G5LA1ECF12DC ETC2

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

A Cubic, Single-pole 10A Power Relay ■ Small size and light weight

  • 19.6 x 15.6 x 15.6 mm, 7.5g ■ High Insulation
  • Dielectric strength 2,000V
  • Withstand impulse voltage 4,500V ■ High heat resistance and tracking performance
  • UL class-F available (-CF model)
  • IEC60335 GWT compliant
  • Tracking resistance CTI>250 ■ Environmental friendly ■ ROHS compliant. Contact form Switching capacity Model number Flux protection Fully sealed SPDT Standard G5LA-1 G5LA-14 G5LA-1-CF G5LA-14-CF High capacity (NC side)G5LA-1-E G5LA-14-E G5LA-1-E-CF G5LA-14-E-CF SPST-NOG5LA-1A G5LA-1A4 G5LA-1A-CF G5LA-1A4-CF

Ordering Information

Note:When ordering, add the rated coil voltage to the model number. Examples : G5LA-1 12VDC Rated Coil Voltage Model Number Legend 1. Number of Poles 1: 1 pole 2. Contact Form/Contact Construction None: SPDT A: SPST-NO 3. Sealing/Protective Construction None: Flux protection 4: Fully sealed 4. Contact Type None: Standard E: High capacity (NC side) 5. UL Insulation System None: Standard CF: Class F 6. Rated Coil Voltage G5LA--VDC 13 25 46 PCB Relay – G5LA PCB Power Relay – G5LE Power Relays ALL DIMENSIONS SHOWN ARE IN MILLIMETRES. To convert millimetres into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Dimensions Note: 1.All units are in millimetres unless otherwise indicated. 2.Orientation marks are indicated as follows: G5LE-14 G5LE-1A4 22.5 max. (21.6)* 16.5 max. (15.6)* 19.0 max. (18.5)* 0.5 3.5 0.2 1 1.2 0.4 Terminal Arrangement/Internal Connections (Bottom View) Mounting Holes (Bottom View) SPDT Tolerance: ±0.1 mm unless specified SPDT 12.2 2 (2.55) (2.25) Five, 1.3 dia. holes +0.2 (5.75) (2.25) G5LE-1 G5LE-1A *Average value 22.5 max. (21.6)* 19.0 max. (18.5)* 0.5 3.5 0.2 1 16.5 max. (15.6)* 1.2 0.4 Terminal Arrangement/Internal Connections (Bottom View) Mounting Holes (Bottom View) SPST-NO Tolerance: ±0.1 mm unless specified *Average value SPST-NO 12.2 2 (2.55) (2.25) (5.75) Four, 1.3 dia. holes+0.2 (2.25) CAT. No. K900-E2-01 G5LE-1 G5LE-14 G5LE-1-E G5LE-1-G G5LE-1A G5LE-1A4 G5LE-1A-E G5LE-1A-G Omron 08 Cat 1-302 5/10/07 15:39 Page 96

TextPCB Relay – G5LA Model Coil ratings Contact ratings G5LA 5 to 48 VDC NO: 10A, 277VAC, general use, 100,000 cycles 10A, 277VAC, general use, 85ºC, 50,000 cycles (-CF model) 15A, 125VAC, general use, 50,000 cycles 1/2Hp, 125VAC 1/2Hp, 250VAC 200W tungsten, 125VAC, 100,000 cycles NC: 10A, 125VAC, resistive 10A, 277VAC, general use, 100,000 cycles (-E model) ■ Approved Standards UL508 (UL File No. E41643) Model Coil ratings Contact ratings G5LA 5,6,9,12,18,24,48 VDC NO: 10A, 250VAC, cosφ=1, 85ºC, 1 sec - flux protection: 50,000 cycles - fully sealed: 10,000 cycles 10A, 250VAC, cosφ=1, 85ºC, 5 sec 12A, 125VAC, cosφ=1, 85ºC, 10,000 NC: 10A, 250VAC, cosφ=1, 85ºC, 25,000 NO/NC: 5A, 250VAC, cosφ=1, 85ºC - flux protection: 50,000 cycles - fully sealed: 10,000 cycles EN61810-1 (VDE Reg. No. B652) Model Coil ratings Contact ratings G5LA 5,9,12,24,48 VDC NO: 10A, 250VAC, resistive, 10,000 cycles 12A, 120VAC, resistive, 10,000 cycles NO/NC: 10A, 250VAC, resistive, 10,000 cycles (-E model) 12A, 250VAC, resistive, 10,000 cycles (-E model) GB15092.1 (CQC File No. CQC06001015477) ■ Characteristics Contact resistance100 mΩmax. Operate time10 ms max. Release time5 ms max. Max. switching frequencyMechanical: 18,000 operations/hr Electrical: 1,800 operations/hr (under rated load) Insulation resistance1,000MΩmin. (at 500 VDC) Dielectric strength2,000 VAC. 1mA 50/60Hz for 1 min between coil and contacts

750 VAC 1mA 50/60Hz for 1 min between contacts of same polarity

Vibration resistanceDestruction: 10 to 55Hz, 1.5mm double amplitude Malfunction: 10 to 55Hz, 1.5mm double amplitude Shock resistanceDestruction: 1,000 m/s2(approx. 100G) Malfunction: 100 m/s2(approx. 10G) EnduranceMechanical: 10,000,000 operations min. Electrical: 100,000 operations typical Ambient temperatureOperating: -40° to 85° (with no icing) Storage: -40° to 85° (with no icing) Ambient humidityOperating: 35% to 85% Storage: 35% to 85% WeightApprox. 7.5g PCB Relay – G5LA Power Relays ■ Coil Ratings ■ Contact Ratings Item Standard model High capacity (-E) model Contact materialAgSnO2 LoadResistive load (cosφ=1) Rated load NO10A at 250VAC 10A at 24VDC NO/NC5A/5A at 125VAC 5A/5A at 24VDC 5A/5A at 250VAC 5A/5A at 24VDC Rated carry current10A(NO), 5A(NC) 10A Max. switching voltage250VAC, 24VDC Max. switching current10A(NO), 5A(NC) 10A Max. switching power NOAC2,500VA, DC240W NO/NCAC625VA, DC120W AC1,250VAC, DC120W Failure rate (reference value)100 mA at 5 VDC Rated voltage 5 VDC 9 VDC 12 VDC 24 VDC 48 VDC Rated current72 mA 40 mA 30 mA 15 mA 10 mA Coil resistance69.4 Ω225 Ω400 Ω1600 Ω4800 ΩΩ Must operate voltage75% max. of rated voltage Must release voltage10% min. of rated voltage Max. voltage130% of rated voltage at 85˚C, 170% of rated voltage at 23˚C Power consumption360 mW480mW Note: The rated current and coil resistance are measured at a coil temperature of 23˚C with a tolerance of ±10%. Note: P level: λ60 = 0.1 x 10-6/operation Note: Values in the above table are the initial values. Specifications Omron 08 Cat 1-302 5/10/07 15:39 Page 98

TextPCB Relay – G5LA Model Coil ratings Contact ratings G5LA 5 to 48 VDC NO: 10A, 277VAC, general use, 100,000 cycles 10A, 277VAC, general use, 85ºC, 50,000 cycles (-CF model) 15A, 125VAC, general use, 50,000 cycles 1/2Hp, 125VAC 1/2Hp, 250VAC 200W tungsten, 125VAC, 100,000 cycles NC: 10A, 125VAC, resistive 10A, 277VAC, general use, 100,000 cycles (-E model) ■ Approved Standards UL508 (UL File No. E41643) Model Coil ratings Contact ratings G5LA 5,6,9,12,18,24,48 VDC NO: 10A, 250VAC, cosφ=1, 85ºC, 1 sec - flux protection: 50,000 cycles - fully sealed: 10,000 cycles 10A, 250VAC, cosφ=1, 85ºC, 5 sec 12A, 125VAC, cosφ=1, 85ºC, 10,000 NC: 10A, 250VAC, cosφ=1, 85ºC, 25,000 NO/NC: 5A, 250VAC, cosφ=1, 85ºC - flux protection: 50,000 cycles - fully sealed: 10,000 cycles EN61810-1 (VDE Reg. No. B652) Model Coil ratings Contact ratings G5LA 5,9,12,24,48 VDC NO: 10A, 250VAC, resistive, 10,000 cycles 12A, 120VAC, resistive, 10,000 cycles NO/NC: 10A, 250VAC, resistive, 10,000 cycles (-E model) 12A, 250VAC, resistive, 10,000 cycles (-E model) GB15092.1 (CQC File No. CQC06001015477) ■ Characteristics Contact resistance100 mΩmax. Operate time10 ms max. Release time5 ms max. Max. switching frequencyMechanical: 18,000 operations/hr Electrical: 1,800 operations/hr (under rated load) Insulation resistance1,000MΩmin. (at 500 VDC) Dielectric strength2,000 VAC. 1mA 50/60Hz for 1 min between coil and contacts Vibration resistanceDestruction: 10 to 55Hz, 1.5mm double amplitude Malfunction: 10 to 55Hz, 1.5mm double amplitude Shock resistanceDestruction: 1,000 m/s2(approx. 100G) Malfunction: 100 m/s2(approx. 10G) EnduranceMechanical: 10,000,000 operations min. Electrical: 100,000 operations typical Ambient temperatureOperating: -40° to 85° (with no icing) Storage: -40° to 85° (with no icing) Ambient humidityOperating: 35% to 85% Storage: 35% to 85% WeightApprox. 7.5g PCB Relay – G5LA Power Relays ■ Coil Ratings ■ Contact Ratings Item Standard model High capacity (-E) model Contact materialAgSnO2 LoadResistive load (cosφ=1) Rated load NO10A at 250VAC 10A at 24VDC NO/NC5A/5A at 125VAC 5A/5A at 24VDC 5A/5A at 250VAC 5A/5A at 24VDC Rated carry current10A(NO), 5A(NC) 10A Max. switching voltage250VAC, 24VDC Max. switching current10A(NO), 5A(NC) 10A Max. switching power NOAC2,500VA, DC240W NO/NCAC625VA, DC120W AC1,250VAC, DC120W Failure rate (reference value)100 mA at 5 VDC Rated voltage 5 VDC 9 VDC 12 VDC 24 VDC 48 VDC Rated current72 mA 40 mA 30 mA 15 mA 10 mA Coil resistance69.4 Ω225 Ω400 Ω1600 Ω4800 ΩΩ Must operate voltage75% max. of rated voltage Must release voltage10% min. of rated voltage Max. voltage130% of rated voltage at 85˚C, 170% of rated voltage at 23˚C Power consumption360 mW480mW Note: The rated current and coil resistance are measured at a coil temperature of 23˚C with a tolerance of ±10%. Note: P level: λ60 = 0.1 x 10-6/operation Note: Values in the above table are the initial values. Specifications Omron 08 Cat 1-302 5/10/07 15:39 Page 98

PCB Relay – G5LA ALL DIMENSIONS SHOWN ARE IN MILLIMETRES. To convert millimetres into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. CAT. No. K901-E2-01 Engineering Data PCB Relay – G5LA Power Relays Dimensions Note:All units are in millimeters unless otherwise indicated. ■ SPDT Models ■ SPST-NO Models Omron 08 Cat 1-302 5/10/07 15:39 Page 100

PCB Relay – G5LA ALL DIMENSIONS SHOWN ARE IN MILLIMETRES. To convert millimetres into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. CAT. No. K901-E2-01 Engineering Data PCB Relay – G5LA Power Relays Dimensions Note:All units are in millimeters unless otherwise indicated. ■ SPDT Models ■ SPST-NO Models Omron 08 Cat 1-302 5/10/07 15:39 Page 100