G40A ETC
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
www.men.de/products/g40a/ G40A Embedded Single Board Computer with ARM Cortex A72 3U CompactPCI Serial » NXP QorIQ, 4 cores » Up to 8 GB DDR4 DRAM soldered, ECC » Non-volatile SRAM » Standard front I/O: 3 Gb Ethernet, 1 USB 3.0 host, 1 USB configuration port (RS232) » Standard rear I/O: 2 PCIe lanes, 4 USB 2.0, 1 SATA, 8 Gb Ethernet » PICMG CPCI-S.0 CompactPCI Serial » -40°C to +85°C operating temperature » Fanless operation possible » Virtualization-ready Virtualization-Ready The G40A is a high-performance 3U CompactPCI Serial multicore CPU platform equipped with the NXP ARM Cortex A72 LS1046A processor. Featuring ARM core technologies and NXP data processing accelerators and I/O interfaces, G40A secures your application for the future by being full-virtualization ready - memory and I/O sub-systems can be virtualized - and available for 15 years from product introduction. Wide Range of I/O, Network Connectivity The G40A provides modern serial interface technologies such as PCI Express generation 3.0 (up to 8 Gbit/s), USB 3.0, SATA generation 3 (up to 6 Gbit/s). It is network connection ready by providing front Ethernet interfaces and an Ethernet switch. Nevertheless, compatibility with legacy interfaces is ensured with communications interfaces such as UART, I2C, SPI, etc. Board Supervision and Management The G40A is monitored using an MEN proprietary board management controller (BMC) which controls parameters such as voltages, temperature and provides a user configurable watchdog, making it ready for applications where functional safety is required. It supports low-power mode to enable Wake-on-LAN when the board's power supply is off. Extensive Memory The memory configuration of the G40A includes a fast DDR4 DRAM with ECC soldered to the board to guarantee optimum shock and vibration resistance. A non-volatile SRAM, an eMMC NAND Flash device and a microSD card can also be assembled offering space for user applications or usable as a local boot medium. Perfect for Harsh Environments With small 3U dimensions, G40A is perfectly suited for use in harsh environments, making it an ideal solution where space is limited but high processing capabilities are needed, e.g. in data collection applications on board trains. The board can be ordered in a version which enables fanless operation. The G40A comes with a tailored heat sink. All components are soldered for protection against shock and vibration according to applicable railway standards. The G40A is also coated so that it can be used in humid and dusty environments. Data Sheet G40A Data Sheet l 2018-01-18 Page 1
www.men.de/products/g40a/ Diagram SATA (3 Gb) Gb EthernetF NXP ARM Cortex A72 Processor PCIe 2.0 x1 UART ECC DDR4 SDRAM RTC EEPROM I2C Temperature Sensor BMC USB-to-UARTUSB 2.0 (RS232) UARTF
10 GPIO
9 GPIO
ETH_SW IO_EXP I2C SPI SGMII SGMII RGMII PHY Gb Ethernet Gb Ethernet Gb Ethernet CPCI- S.0 P1-P3, P5-P6 R I2C USB 3.0F PHY Gb Ethernet F SGMII PHYGb Ethernet F SGMII USB 2.0 Non-volatile SRAM microSD B FF r o n t R e a rR BO n b o a r d Options eMMC G40A Data Sheet l 2018-01-18 Page 2
www.men.de/products/g40a/ Technical Data CPU n The following CPU types are supported: o NXP ARM Cortex A72 LS1046A, 4 cores, 1.2 GHz o NXP ARM Cortex A72 LS1046A, 4 cores, 1.4 GHz o NXP ARM Cortex A72 LS1046A, 4 cores, 1.6 GHz Security n QorIQ Trust Architecture (Secure Boot) Memory n System RAM o Soldered DDR4, ECC support o 1 GB o 2 GB o 4 GB o 8 GB n Boot Flash o 32 MB n Non-volatile SRAM o 2 MB Mass Storage n The following mass storage devices can be assembled: o eMMC (soldered) o microSD card External Interfaces n SATA o 1x SATA Revision 3.x, backplane n USB o 1x USB 3.0, Type A o 1x USB-to-UART, Type A o 4x USB 2.0, backplane n PCI Express o 2x PCIe 2.0, x1, backplane n Ethernet o 3x 1000BASE-T, M12, X-coded o 8x 1000BASE-T, backplane n Serial o 1x UART, backplane n I2C o 1x, up to 400 kbit/s n SPI o 1x, with two chip selects n GPIO o 10x, from processor o 9x, from I/O expander n Reset signals o Carrier board reset output o System reset input n LED o Status: board status o Ethernet: link, activity o CPCI hot-plug Supervision and Control n Board management controller n Watchdog timer n Temperature measurement n Real-time clock with supercapacitor backup G40A Data Sheet l 2018-01-18 Page 3
www.men.de/products/g40a/ Technical Data Backplane Standard n Compliance with CompactPCI Serial PICMG CPCI-S.0 Specification n System slot Electrical Specifications n Supply voltage o +12 V (-5%/+5%) Mechanical Specifications n Dimensions o 3U, 4 HP Environmental Specifications n Temperature range (operation) o -40°C to +85°C (qualified components), compliant with EN 50155:2007, class TX n Temperature range (storage): -50°C to +85°C, compliant with EN 60068-2-1 - Ab, EN 60068-2-2 - Bb n Cooling concept o Depending on heat sink design o Air-cooled, airflow 1.5 m/s min. o Fanless operation, natural convection (on request, with special heat sink) n Humidity: EN 50155:2007 (+25/+55 °C, 90-100 %) n Shock: EN61373:2010 o Location: Vehicle body (Cat. 1; Class B) n Vibration: EN61373: 2010 o Location: Vehicle body (Cat. 1; Class B) Reliability n MTBF: 548 000 h @ 40°C according to IEC/TR 62380 (RDF 2000) (model 02G040A00) Safety n Electrical Safety o EN 50155:2007 o EN 50153:2014 o EN 50124-1:2001 + A1:2003 + A2:2005 n Fire Protection o EN 45545-2, hazard level HL3 EMC n Radiated Emission o EN 50121-3-2:2015 n Conducted Emission o EN 50121-3-2:2015 n Immunity o EN 50121-3-2:2015 BIOS n U-Boot Universal Boot Loader Software Support n Linux G40A Data Sheet l 2018-01-18 Page 4
www.men.de/products/g40a/ Contact Information Germany France MEN Mikro Elektronik GmbH MEN Mikro Elektronik SAS Neuwieder Straße 3-7
90411 Nuremberg
18, rue René Cassin ZA de la Châtelaine
74240 Gaillard
sales@men.de www.men.de sales@men-france.fr www.men-france.fr USA China MEN Micro Inc. MEN Mikro Elektronik (Shanghai) Co., Ltd.
860 Penllyn Blue Bell Pike
Blue Bell, PA 19422 Phone 215-542-9575 Room 808-809, Jiaxing Mansion, No. 877 Dongfang Road
200122 Shanghai
sales@menmicro.com www.menmicro.com sales@men-china.cn www.men-china.cn Up-to-date information, documentation and ordering information: www.men.de/products/g40a/ MEN is not responsible for the results of any actions taken on the basis of information in the publication, nor for any error in or omission from the publication. MEN expressly disclaims all and any liability and responsibility to any person, whether a reader of the publication or not, in respect of anything, and of the consequences of anything, done or omitted to be done by any such person in reliance, whether wholly or partially, on the whole or any part of the contents of the publication. The correct function of MEN products in mission-critical and life-critical applications is limited to the environmental specification given for each product in the technical user manual.The correct function of MEN products under extended environmental conditions is limited to the individual requirement specification and subsequent validation documents for each product for the applicable use case and has to be agreed upon in writing by MEN and the customer.Should the customer purchase or use MEN products for any unintended or unauthorized application, the customer shall indemnify and hold MEN and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim or personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that MEN was negligent regarding the design or manufacture of the part. In no case is MEN liable for the correct function of the technical installation where MEN products are a part of. © 2018 MEN Holding G40A Data Sheet l 2018-01-18 Page 5