G8SN ETC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Sub–Miniature Automotive PCB Relay G8SN Sub–Miniature Automotive PCB Relay General purpose automotive PCB relay. Compact size. Fully sealed construction. Fully automated process. Available Types Type Contact form Recommended loads G8SN–1C7–CUK 12DC (320 Ω ) SPDT Motor, Resistive G8SN–1C4–CU 12DC (210 Ω ) SPDT Lamp, Capacitive Contact Data Continuous carry current (max.) 10A Inrush current (L/R=7ms; 15ms max.) 30A Contact value drop (Initial value) 100m Ω Ratings/Specifications Rated voltage 12 VDC Operating voltage (max.) 16 VDC Coil resistance 320Ω 210Ω Pull in voltage (l d t t ) at +20°C (max.) 7.3 VDC 6.5 VDC (cold start) at +80°C (max.) 9.0 VDC 8.0 VDC Drop–out voltage at +20°C (min.) 1.0 VDC 0.9 VDC Max. Continuous carry current flow time (16 VDC at 80°C max.) Unlimited 15min. Operate time (max.) 10 ms Release time (max.) 5 ms Operating ambient temperature –40°C to +85°C Mechanical life (min.) 10,000,000 cycles (at frequency of 18,000 operations/hour) Electrical life (resistive load) (min.)100,000 cycles (14V; Continuous carry current) Weight 13g

  • Electric wing mirror
  • Car audio
  • Power radio aerial
  • Air–conditioning
  • Courtesy lamp
  • Power window
  • Electric sunroof
  • Intermittent windshield wiper
  • Passive restraint seatbelt
  • Power door lock
  • Power seat Dimensions RATED VOLTAGE 22.5 MAX. MARK TYPE LOT NO. 16.5 MAX. 16.5 MAX. 0.5 3.5 2.1 2 12.2 5.3 1.8 1.8 Ø1.6 4–Ø1.3 (All dimensions in mm) Omron PCB relays may be mounted in any convenient location that is dry and not exposed to excessive dust, S0 2, H2S or organic gases. All Omron PCB relays may be oriented in any desired direction. Whenever possible, however, care should be taken that they are not subjected to vibration along the direction of contact movement. If several relays are to be mounted on a single printed circuit board, they should be given at least 3mm clearance on all sides as shown in the diagram below. 3mm min. 3mm min. Note: Proper spacing is necessary to dissipate heat build–up from individual relays. Other than this, there are normally no restrictions depending on application. Please contact Omron for details. OMRON Electronics Ltd. 1, Apsley Way, Staples Corner, London NW2 7HF Phone: (0181) 450 4646 Fax: (0181) 450 8087 Cat. No. C–G8SN–001 LEADERS IN ELECTRONIC COMPONENTS In the interest of product improvement, specifications are subject to change without notice.