29C28 GPY0029C - 30 - HE011 3.0 Package form – SOT-89 (VOUT = 3.0V ±3%) Y29C30 GPY0029C - HE011 3.3 Package form – SOT-89 (VOUT = 3.3V ±3%) Y29C GPY0029C - 15 - EE011 1.5 Package form (Tape & reel) – SOT-89 (VOUT = 1.5V ±3%) Y29C15 GPY0029C - 28 - EE011 2.8 Package form (Tape & reel) – SOT-89 (VOUT = 2.8V ±3%) Y29C28 GPY0029C - 30 - EE011 3.0 Package form (Tape & reel) – SOT-89 (VOUT = 3.0V ±3%) Y29C30 GPY0029C - EE011 3.3 Package form (Tape & reel) – SOT-89 (VOUT = 3.3V ±3%) Y29C GPY0029D - 15 - HE021 1.5 Package form – SOT-25 (VOUT = 1.5V ±3%) Y29D15 GPY0029D - 18 - HE021 1.8 Package form – SOT-25 (VOUT = 1.8V ±3%) Y29D18 GPY0029D - 28 - HE021 2.8 Package form – SOT-25 (VOUT = 2.8V ±3%) Y29D28 GPY0029D - HE021 3.3 Package form – SOT-25 (VOUT = 3.3V ±3%) Y29D GPY0029D - 15 - EE021 1.5 Package form (Tape & reel) – SOT-25 (VOUT = 1.5V ±3%) Y29D15 GPY0029D - 18 - EE021 1.8 Package form (Tape & reel) – SOT-25 (VOUT = 1.8V ±3%) Y29D18 GPY0029D - 28 - EE021 2.8 Package form (Tape & reel) – SOT-25 (VOUT = 2.8V ±3%) Y29D28 GPY0029D - EE021 3.3 Package form (Tape & reel) – SOT-25 (VOUT = 3.3V ±3%) Y29D
© Generalplus Technology Inc. Proprietary & Confidential 11 Aug. 16, 201 6 Version: 1.1 7.3. Package Information 7.3.1. 3-PIN SOT-89 package size D H EL C POLISHED(2X) e A 100(2X) B Symbol Min. Max. Unit A 1.40 1.60 Millimeter B 0.44 0.56 Millimeter B1 0.36 0.48 Millimeter C 0.35 0.44 Millimeter D 4.40 4.60 Millimeter D1 1.35 1.83 Millimeter E 2.29 2.60 Millimeter H 3.94 4.25 Millimeter e 1.50 BSC Millimeter e1 3.00 BSC Millimeter L 0.89 1.2 Millimeter
© Generalplus Technology Inc. Proprietary & Confidential 12 Aug. 16, 201 6 Version: 1.1 7.3.2. 5-PIN SOT-25 package size Symbol Min. Max. Unit A 1.45 Millimeter A1 0.00 0.15 Millimeter A2 0.90 1.30 Millimeter b 0.30 0.50 Millimeter c 0.08 0.22 Millimeter D 2.90 BSC Millimeter E 2.80 BSC Millimeter E1 1.60 BSC Millimeter e 0.95 BSC Millimeter e1 1.90 BSC Millimeter L 0.30 0.60 Millimeter L1 0.60 REF. Millimeter L2 0.25 BSC Millimeter R 0.10 - Millimeter R1 0.10 0.25 Millimeter θ 0° 8° θ1 5° 15°
© Generalplus Technology Inc. Proprietary & Confidential 13 Aug. 16, 201 6 Version: 1.1 7.3.3. 4-PIN Chip On Board (COB) bonding diagram 7.4. Storage Condition and Period for Package Package Moisture sensitivity level Max. Reflow temperature Floor life storage condition Dry pack SOT LEVEL 3 220 +5/-0℃ N/A No Note1: Please refer to IPC/JEDEC standard J-STD-020A and EIA JEDEC stand JFSD22-A112. Note2: Or refer to the “CAUTION Note” on dry pack bag. 7.5. Recommended SMT Temperature Profile This “Recommended” temperature profile is a rough guideline for SMT process reference. Most of our lead-frame-based products choose Matte Tin and Sn/Bi for plating recipe. For PPF (Pre-Plated Frame) product with 63/37 solder pa ste, we recommend 240℃~245℃ for peak temperature. GPY0029C - XX Pin: 4 (VIN) Pin: 3 (VOUT) Pin: 2 (GND) Pin: 1 (RESET)
© Generalplus Technology Inc. Proprietary & Confidential 14 Aug. 16, 201 6 Version: 1.1
© Generalplus Technology Inc. Proprietary & Confidential 15 Aug. 16, 201 6 Version: 1.1 8. DISCLAIMER The information appearing in this publication is believed to be accurate. Integrated circuits sold by Generalplus Technology are covered by the warranty and patent indemnification provis ions stipulated in the terms of sale only. GENERALPLUS makes no warranty, express, statutory implied or by description regarding the information in this publication or regarding the freedom of the described chip(s) from patent infringement. FURTHERMORE, GENERALPLUS MAKES NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE. GENERALPLUS reserves the right to halt production or alter the specifications and prices at any time without notice. Accordingly, the reader is cautioned to verify that the data sheets and other information in this publication are current before placing orders. Products described herein are intended for use in normal commercial applications. Applications involving unusual environmental or reliability requirements, e.g. military equipment or medical life support equipment, are specifically not recommended without additional processing by GENERALPLUS for such applications. Please note that application circuits illustrated in this document are for reference purposes only.
© Generalplus Technology Inc. Proprietary & Confidential 16 Aug. 16, 201 6 Version: 1.1 9. REVISION HISTORY Date Revision # Description Page Aug. 16, 2016 1.1 Modify pin define table of 5-PIN (GPY0029D-SOT-25) in section 5.3. 4 Jun. 30, 2016 1.0 Modify DC Characteristic for GPY0029D-XX in section 6.4. Modify Ordering Information in section 7.2. Mar. 19, 2015 0.2 Modify FEATURES in section 3. Modify DC Characteristic for GPY0029C-XX in section 6.3. Modify DC Characteristic for GPY0029D-XX in section 6.4. Modify Ordering Information in section 7.2. Jan. 14, 2015 0.1 Original 16