GFJTLPS1.24

GFJTLPS1.24 OSRAM

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 23

Technical content

GF JTLPS1.24 DATASHEETDATASHEET 1 | Version 1.5 | 2023-02-23 www.osram-os.com GF JTLPS1.24 Datasheet Published by ams-OSRAM AG Tobelbader Strasse 30, 8141 Premstaetten, Austria Phone +43 3136 500-0 ams-osram.com © All rights reserved

GF JTLPS1.24 DATASHEETDATASHEET 2 | Version 1.5 | 2023-02-23 DURIS® E 2835 GF JTLPS1.24 The DURIS® E 2835 color family provide excellent color ren- dering and supreme efficacy in cost effective industry standard LED. DURIS® E 2835 never fails to impress with its perfor- mance on system level.

Applications

• Agriculture & Horticulture - Entertainment - Indoor Lighting

Features

• Package: white SMT package, colorless clear silicone resin - Typ. Radiation: 120° (Lambertian emitter) - ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) - Radiant Flux: typ. 103 mW - Radiant Efficiency: typ. 36 % - Photosynthetic Photon Flux: typ. 0.08 μmol/s

GF JTLPS1.24 DATASHEETDATASHEET 3 | Version 1.5 | 2023-02-23

Ordering Information

Type Total radiant flux 1) Ordering Code IF = 150 mA ΦE GF JTLPS1.24-KXK5-1-1 90 ... 130 mW Q65113A1050

GF JTLPS1.24 DATASHEETDATASHEET 4 | Version 1.5 | 2023-02-23 Maximum Ratings Parameter Symbol Values Operating Temperature Top min. max. -40 °C 100 °C Storage Temperature Tstg min. max. -40 °C 100 °C Junction Temperature Tj max. 125 °C Forward current IF min. max. 10 mA 180 mA Surge Current t ≤ 10 µs; D = 0.005 ; TJ = 25 °C IFS max. 250 mA ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) VESD 2 kV Note: Ensure the appropriate derating current is being used in order to maintain a junction temperature which is lower than the maximum allowable limit.

GF JTLPS1.24 DATASHEETDATASHEET 5 | Version 1.5 | 2023-02-23 Characteristics IF = 150 mA; TJ = 25 °C Parameter Symbol Values Centroid Wavelength IF = 150 mA λcentroid typ. 727 nm Dominant Wavelength 2) IF = 150 mA λdom min. max. 710 nm 740 nm Spectral Bandwidth at 50% Irel,max ∆λ typ. 36 nm Viewing angle at 50% IV 2φ typ. 120 ° Forward Voltage 3) IF = 150 mA VF min. typ. max. 1.7 V 1.9 V 2.1 V Reverse current 4) IR Not designed for reverse operation Electrical thermal resistance junction/solderpoint with efficiency ηe = 37 % RthJS elec. typ. 11 K / W

GF JTLPS1.24 DATASHEETDATASHEET 6 | Version 1.5 | 2023-02-23 Brightness Groups Group Total radiant flux 1) Total radiant flux 1) IF = 150 mA IF = 150 mA ΦE ΦE Φp Φp Φp,b Φp,b KX 90 mW 95 mW 0.08 µmol/s 0.08 µmol/s 0.27 µmol/J 0.54 µmol/s 0.57 µmol/s 1.95 µmol/J KY 95 mW 100 mW 0.08 µmol/s 0.08 µmol/s 0.29 µmol/J 0.57 µmol/s 0.60 µmol/s 2.05 µmol/J KZ 100 mW 105 mW 0.08 µmol/s 0.09 µmol/s 0.30 µmol/J 0.60 µmol/s 0.63 µmol/s 2.16 µmol/J K1 105 mW 110 mW 0.09 µmol/s 0.09 µmol/s 0.32 µmol/J 0.63 µmol/s 0.66 µmol/s 2.26 µmol/J K2 110 mW 115 mW 0.09 µmol/s 0.10 µmol/s 0.33 µmol/J 0.66 µmol/s 0.69 µmol/s 2.37 µmol/J K3 115 mW 120 mW 0.10 µmol/s 0.10 µmol/s 0.35 µmol/J 0.69 µmol/s 0.72 µmol/s 2.47 µmol/J K4 120 mW 125 mW 0.10 µmol/s 0.11 µmol/s 0.36 µmol/J 0.72 µmol/s 0.75 µmol/s 2.58 µmol/J K5 125 mW 130 mW 0.11 µmol/s 0.11 µmol/s 0.38 µmol/J 0.75 µmol/s 0.78 µmol/s 2.68 µmol/J Note: [*] Photosynthetic Photon Flux includes wavelengths between 400 and 700 nm Note: [**] Photon Flux includes wavelengths between 280 and 800 nm Note: PPF and PF values are for reference only Forward Voltage Groups Group Forward Voltage 3) Forward Voltage 3) IF = 150 mA IF = 150 mA min. max. VF VF D2 1.7 V 1.8 V E1 1.8 V 1.9 V E2 1.9 V 2.0 V F1 2.0 V 2.1 V

GF JTLPS1.24 DATASHEETDATASHEET 7 | Version 1.5 | 2023-02-23 Centroid Wavelength Group

GF JTLPS1.24 DATASHEETDATASHEET 8 | Version 1.5 | 2023-02-23 Group Name on Label Example: K1-1-D2 Brightness Wavelength Forward Voltage K1 1 D2

GF JTLPS1.24 DATASHEETDATASHEET 9 | Version 1.5 | 2023-02-23 Relative Spectral Emission 5) Irel = f (λ); IF = 150 mA; TJ = 25 °C GF JTLPS1.24 350 400 450 500 550 600 650 700 750 80 0 λ / nm 0,0 0,2 0,4 0,6 0,8 1,0Irel : Vλ : far red Radiation Characteristics 5) Irel = f (ϕ); TJ = 25 °C GF JTLPS1.24 -100° -90° -80° -70° -60° -50° -40° -30° ϕ /° 0,0 0,2 0,4 0,6 0,8 1,0 Irel

GF JTLPS1.24 DATASHEETDATASHEET 10 | Version 1.5 | 2023-02-23 Forward current 5) IF = f(VF); TJ = 25 °C GF JTLPS1.24 VF /V 100 120 140 160 180IF /m A Relative Radiant Power 5), 6) ΦE/ΦE(150 mA) = f(IF); TJ = 25 °C GF JTLPS1.24 10 40 60 80 100 140 180 IF /m A 0,0 0,2 0,4 0,6 0,8 1,0 1,2 Φe Φe(150mA) Centroid Wavelength 5) Δλcentr = f(IF); TJ = 25 °C GF JTLPS1.24 10 40 60 80 100 140 180 IF /m A 6∆λ centr /n m

GF JTLPS1.24 DATASHEETDATASHEET 11 | Version 1.5 | 2023-02-23 Forward Voltage 5) ΔVF = VF - VF(25 °C) = f(Tj); IF = 150 mA GF JTLPS1.24 -40- 20 02 04 06 08 0 100 120 Tj /° C -0,3 -0,2 -0,1 0,0 0,1 0,2 0,3∆VF /V Relative Radiant Power 5) ΦE/ΦE(25 °C) = f(Tj); IF = 150 mA GF JTLPS1.24 -40- 20 02 04 06 08 0 100 120 Tj /° C 0,0 0,2 0,4 0,6 0,8 1,0 1,2Φe Φe (25°C) Centroid Wavelength 5) Δλcentr = λcentr - λcentr(25 °C) = f(Tj); IF = 150 mA GF JTLPS1.24 -40- 20 02 04 06 08 0 100 120 Tj /° C -10 20∆λ centr /n m

GF JTLPS1.24 DATASHEETDATASHEET 12 | Version 1.5 | 2023-02-23 Max. Permissible Forward Current IF = f(T) 0 20 40 60 80 100 Ts / °C 100 120 140 160 180 200IF / mA GF JTLPS1.24 Don't use below 10 mA

GF JTLPS1.24 DATASHEETDATASHEET 13 | Version 1.5 | 2023-02-23 Dimensional Drawing 7) Further Information: Approximate Weight: 20.0 mg Package marking: Anode

GF JTLPS1.24 DATASHEETDATASHEET 14 | Version 1.5 | 2023-02-23 Recommended Solder Pad 7) For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. Package not suitable for ultra sonic cleaning.

GF JTLPS1.24 DATASHEETDATASHEET 15 | Version 1.5 | 2023-02-23 Reflow Soldering Profile Product complies to MSL Level 3 acc. to JEDEC J-STD-020E 00 s OHA04525 100 150 200 250 300 50 100 150 200 250 300 t T St t Pt Tp240 ˚C 217 ˚C 245 ˚C 25 ˚C L Profile Feature Symbol Pb-Free (SnAgCu) Assembly Unit Minimum Recommendation Maximum Ramp-up rate to preheat*) 25 °C to 150 °C 2 3 K/s Time tS TSmin to TSmax tS 60 100 120 s Ramp-up rate to peak*) TSmax to TP 2 3 K/s Liquidus temperature TL 217 °C Time above liquidus temperature tL 80 100 s Peak temperature TP 245 260 °C Time within 5 °C of the specified peak temperature TP - 5 K tP 10 20 30 s Ramp-down rate* TP to 100 °C 3 6 K/s Time 25 °C to TP 480 s All temperatures refer to the center of the package, measured on the top of the component * slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range

GF JTLPS1.24 DATASHEETDATASHEET 16 | Version 1.5 | 2023-02-23 Taping 7)

GF JTLPS1.24 DATASHEETDATASHEET 17 | Version 1.5 | 2023-02-23 Tape and Reel 8) Reel Dimensions A W Nmin W1 W2 max Pieces per PU 330 mm 8 + 0.3 / - 0.1 mm 60 mm 8.4 + 2 mm 14.4 mm 10000

GF JTLPS1.24 DATASHEETDATASHEET 18 | Version 1.5 | 2023-02-23 Barcode-Product-Label (BPL) Dry Packing Process and Materials 7) OHA00539 OSRAM Moisture-sensitive label or print Barcode label Desiccant Humidity indicator Barcode label OSRAM Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. WET Do not eat. Comparator check dot parts still adequately dry. examine units, if necessary examine units, if necessary 15% 10%bake units bake units If wet, change desiccant If wet, Humidity Indicator MIL-I-8835 If wet, M oisture Level 3 Floor tim e 168 Hours M oisture Level 6 Floor tim e 6 Hours a) Hum idity Indicator Card is > 10% when read at 23 ˚C ± 5 ˚C, or reflow, vapor-phase reflow, or equivalent processing (peak package 2. After this bag is opened, devices that will be subjected to infrared 1. Shelf life in sealed bag: 24 m onths at < 40 ˚C and < 90% relative hum idity (RH). M oisture Level 5a at factory conditions of (if blank, seal date is identical with date code). a) M ounted within b) Stored at body tem 3. Devices require baking, before m ounting, if: Bag seal date M oisture Level 1 M oisture Level 2 M oisture Level 2a4. If baking is required, b) 2a or 2b is not m et. Date and tim e opened: reference IPC/JEDEC J-STD-033 for bake procedure. Floor tim e see below If blank, see bar code label Floor tim e > 1 Year Floor tim e 1 Year Floor tim e 4 W eeks10% RH. M oisture Level 4 M oisture Level 5 ˚C). OPTO SEMICONDUCTORS MOISTURE SENSITIVE This bag contains CAUTION Floor tim e 72 Hours Floor tim e 48 Hours Floor tim e 24 Hours 30 ˚C/60% RH. LEVEL If blank, see bar code label Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card according JEDEC-STD-033.

GF JTLPS1.24 DATASHEETDATASHEET 19 | Version 1.5 | 2023-02-23 Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this data sheet fall into the class low risk (exposure time 100 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. When looking at bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoy- ance, visual impairment, and even accidents, depending on the situation. Subcomponents of this device contain, in addition to other substances, metal filled materials including silver. Metal filled materials can be affected by environments that contain traces of aggressive substances. There- fore, we recommend that customers minimize device exposure to aggressive substances during storage, production, and use. Devices that showed visible discoloration when tested using the described tests above did show no performance deviations within failure limits during the stated test duration. Respective failure limits are described in the IEC60810. This device is designed for specific/recommended applications only. Please consult OSRAM Opto Semiconductors Sales Staff in advance for detailed information on other non-recommended applications (e.g. automotive). Change management for this component is aligned with the requirements of the lighting market. For further application related information please visit www.osram-os.com/appnotes

GF JTLPS1.24 DATASHEETDATASHEET 20 | Version 1.5 | 2023-02-23 Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version on our website. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Product and functional safety devices/applications or medical devices/applications Our components are not developed, constructed or tested for the application as safety relevant component or for the application in medical devices. Our products are not qualified at module and system level for such application. In case buyer – or customer supplied by buyer – considers using our components in product safety devices/ applications or medical devices/applications, buyer and/or customer has to inform our local sales partner immediately and we and buyer and /or customer will analyze and coordinate the customer-specific request between us and buyer and/or customer.

GF JTLPS1.24 DATASHEETDATASHEET 21 | Version 1.5 | 2023-02-23 Glossary 1) Brightness: Brightness values are measured during a current pulse of typically 10 ms, with a tolerance of +/- 7%. 2) Wavelength: The wavelength is measured at a current pulse of typically 10 ms, with a tolerance of ± 0.5 nm. 3) Forward Voltage: The Forward voltage is measured during a current pulse duration of typically 1 ms with a tolerance of ± 0.05V . 4) Reverse Operation: Not designed for reverse operation. Continuous reverse operation can cause mi- gration and damage of the device. 5) Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devic- es, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could dif- fer from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 6) Characteristic curve: In the range where the line of the graph is broken, you must expect higher differ- ences between single devices within one packing unit. 7) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±0.1 and dimensions are specified in mm. 8) Tape and Reel: All dimensions and tolerances are specified acc. IEC 60286-3 and specified in mm.

GF JTLPS1.24 DATASHEETDATASHEET 22 | Version 1.5 | 2023-02-23

Revision History

1.0 2020-04-29 Features Derating (Diagrams) Electro - Optical Characteristics (Diagrams) 1.1 2020-05-19 Brightness Groups 1.2 2020-07-01 Dimensional Drawing 1.2 2020-07-06 Dimensional Drawing 1.3 2020-09-02 Dimensional Drawing Taping 1.4 2021-08-11 Brightness Groups Wavelength Groups 1.5 2023-02-23 Features New Layout Derating (Diagrams)

GF JTLPS1.24 DATASHEETDATASHEET 23 | Version 1.5 | 2023-02-23 Published by ams-OSRAM AG Tobelbader Strasse 30, 8141 Premstaetten, Austria Phone +43 3136 500-0 ams-osram.com © All rights reserved